Skip to content
worldfires
BR · Brazil · –

Santo Antônio do Leverger fire, 17 August 2020 Santo Antônio do Leverger, Juscimeira, Barão de Melgaço

Out · last detection 29 Sept 2020, 16:54 UTC

The fire started on 17 August 2020 in Santo Antônio do Leverger, Brazil, and satellites saw it burning for 44 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 133,257 hectares from heat detections, spread across 5 municipalities.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

Other fire pages in the same area and on the same dates:

It is the 7th largest in Mato Grosso since 2016 (of 1872 with a page). Number 5 in Brazil in 2020, of 957.

Burnt area
133,257ha
GWIS perimeter (Copernicus)
Duration
44days
17 Aug 2020 – 29 Sept 2020
Municipalities hit
5
municipalities
Started on
17 Aug
2020
Heat detections
5,714
in a single hotspot: 407 MW
Danger at start
50
Very high · FWI index
Average daily power
2.2GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 17 Aug29 Sept
29 Sept 2020

How it evolved, day by day

17 Aug 2020 · 27 MW · 5 18 Aug 2020 · 318 MW · 8 19 Aug 2020 · 48 MW · 7 20 Aug 2020 · 15 MW · 3 21 Aug 2020 · 3 MW · 3 22 Aug 2020 · 13 MW · 2 23 Aug 2020 · 3,882 MW · 28 24 Aug 2020 · 15 MW · 5 25 Aug 2020 · 28 MW · 7 26 Aug 2020 · 391 MW · 23 27 Aug 2020 · 850 MW · 72 28 Aug 2020 · 1,070 MW · 90 29 Aug 2020 · 897 MW · 91 30 Aug 2020 · 1,126 MW · 154 31 Aug 2020 · 1,140 MW · 211 1 Sept 2020 · 609 MW · 145 2 Sept 2020 · 960 MW · 94 3 Sept 2020 · 990 MW · 66 4 Sept 2020 · 334 MW · 51 5 Sept 2020 · 1,553 MW · 132 6 Sept 2020 · 8,234 MW · 338 7 Sept 2020 · 3,400 MW · 321 8 Sept 2020 · 875 MW · 133 9 Sept 2020 · 3,701 MW · 129 10 Sept 2020 · 2,168 MW · 263 11 Sept 2020 · 14,629 MW · 386 12 Sept 2020 · 12,065 MW · 574 13 Sept 2020 · 22,056 MW · 1125 14 Sept 2020 · 5,342 MW · 470 15 Sept 2020 · 1,422 MW · 219 16 Sept 2020 · 3,169 MW · 289 17 Sept 2020 · 2,077 MW · 128 18 Sept 2020 · 208 MW · 32 19 Sept 2020 · 115 MW · 21 20 Sept 2020 · 3 MW · 2 21 Sept 2020 · 16 MW · 5 22 Sept 2020 · 18 MW · 14 23 Sept 2020 · 5 MW · 1 25 Sept 2020 · 75 MW · 5 26 Sept 2020 · 106 MW · 24 27 Sept 2020 · 423 MW · 19 28 Sept 2020 · 3 MW · 2 29 Sept 2020 · 105 MW · 17
17 Aug 26 Aug 4 Sept 13 Sept 22 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

41°high
49km/h · peak gust
12%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

9% of the perimeter overlaps earlier fires recorded since 2016: 1,048 ha in 2016, 10,899 ha in 2017, 310 ha in 2019.

How big is it?

20 km
It burned the equivalent of 84% of the area of London (1,333 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Santo Antônio do Leverger 650,877 inhabitants where it started
    98,604 ha reached on 17 Aug
    10 %
  2. Juscimeira 11,480 inhabitants
    15,047 ha reached on 18 Aug
    5.5 %
  3. Barão de Melgaço 15,246 inhabitants
    9,809 ha reached on 17 Aug
    0.8 %
  4. Jaciara 28,569 inhabitants
    6,234 ha reached on 30 Aug
    2.6 %
  5. Rondonópolis 244,911 inhabitants
    4,312 ha reached on 25 Aug
    0.9 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area5.3 ha
Residents≈ 200

