Skip to content
worldfires
BR · Brazil · –

Pilão Arcado fire, August 2021 Pilão Arcado, Campo Alegre de Lourdes

Out · last detection 22 Aug 2021, 16:25 UTC

The fire started on 1 August 2021 in Pilão Arcado, Brazil, and satellites saw it burning for 22 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 12,107 hectares from heat detections, spread across 2 municipalities.

It is the 55th largest in Bahia since 2016 (of 386 with a page). Number 124 in Brazil in 2021, of 814.

Burnt area
12,107ha
GWIS perimeter (Copernicus)
Duration
22days
1 Aug 2021 – 22 Aug 2021
Municipalities hit
2
municipalities
Started on
1 Aug
2021
Heat detections
813
in a single hotspot: 304 MW
Danger at start
49
Very high · FWI index
Average daily power
617MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 1 Aug22 Aug
22 Aug 2021

How it evolved, day by day

1 Aug 2021 · 158 MW · 5 2 Aug 2021 · 74 MW · 16 4 Aug 2021 · 549 MW · 12 5 Aug 2021 · 2,039 MW · 86 6 Aug 2021 · 1,527 MW · 103 7 Aug 2021 · 873 MW · 48 8 Aug 2021 · 71 MW · 18 9 Aug 2021 · 982 MW · 67 10 Aug 2021 · 635 MW · 63 11 Aug 2021 · 1,058 MW · 51 12 Aug 2021 · 617 MW · 51 13 Aug 2021 · 342 MW · 28 14 Aug 2021 · 1,551 MW · 70 15 Aug 2021 · 534 MW · 45 16 Aug 2021 · 699 MW · 51 17 Aug 2021 · 1,034 MW · 58 18 Aug 2021 · 164 MW · 25 19 Aug 2021 · 30 MW · 9 20 Aug 2021 · 3 MW · 3 21 Aug 2021 · 11 MW · 2 22 Aug 2021 · 4 MW · 2
5 Aug 12 Aug 17 Aug 22 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
53km/h · peak gust
23%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 7.6% of the area of London (121 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Pilão Arcado 35,357 inhabitants where it started
    11,470 ha reached on 1 Aug
    1.0 %
  2. Campo Alegre de Lourdes 30,671 inhabitants
    706 ha reached on 17 Aug
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.20 ha
Residents≈ 20

Inside the perimeter there were about 0.20 hectares of built-up land and about 20 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Strong wind: 3.1 % of the area in Brazil 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
1 Aug 30.5 °C 33 % 53 km/h 0.0 mm Very high 49
2 Aug 29.0 °C 39 % 49 km/h 0.0 mm Very high 50
3 Aug 31.3 °C 31 % 40 km/h 0.0 mm Very high 40
4 Aug 31.0 °C 29 % 40 km/h 0.0 mm Very high 43
5 Aug 30.9 °C 32 % 42 km/h 0.0 mm Very high 44
6 Aug 30.1 °C 38 % 53 km/h 0.0 mm Extreme 52
7 Aug 29.8 °C 35 % 53 km/h 0.0 mm Very high 50
8 Aug 29.3 °C 37 % 50 km/h 0.0 mm Very high 44
9 Aug 31.6 °C 28 % 43 km/h 0.0 mm Very high 49
10 Aug 32.6 °C 31 % 37 km/h 0.0 mm Very high 46
11 Aug 33.3 °C 29 % 36 km/h 0.0 mm Very high 44
12 Aug 33.7 °C 28 % 36 km/h 0.0 mm Very high 46
13 Aug 31.8 °C 34 % 42 km/h 0.0 mm Very high 47
14 Aug 32.0 °C 28 % 38 km/h 0.0 mm Very high 44
15 Aug 31.7 °C 30 % 38 km/h 0.0 mm Very high 44
16 Aug 32.4 °C 23 % 37 km/h 0.0 mm Extreme 50
17 Aug 32.4 °C 23 % 39 km/h 0.0 mm Extreme 52
18 Aug 31.1 °C 31 % 45 km/h 0.0 mm Extreme 56
19 Aug 30.4 °C 31 % 53 km/h 0.0 mm Extreme 59
20 Aug 31.8 °C 33 % 42 km/h 0.0 mm Extreme 51
21 Aug 32.6 °C 28 % 42 km/h 0.0 mm Extreme 52
22 Aug 32.6 °C 29 % 43 km/h 0.0 mm Extreme 54
23 Aug after 33.6 °C 31 % 42 km/h 0.0 mm Very high 50
24 Aug after 33.4 °C 31 % 39 km/h 0.0 mm Very high 47
25 Aug after 33.7 °C 30 % 39 km/h 0.0 mm Very high 47
26 Aug after 34.9 °C 27 % 41 km/h 0.0 mm Extreme 51
27 Aug after 34.6 °C 27 % 38 km/h 0.0 mm Very high 45
28 Aug after 33.8 °C 34 % 42 km/h 0.0 mm Extreme 51
29 Aug after 34.0 °C 33 % 43 km/h 0.0 mm Very high 50
30 Aug after 33.8 °C 33 % 40 km/h 0.0 mm Very high 46
31 Aug after 33.1 °C 32 % 41 km/h 0.0 mm Very high 48
1 Sept after 32.0 °C 34 % 45 km/h 0.3 mm Very high 46

Its twins: fires that started in the same weather

It started with an FWI of 48.9, a minimum humidity of 33% and more than two months without rain. Fires in the area that started in weather like this since 2016: 20.

FWI at the start 48.9
Minimum humidity 33 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Morro Cabeça no Tempo fire, October 2019
4,286 ha 13 days FWI 49.0 Min. humidity 31 % 47 km away, in 2019

First rain (1 mm or more) after it ended: 8.1 mm on 21 Oct.

What happened to them

19 days
median duration
5,502 ha
median area
35 %
went past 10,000 ha
8.6 mm
rain at the end (median; 9 of 20 had it)

It was 2.2 times larger than the median of its twins and lasted 22 days, against 19 days.

Only 6 of its 20 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 11 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 8.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
53km/h · max. gust

It was considered over on 22 Aug, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 9 of 20, with a median of 8.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 25 Jul 2021
After · 29 Aug 2021

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 813Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Pilão Arcado fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 1 August 2021 to 22 August 2021 (22 days). The perimeter dates it from 1 August 2021 to 20 August 2021.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 12,107 hectares (121.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Pilão Arcado (11,470 ha, 1.0 %); Campo Alegre de Lourdes (706 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 33.7 °C, humidity dropped to 23 % and gusts hit 53 km/h. The fire danger index (FWI) reached 59, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 20. Their median duration was 19 days and their median area 5,502 ha; 35 % went past 10,000 ha. Only 6 of its 20 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 11 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 8.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 20 August 2021 → 22 August 2021.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 1 August 2021 to 20 August 2021. 813 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.