Skip to content
worldfires
BR · Brazil · –

Santo Antônio do Leverger fire, 27 August 2024 Santo Antônio do Leverger, Barão de Melgaço

Out · last detection

The fire started on in Santo Antônio do Leverger, Brazil, and satellites saw it burning for 44 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 24,162 hectares from heat detections, spread across 2 municipalities.

It is number 145 by size of the 1872 fires with a page that started in Mato Grosso since 2016. Number 122 in Brazil in 2024, of 1301.

Burnt area
24,162ha
GWIS perimeter (Copernicus)
Duration
44days
27 Aug 2024 – 9 Oct 2024
Municipalities hit
2
municipalities
Started on
27 Aug
2024
Heat detections
1,314
in a single hotspot: 206 MW
Danger at start
38
Very high · FWI index
Average daily power
401MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 27 Aug9 Oct
9 Oct 2024

How it evolved, day by day

27 Aug 2024 · 3 MW · 2 29 Aug 2024 · 13 MW · 2 30 Aug 2024 · 157 MW · 12 31 Aug 2024 · 26 MW · 5 1 Sept 2024 · 634 MW · 26 2 Sept 2024 · 398 MW · 51 3 Sept 2024 · 359 MW · 24 4 Sept 2024 · 1,288 MW · 69 5 Sept 2024 · 333 MW · 80 6 Sept 2024 · 52 MW · 29 7 Sept 2024 · 2,328 MW · 70 8 Sept 2024 · 295 MW · 43 9 Sept 2024 · 443 MW · 45 10 Sept 2024 · 1,698 MW · 37 11 Sept 2024 · 616 MW · 64 12 Sept 2024 · 581 MW · 57 13 Sept 2024 · 522 MW · 28 14 Sept 2024 · 624 MW · 27 15 Sept 2024 · 77 MW · 9 16 Sept 2024 · 13 MW · 6 17 Sept 2024 · 91 MW · 19 18 Sept 2024 · 679 MW · 22 19 Sept 2024 · 317 MW · 12 20 Sept 2024 · 44 MW · 15 21 Sept 2024 · 217 MW · 25 22 Sept 2024 · 159 MW · 18 23 Sept 2024 · 92 MW · 10 24 Sept 2024 · 51 MW · 6 25 Sept 2024 · 21 MW · 3 26 Sept 2024 · 23 MW · 6 27 Sept 2024 · 71 MW · 6 28 Sept 2024 · 4 MW · 4 29 Sept 2024 · 183 MW · 15 30 Sept 2024 · 322 MW · 29 1 Oct 2024 · 470 MW · 25 2 Oct 2024 · 28 MW · 11 3 Oct 2024 · 1,029 MW · 66 4 Oct 2024 · 186 MW · 46 5 Oct 2024 · 496 MW · 106 6 Oct 2024 · 1,036 MW · 88 7 Oct 2024 · 203 MW · 53 8 Oct 2024 · 129 MW · 19 9 Oct 2024 · 939 MW · 24
27 Aug 7 Sept 15 Sept 24 Sept 3 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

42°high
50km/h · peak gust
11%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 2.9 mm on 10 Oct.

This area had burned before

37% of the perimeter overlaps earlier fires recorded since 2016: 13 ha in 2017, 12,871 ha in 2019, 11,883 ha in 2020, 4,333 ha in 2022, 12 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 8,902 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 15% of the area of London (242 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Santo Antônio do Leverger 650,877 inhabitants where it started
    16,182 ha reached on 27 Aug
    1.7 %
  2. Barão de Melgaço 15,246 inhabitants
    8,650 ha reached on 20 Sept
    0.8 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area1.5 ha
Residents≈ 60

