Skip to content
worldfires
BR · Brazil · –

Barão de Melgaço fire, 17 August 2020 Nossa Senhora do Livramento, Barão de Melgaço, Santo Antônio do Leverger

Out · last detection 10 Oct 2020, 16:48 UTC

The fire started on 17 August 2020 in Barão de Melgaço, Brazil, and satellites saw it burning for 55 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 142,782 hectares from heat detections, spread across 4 municipalities.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

Other fire pages in the same area and on the same dates:

It is the 6th largest in Mato Grosso since 2016 (of 1872 with a page). Number 4 in Brazil in 2020, of 957.

Burnt area
142,782ha
GWIS perimeter (Copernicus)
Duration
55days
17 Aug 2020 – 10 Oct 2020
Municipalities hit
4
municipalities
Started on
17 Aug
2020
Heat detections
8,826
in a single hotspot: 411 MW
Danger at start
53
Extreme · FWI index
Average daily power
3.3GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 17 Aug10 Oct
10 Oct 2020

How it evolved, day by day

17 Aug 2020 · 1,860 MW · 80 18 Aug 2020 · 1,252 MW · 74 19 Aug 2020 · 2,938 MW · 174 20 Aug 2020 · 35 MW · 26 23 Aug 2020 · 96 MW · 6 24 Aug 2020 · 334 MW · 25 25 Aug 2020 · 60 MW · 6 26 Aug 2020 · 286 MW · 41 27 Aug 2020 · 1,068 MW · 76 28 Aug 2020 · 3,926 MW · 173 29 Aug 2020 · 9,378 MW · 397 30 Aug 2020 · 3,149 MW · 351 31 Aug 2020 · 7,102 MW · 417 1 Sept 2020 · 1,818 MW · 278 2 Sept 2020 · 2,157 MW · 137 3 Sept 2020 · 1,744 MW · 196 4 Sept 2020 · 4,995 MW · 314 5 Sept 2020 · 7,704 MW · 503 6 Sept 2020 · 9,631 MW · 678 7 Sept 2020 · 681 MW · 85 8 Sept 2020 · 571 MW · 57 9 Sept 2020 · 19,075 MW · 380 10 Sept 2020 · 3,504 MW · 251 11 Sept 2020 · 16,740 MW · 688 12 Sept 2020 · 30,821 MW · 1269 13 Sept 2020 · 17,496 MW · 789 14 Sept 2020 · 3,558 MW · 229 15 Sept 2020 · 1,262 MW · 137 16 Sept 2020 · 5,038 MW · 154 17 Sept 2020 · 2,777 MW · 171 18 Sept 2020 · 50 MW · 17 19 Sept 2020 · 69 MW · 10 21 Sept 2020 · 68 MW · 10 23 Sept 2020 · 275 MW · 36 24 Sept 2020 · 792 MW · 38 25 Sept 2020 · 1,781 MW · 110 26 Sept 2020 · 76 MW · 19 27 Sept 2020 · 136 MW · 14 28 Sept 2020 · 105 MW · 9 29 Sept 2020 · 67 MW · 6 30 Sept 2020 · 2,041 MW · 61 1 Oct 2020 · 673 MW · 57 2 Oct 2020 · 35 MW · 8 3 Oct 2020 · 181 MW · 18 4 Oct 2020 · 75 MW · 12 5 Oct 2020 · 16 MW · 2 6 Oct 2020 · 159 MW · 16 7 Oct 2020 · 692 MW · 92 8 Oct 2020 · 2,018 MW · 107 9 Oct 2020 · 250 MW · 19 10 Oct 2020 · 36 MW · 3
17 Aug 30 Aug 12 Sept 23 Sept 4 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

42°high
49km/h · peak gust
7%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 1.7 mm on 13 Oct.

This area had burned before

36% of the perimeter overlaps earlier fires recorded since 2016: 1,966 ha in 2016, 36,981 ha in 2017, 13,685 ha in 2018, 21,335 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 51,163 ha that had burned before.

How big is it?

10 km
It burned almost the same area as London (1,428 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. 60,712 ha reached on 19 Aug
    11 %
  2. Barão de Melgaço 15,246 inhabitants where it started
    56,875 ha reached on 17 Aug
    5.0 %
  3. Santo Antônio do Leverger 650,877 inhabitants
    22,748 ha reached on 17 Aug
    2.4 %
  4. Poconé 31,217 inhabitants
    4,962 ha reached on 19 Aug
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area12 ha
Residents≈ 1,200

