Skip to content
worldfires
BR · Brazil · –

Pilão Arcado fire, September 2026 Pilão Arcado, Campo Alegre de Lourdes

Out · last detection 13 Sept 2026, 17:28 UTC

The fire started on 7 September 2026 in Pilão Arcado, Brazil, and satellites saw it burning for 8 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 19,822 hectares from heat detections, spread across 2 municipalities.

Number 38 in Brazil in 2026, of 805.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
19,822ha
GWIS perimeter (Copernicus)
Duration
8days
7 Sept 2026 – 14 Sept 2026
Municipalities hit
2
municipalities
Started on
7 Sept
2026
Heat detections
828
in a single hotspot: 256 MW
Danger at start
53
Extreme · FWI index
Average daily power
2.7GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 7 Sept14 Sept
13 Sept 2026

How it evolved, day by day

7 Sept 2026 · 5,040 MW · 193 8 Sept 2026 · 2,805 MW · 248 9 Sept 2026 · 3,994 MW · 164 10 Sept 2026 · 3,246 MW · 132 11 Sept 2026 · 2,470 MW · 56 12 Sept 2026 · 736 MW · 24 13 Sept 2026 · 295 MW · 11
7 Sept 9 Sept 11 Sept 13 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (17 passes) and with what wind. Watch the film

The weather it burned in

37°high
44km/h · peak gust
21%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

58% of the perimeter overlaps earlier fires recorded since 2016: 5,772 ha in 2021, 5,012 ha in 2022, 991 ha in 2023, 945 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 11,433 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 13% of the area of London (198 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Pilão Arcado 35,357 inhabitants where it started
    19,818 ha reached on 7 Sept
    1.7 %
  2. Campo Alegre de Lourdes 30,671 inhabitants
    116 ha reached on 13 Sept
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area1.6 ha
Residents≈ 200

Inside the perimeter there were about 1.6 hectares of built-up land and about 200 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 46 % of the area in Brazil 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
7 Sept 37.1 °C 22 % 38 km/h 0.0 mm Extreme 53
8 Sept 34.9 °C 27 % 44 km/h 0.0 mm Extreme 56
9 Sept 35.0 °C 21 % 43 km/h 0.0 mm Extreme 59
10 Sept 34.2 °C 21 % 41 km/h 0.0 mm Extreme 56
11 Sept 34.5 °C 24 % 40 km/h 0.0 mm Extreme 55
12 Sept 35.8 °C 26 % 37 km/h 0.0 mm Very high 48
13 Sept 36.8 °C 24 % 38 km/h 0.0 mm Very high 49
14 Sept 36.6 °C 21 % 44 km/h 0.0 mm Extreme 56
15 Sept after 37.1 °C 18 % 41 km/h 0.0 mm Extreme 53
16 Sept after 38.2 °C 11 % 36 km/h 0.0 mm Extreme 65
17 Sept after 34.8 °C 17 % 46 km/h 0.0 mm Very extreme 74
18 Sept after 34.3 °C 26 % 48 km/h 0.0 mm Extreme 62
19 Sept after 35.0 °C 22 % 51 km/h 0.0 mm Extreme 68
20 Sept after 33.0 °C 31 % 46 km/h 0.0 mm Extreme 56
21 Sept after 35.9 °C 21 % 39 km/h 0.0 mm Extreme 50
22 Sept after 37.6 °C 20 % 40 km/h 0.0 mm Very high 49
23 Sept after 38.6 °C 19 % 30 km/h 0.0 mm Very high 48
24 Sept after 37.5 °C 25 % 38 km/h 0.0 mm Extreme 63

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 31 Aug 2026
After · 21 Sept 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 11 September 2026 the air beside the fire reached 44 µg/m³ of PM2.5. That day averaged 22: 1.5 times the WHO daily guideline (15).

PM2.5 peak44 µg/m³
Days over the guideline3 days
PM1045 µg/m³
Optical depth0.64
5 Sept8 Sept11 Sept14 Sept17 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 828Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Pilão Arcado fire last?
GWIS (Copernicus) dates it between 7 September 2026 and 14 September 2026: 8 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 19,822 hectares (198.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Pilão Arcado (19,818 ha, 1.7 %); Campo Alegre de Lourdes (116 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 37.1 °C, humidity dropped to 21 % and gusts hit 44 km/h. The fire danger index (FWI) reached 59, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 828 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.