Inside the perimeter there were about 1.5 hectares of built-up land and about 60 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
27 Aug 34.8 °C 21 % 23 km/h 0.0 mm Very high 38
28 Aug 38.0 °C 16 % 32 km/h 0.0 mm Extreme 64
29 Aug 38.6 °C 17 % 50 km/h 0.0 mm Very extreme 78
30 Aug 38.2 °C 15 % 44 km/h 0.0 mm Very extreme 74
31 Aug 38.2 °C 19 % 25 km/h 0.0 mm Very high 48
1 Sept 36.7 °C 21 % 27 km/h 0.0 mm Very high 43
2 Sept 38.2 °C 17 % 18 km/h 0.0 mm Very high 46
3 Sept 39.8 °C 15 % 31 km/h 0.0 mm Extreme 64
4 Sept 39.9 °C 14 % 40 km/h 0.0 mm Very extreme 74
5 Sept 33.9 °C 31 % 40 km/h 0.0 mm Extreme 59
6 Sept 36.9 °C 23 % 17 km/h 0.0 mm Very high 41
7 Sept 40.5 °C 14 % 32 km/h 0.0 mm Very extreme 70
8 Sept 39.8 °C 12 % 46 km/h 0.0 mm Very extreme 83
9 Sept 39.2 °C 11 % 48 km/h 0.0 mm Very extreme 83
10 Sept 39.6 °C 13 % 43 km/h 0.0 mm Very extreme 74
11 Sept 39.8 °C 14 % 46 km/h 0.0 mm Very extreme 80
12 Sept 39.3 °C 17 % 37 km/h 0.0 mm Extreme 70
13 Sept 40.3 °C 16 % 31 km/h 0.0 mm Extreme 66
14 Sept 38.3 °C 21 % 42 km/h 0.0 mm Extreme 55
15 Sept 33.8 °C 38 % 35 km/h 0.0 mm High 37
16 Sept 28.9 °C 55 % 34 km/h 0.9 mm High 34
17 Sept 36.4 °C 32 % 21 km/h 0.0 mm High 30
18 Sept 40.3 °C 21 % 32 km/h 0.0 mm Extreme 57
19 Sept 38.3 °C 27 % 46 km/h 0.0 mm Very extreme 71
20 Sept 39.4 °C 24 % 34 km/h 0.0 mm Extreme 61
21 Sept 37.6 °C 25 % 23 km/h 0.0 mm Extreme 61
22 Sept 41.0 °C 17 % 30 km/h 0.0 mm Extreme 62
23 Sept 40.3 °C 20 % 30 km/h 0.0 mm Extreme 57
24 Sept 40.2 °C 22 % 35 km/h 0.0 mm Extreme 61
25 Sept 39.7 °C 24 % 37 km/h 0.0 mm Extreme 60
26 Sept 39.4 °C 29 % 36 km/h 0.4 mm Extreme 56
27 Sept 30.4 °C 48 % 31 km/h 0.0 mm High 32
28 Sept 36.3 °C 30 % 19 km/h 1.2 mm High 30
29 Sept 39.9 °C 23 % 34 km/h 0.0 mm Very high 42
30 Sept 39.7 °C 22 % 34 km/h 0.0 mm Extreme 59
1 Oct 39.4 °C 26 % 35 km/h 0.0 mm Extreme 56
2 Oct 37.7 °C 33 % 30 km/h 0.0 mm Very high 42
3 Oct 36.8 °C 39 % 29 km/h 0.2 mm Very high 43
4 Oct 38.8 °C 29 % 24 km/h 0.2 mm High 38
5 Oct 41.0 °C 25 % 27 km/h 0.0 mm Very high 48
6 Oct 42.1 °C 14 % 23 km/h 0.0 mm Extreme 52
7 Oct 39.4 °C 27 % 38 km/h 0.0 mm Extreme 51
8 Oct 40.3 °C 27 % 38 km/h 0.0 mm Extreme 57
9 Oct 37.0 °C 35 % 34 km/h 1.4 mm Very high 46
10 Oct after 33.3 °C 51 % 35 km/h 2.9 mm Low 9

Its twins: fires that started in the same weather

It started with an FWI of 38.5, a minimum humidity of 21% and more than two months without rain. Fires in the area that started in weather like this since 2016: 17.

FWI at the start 38.5
Minimum humidity 21 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Barão de Melgaço fire, September 2021
5,111 ha 15 days FWI 41.1 Min. humidity 19 % 78 km away, in 2021

First rain (1 mm or more) after it ended: 1.8 mm on 8 Oct.

What happened to them

15 days
median duration
8,989 ha
median area
41 %
went past 10,000 ha
2.9 mm
rain at the end (median; 7 of 17 had it)

It was 2.7 times larger than the median of its twins and lasted 44 days, against 15 days.

Only 4 of its 17 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 10 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.9 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.9 mmfirst rain
10 Octthe day after it ended
50km/h · max. gust

It was considered over on 9 Oct, and on 10 Oct 2.9 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 7 of 17, with a median of 2.9 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 20 Aug 2024
After · 16 Oct 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 25 September 2024 the air beside the fire reached 169 µg/m³ of PM2.5. That day averaged 91: 6.1 times the WHO daily guideline (15).

PM2.5 peak169 µg/m³
Days over the guideline49 days
PM10244 µg/m³
Optical depth3.57
20 Aug1 Sept13 Sept25 Sept7 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1,314Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Santo Antônio do Leverger fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 27 August 2024 to 9 October 2024 (44 days). The perimeter dates it from 29 August 2024 to 9 October 2024.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 24,162 hectares (241.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Santo Antônio do Leverger (16,182 ha, 1.7 %); Barão de Melgaço (8,650 ha, 0.8 %).
What was the weather like?
During the fire the temperature reached 42.1 °C, humidity dropped to 11 % and gusts hit 50 km/h. The fire danger index (FWI) reached 83, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 17. Their median duration was 15 days and their median area 8,989 ha; 41 % went past 10,000 ha. Only 4 of its 17 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 10 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.9 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 24,681 → 24,162 ha.
  2. Start date: 29 August 2024 → 27 August 2024.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 29 August 2024 to 9 October 2024. 1,314 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.