Inside the perimeter there were about 12 hectares of built-up land and about 1,200 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 46 % of the area in Brazil 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
17 Aug 37.5 °C 26 % 32 km/h 0.0 mm Extreme 53
18 Aug 39.2 °C 21 % 42 km/h 0.0 mm Extreme 65
19 Aug 39.5 °C 20 % 40 km/h 0.0 mm Very extreme 70
20 Aug 28.6 °C 45 % 48 km/h 0.0 mm Very high 48
21 Aug 20.8 °C 49 % 44 km/h 0.0 mm High 35
22 Aug 24.9 °C 39 % 31 km/h 0.0 mm High 27
23 Aug 31.1 °C 36 % 22 km/h 0.0 mm High 27
24 Aug 37.4 °C 22 % 20 km/h 0.0 mm Very high 40
25 Aug 37.8 °C 24 % 31 km/h 0.0 mm Extreme 51
26 Aug 38.2 °C 25 % 33 km/h 0.0 mm Extreme 51
27 Aug 38.4 °C 21 % 30 km/h 0.0 mm Very high 47
28 Aug 39.9 °C 9 % 32 km/h 0.0 mm Extreme 58
29 Aug 39.9 °C 7 % 36 km/h 0.0 mm Very extreme 70
30 Aug 40.0 °C 10 % 35 km/h 0.0 mm Extreme 62
31 Aug 40.1 °C 18 % 31 km/h 0.0 mm Extreme 62
1 Sept 36.8 °C 22 % 24 km/h 0.0 mm Very high 49
2 Sept 36.1 °C 19 % 28 km/h 0.0 mm Very high 46
3 Sept 36.7 °C 20 % 28 km/h 0.0 mm Very high 48
4 Sept 39.1 °C 19 % 29 km/h 0.0 mm Extreme 51
5 Sept 39.4 °C 16 % 29 km/h 0.0 mm Extreme 58
6 Sept 39.5 °C 8 % 32 km/h 0.0 mm Extreme 58
7 Sept 39.3 °C 8 % 33 km/h 0.0 mm Extreme 58
8 Sept 37.9 °C 24 % 24 km/h 0.0 mm Very high 47
9 Sept 40.3 °C 11 % 30 km/h 0.0 mm Extreme 56
10 Sept 40.9 °C 8 % 30 km/h 0.0 mm Extreme 55
11 Sept 40.8 °C 13 % 40 km/h 0.0 mm Extreme 68
12 Sept 40.9 °C 14 % 32 km/h 0.0 mm Extreme 64
13 Sept 41.3 °C 9 % 36 km/h 0.0 mm Extreme 69
14 Sept 39.9 °C 9 % 28 km/h 0.0 mm Extreme 56
15 Sept 37.2 °C 19 % 30 km/h 0.0 mm Extreme 51
16 Sept 39.3 °C 12 % 31 km/h 0.0 mm Extreme 56
17 Sept 39.2 °C 17 % 31 km/h 0.0 mm Extreme 63
18 Sept 39.1 °C 20 % 26 km/h 0.0 mm Extreme 57
19 Sept 39.9 °C 21 % 27 km/h 0.0 mm Extreme 52
20 Sept 34.0 °C 33 % 35 km/h 0.0 mm Very high 50
21 Sept 34.6 °C 34 % 35 km/h 0.0 mm Very high 41
22 Sept 32.8 °C 41 % 34 km/h 0.0 mm High 33
23 Sept 36.3 °C 36 % 24 km/h 0.1 mm High 27
24 Sept 39.5 °C 21 % 20 km/h 0.0 mm Very high 42
25 Sept 41.6 °C 9 % 28 km/h 0.0 mm Extreme 52
26 Sept 39.0 °C 30 % 49 km/h 0.0 mm Extreme 66
27 Sept 39.1 °C 24 % 42 km/h 0.0 mm Extreme 60
28 Sept 39.5 °C 27 % 26 km/h 0.0 mm Very high 44
29 Sept 41.8 °C 9 % 31 km/h 0.0 mm Very high 50
30 Sept 42.5 °C 10 % 28 km/h 0.0 mm Extreme 58
1 Oct 41.9 °C 17 % 32 km/h 0.0 mm Extreme 57
2 Oct 39.1 °C 25 % 30 km/h 0.0 mm Extreme 51
3 Oct 42.0 °C 13 % 24 km/h 0.0 mm Very high 50
4 Oct 41.8 °C 13 % 24 km/h 0.0 mm Very high 47
5 Oct 41.7 °C 16 % 23 km/h 0.1 mm Extreme 50
6 Oct 41.3 °C 20 % 30 km/h 0.0 mm Extreme 64
7 Oct 41.0 °C 20 % 28 km/h 0.0 mm Extreme 52
8 Oct 42.0 °C 15 % 30 km/h 0.0 mm Extreme 53
9 Oct 42.3 °C 19 % 34 km/h 0.0 mm Extreme 60
10 Oct 40.2 °C 25 % 37 km/h 0.0 mm Extreme 66
11 Oct after 33.7 °C 43 % 41 km/h 0.1 mm Very high 40
12 Oct after 33.8 °C 45 % 21 km/h 0.0 mm High 27
13 Oct after 38.3 °C 32 % 27 km/h 1.7 mm High 37

Its twins: fires that started in the same weather

It started with an FWI of 53.2, a minimum humidity of 26% and more than two months without rain. Fires in the area that started in weather like this since 2016: 26.

FWI at the start 53.2
Minimum humidity 26 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Cuiabá fire, August 2019
16,469 ha 13 days FWI 52.5 Min. humidity 27 % 85 km away, in 2019

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

12 days
median duration
6,290 ha
median area
31 %
went past 10,000 ha
2.0 mm
rain at the end (median; 10 of 26 had it)

It was 22.7 times larger than the median of its twins and lasted 55 days, against 12 days.

None of its 26 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 16 of 26, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.7 mmfirst rain
13 Oct3 days after it ended
49km/h · max. gust

It was considered over on 10 Oct, and on 13 Oct 1.7 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 10 of 26, with a median of 2.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 10 Aug 2020
After · 17 Oct 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 8,826Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Barão de Melgaço fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 17 August 2020 to 10 October 2020 (55 days). The perimeter dates it from 24 August 2020 to 9 October 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 142,782 hectares (1,427.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 4 municipalities: Nossa Senhora do Livramento (60,712 ha, 11 %); Barão de Melgaço (56,875 ha, 5.0 %); Santo Antônio do Leverger (22,748 ha, 2.4 %); Poconé (4,962 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 42.5 °C, humidity dropped to 7 % and gusts hit 49 km/h. The fire danger index (FWI) reached 70, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 26. Their median duration was 12 days and their median area 6,290 ha; 31 % went past 10,000 ha. None of its 26 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 16 of 26, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 9 October 2020 → 10 October 2020.
  2. Start date: 24 August 2020 → 17 August 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 6 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 24 August 2020 to 9 October 2020. 8,826 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.