Inside the perimeter there were about 5.3 hectares of built-up land and about 200 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
17 Aug 37.1 °C 26 % 28 km/h 0.0 mm Very high 50
18 Aug 38.6 °C 23 % 37 km/h 0.0 mm Extreme 59
19 Aug 38.9 °C 21 % 34 km/h 0.0 mm Extreme 62
20 Aug 28.0 °C 43 % 49 km/h 0.0 mm Very high 47
21 Aug 20.6 °C 50 % 40 km/h 0.0 mm High 34
22 Aug 22.4 °C 48 % 27 km/h 0.0 mm High 25
23 Aug 30.6 °C 40 % 24 km/h 0.0 mm High 24
24 Aug 36.3 °C 27 % 28 km/h 0.0 mm Very high 41
25 Aug 36.6 °C 28 % 35 km/h 0.0 mm Very high 46
26 Aug 37.5 °C 28 % 34 km/h 0.0 mm Very high 47
27 Aug 38.5 °C 24 % 32 km/h 0.0 mm Very high 44
28 Aug 37.7 °C 15 % 42 km/h 0.0 mm Extreme 66
29 Aug 38.5 °C 14 % 34 km/h 0.0 mm Extreme 64
30 Aug 38.9 °C 18 % 29 km/h 0.0 mm Extreme 58
31 Aug 38.7 °C 19 % 30 km/h 0.0 mm Extreme 65
1 Sept 37.1 °C 24 % 22 km/h 0.0 mm Very high 40
2 Sept 35.8 °C 21 % 32 km/h 0.0 mm Extreme 53
3 Sept 36.5 °C 25 % 20 km/h 0.0 mm Very high 44
4 Sept 37.4 °C 18 % 27 km/h 0.0 mm Extreme 54
5 Sept 37.9 °C 20 % 33 km/h 0.0 mm Extreme 61
6 Sept 38.5 °C 19 % 33 km/h 0.0 mm Very high 49
7 Sept 38.3 °C 21 % 29 km/h 0.0 mm Extreme 53
8 Sept 37.5 °C 25 % 18 km/h 0.0 mm Very high 39
9 Sept 39.3 °C 19 % 26 km/h 0.0 mm Extreme 56
10 Sept 39.7 °C 12 % 30 km/h 0.0 mm Extreme 54
11 Sept 39.9 °C 14 % 38 km/h 0.0 mm Very extreme 71
12 Sept 39.6 °C 14 % 33 km/h 0.0 mm Extreme 68
13 Sept 39.4 °C 14 % 42 km/h 0.0 mm Very extreme 74
14 Sept 38.3 °C 18 % 34 km/h 0.0 mm Extreme 60
15 Sept 37.5 °C 24 % 22 km/h 0.0 mm Very high 45
16 Sept 38.6 °C 20 % 26 km/h 0.0 mm Extreme 53
17 Sept 38.7 °C 20 % 30 km/h 0.0 mm Extreme 55
18 Sept 38.0 °C 24 % 23 km/h 0.0 mm Extreme 51
19 Sept 38.6 °C 24 % 22 km/h 0.0 mm Very high 45
20 Sept 33.0 °C 37 % 33 km/h 0.0 mm Very high 44
21 Sept 34.1 °C 36 % 31 km/h 0.3 mm Very high 38
22 Sept 32.4 °C 44 % 31 km/h 0.3 mm High 29
23 Sept 35.8 °C 34 % 27 km/h 0.2 mm High 31
24 Sept 38.5 °C 26 % 31 km/h 0.0 mm Very high 44
25 Sept 40.0 °C 18 % 35 km/h 0.0 mm Extreme 53
26 Sept 38.0 °C 29 % 43 km/h 0.0 mm Extreme 60
27 Sept 38.4 °C 28 % 37 km/h 0.0 mm Extreme 54
28 Sept 38.9 °C 28 % 22 km/h 0.0 mm Very high 45
29 Sept 41.2 °C 18 % 28 km/h 0.0 mm Extreme 52
30 Sept after 42.6 °C 13 % 27 km/h 0.0 mm Extreme 64
1 Oct after 42.0 °C 18 % 28 km/h 0.0 mm Extreme 64
2 Oct after 39.6 °C 22 % 22 km/h 0.0 mm Extreme 55
3 Oct after 40.6 °C 22 % 23 km/h 0.0 mm Extreme 52
4 Oct after 42.0 °C 20 % 21 km/h 0.0 mm Extreme 53
5 Oct after 41.7 °C 21 % 23 km/h 0.0 mm Very high 47
6 Oct after 41.9 °C 20 % 25 km/h 0.0 mm Extreme 60
7 Oct after 40.8 °C 23 % 25 km/h 0.0 mm Very high 49
8 Oct after 42.2 °C 17 % 28 km/h 0.0 mm Extreme 52
9 Oct after 41.4 °C 21 % 34 km/h 0.0 mm Extreme 64

Its twins: fires that started in the same weather

It started with an FWI of 49.9, a minimum humidity of 26% and more than two months without rain. Fires in the area that started in weather like this since 2016: 19.

FWI at the start 49.9
Minimum humidity 26 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Santo Antônio do Leverger fire, July 2020
3,208 ha 9 days FWI 51.0 Min. humidity 25 % 35 km away, in 2020

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

9 days
median duration
4,815 ha
median area
21 %
went past 10,000 ha
2.2 mm
rain at the end (median; 7 of 19 had it)

It was 27.7 times larger than the median of its twins and lasted 44 days, against 9 days.

None of its 19 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 12 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
49km/h · max. gust

It was considered over on 29 Sept, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 7 of 19, with a median of 2.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 10 Aug 2020
After · 6 Oct 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 5,714Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Santo Antônio do Leverger fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 17 August 2020 to 29 September 2020 (44 days). The perimeter dates it from 22 August 2020 to 22 September 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 133,257 hectares (1,332.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 5 municipalities: Santo Antônio do Leverger (98,604 ha, 10 %); Juscimeira (15,047 ha, 5.5 %); Barão de Melgaço (9,809 ha, 0.8 %); Jaciara (6,234 ha, 2.6 %); Rondonópolis (4,312 ha, 0.9 %).
What was the weather like?
During the fire the temperature reached 41.2 °C, humidity dropped to 12 % and gusts hit 49 km/h. The fire danger index (FWI) reached 74, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 19. Their median duration was 9 days and their median area 4,815 ha; 21 % went past 10,000 ha. None of its 19 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 12 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 22 September 2020 → 29 September 2020.
  2. Start date: 22 August 2020 → 17 August 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 22 August 2020 to 22 September 2020. 5,714 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.