Skip to content
worldfires
BR · Brazil · –

Pilão Arcado fire, 26 September 2025 Pilão Arcado, Morro Cabeça no Tempo

Out · last detection 10 Oct 2025, 16:15 UTC

The fire started on 26 September 2025 in Pilão Arcado, Brazil, and satellites saw it burning for 15 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 18,758 hectares from heat detections, spread across 2 municipalities.

It is the 30th largest in Bahia since 2016 (of 386 with a page). Number 33 in Brazil in 2025, of 526.

Burnt area
18,758ha
GWIS perimeter (Copernicus)
Duration
15days
26 Sept 2025 – 10 Oct 2025
Municipalities hit
2
municipalities
Started on
26 Sept
2025
Heat detections
987
in a single hotspot: 367 MW
Danger at start
61
Extreme · FWI index
Average daily power
1.9GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 26 Sept10 Oct
10 Oct 2025

How it evolved, day by day

26 Sept 2025 · 141 MW · 8 27 Sept 2025 · 2,528 MW · 68 28 Sept 2025 · 2,480 MW · 48 29 Sept 2025 · 230 MW · 16 30 Sept 2025 · 795 MW · 18 1 Oct 2025 · 11,751 MW · 250 2 Oct 2025 · 5,389 MW · 254 3 Oct 2025 · 3,568 MW · 194 4 Oct 2025 · 1,409 MW · 86 5 Oct 2025 · 378 MW · 24 6 Oct 2025 · 11 MW · 4 7 Oct 2025 · 43 MW · 9 8 Oct 2025 · 10 MW · 2 9 Oct 2025 · 4 MW · 3 10 Oct 2025 · 52 MW · 3
26 Sept 1 Oct 5 Oct 8 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
52km/h · peak gust
15%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 26.7 mm on 20 Oct.

This area had burned before

81% of the perimeter overlaps earlier fires recorded since 2016: 1,031 ha in 2017, 664 ha in 2018, 45 ha in 2019, 12,522 ha in 2021, 2,607 ha in 2022, 762 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 15,123 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 12% of the area of London (188 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Pilão Arcado 35,357 inhabitants where it started
    10,447 ha reached on 26 Sept
    0.9 %
  2. Morro Cabeça no Tempo 4,377 inhabitants
    8,433 ha reached on 1 Oct
    3.8 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.22 ha
Residents≈ 30

Inside the perimeter there were about 0.22 hectares of built-up land and about 30 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 46 % of the area in Brazil 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
26 Sept 35.1 °C 21 % 49 km/h 0.0 mm Extreme 61
27 Sept 34.7 °C 21 % 52 km/h 0.0 mm Extreme 65
28 Sept 34.1 °C 23 % 45 km/h 0.0 mm Extreme 57
29 Sept 35.2 °C 21 % 45 km/h 0.0 mm Extreme 56
30 Sept 35.2 °C 21 % 48 km/h 0.0 mm Extreme 58
1 Oct 35.8 °C 15 % 47 km/h 0.0 mm Extreme 58
2 Oct 36.4 °C 17 % 48 km/h 0.0 mm Extreme 56
3 Oct 35.2 °C 20 % 51 km/h 0.0 mm Extreme 62
4 Oct 34.2 °C 20 % 50 km/h 0.0 mm Extreme 64
5 Oct 35.5 °C 20 % 48 km/h 0.0 mm Extreme 63
6 Oct 36.6 °C 20 % 47 km/h 0.0 mm Extreme 56
7 Oct 36.3 °C 21 % 46 km/h 0.0 mm Extreme 50
8 Oct 37.5 °C 19 % 42 km/h 0.0 mm Extreme 55
9 Oct 36.4 °C 20 % 44 km/h 0.0 mm Extreme 61
10 Oct 36.3 °C 22 % 48 km/h 0.0 mm Extreme 61
11 Oct after 36.0 °C 21 % 48 km/h 0.0 mm Extreme 59
12 Oct after 37.1 °C 22 % 44 km/h 0.0 mm Extreme 58
13 Oct after 36.3 °C 25 % 43 km/h 0.0 mm Extreme 60
14 Oct after 35.7 °C 21 % 46 km/h 0.0 mm Extreme 57
15 Oct after 37.1 °C 18 % 48 km/h 0.0 mm Extreme 66
16 Oct after 37.1 °C 16 % 46 km/h 0.0 mm Extreme 68
17 Oct after 36.7 °C 20 % 44 km/h 0.0 mm Extreme 60
18 Oct after 36.4 °C 22 % 44 km/h 0.0 mm Extreme 54
19 Oct after 36.2 °C 27 % 38 km/h 0.0 mm Extreme 56
20 Oct after 27.8 °C 55 % 29 km/h 26.7 mm Low 6

Its twins: fires that started in the same weather

It started with an FWI of 60.8, a minimum humidity of 21% and more than two months without rain. Fires in the area that started in weather like this since 2016: 39.

FWI at the start 60.8
Minimum humidity 21 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Campo Alegre de Lourdes fire, September 2021
21,744 ha 41 days FWI 61.4 Min. humidity 22 % 63 km away, in 2021

First rain (1 mm or more) after it ended: 2.9 mm on 21 Oct.

What happened to them

12 days
median duration
5,675 ha
median area
26 %
went past 10,000 ha
1.8 mm
rain at the end (median; 16 of 39 had it)

It was 3.3 times larger than the median of its twins and lasted 15 days, against 12 days.

Only 3 of its 39 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 23 of 39, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

26.7 mmfirst rain
20 Oct10 days after it ended
52km/h · max. gust

It was considered over on 10 Oct, and on 20 Oct 26.7 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 16 of 39, with a median of 1.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 19 Sept 2025
After · 17 Oct 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 3 October 2025 the air beside the fire reached 52 µg/m³ of PM2.5. That day averaged 21: 1.4 times the WHO daily guideline (15).

PM2.5 peak52 µg/m³
Days over the guideline1 day
PM1052 µg/m³
Optical depth0.70
24 Sept28 Sept2 Oct6 Oct10 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 987Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Pilão Arcado fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 26 September 2025 to 10 October 2025 (15 days). The perimeter dates it from 26 September 2025 to 7 October 2025.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 18,758 hectares (187.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Pilão Arcado (10,447 ha, 0.9 %); Morro Cabeça no Tempo (8,433 ha, 3.8 %).
What was the weather like?
During the fire the temperature reached 37.5 °C, humidity dropped to 15 % and gusts hit 52 km/h. The fire danger index (FWI) reached 65, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 39. Their median duration was 12 days and their median area 5,675 ha; 26 % went past 10,000 ha. Only 3 of its 39 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 23 of 39, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 7 October 2025 → 10 October 2025.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 26 September 2025 to 7 October 2025. 987 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.