Carrazeda de Ansiães fire, July 2022
Lavandeira, Beira Grande e Selores, Linhares, Marzagão
Out · last detection
The fire started on in Linhares, Portugal, and satellites saw it burning for 6 days. Copernicus mapped a burnt perimeter of 3,389 hectares from satellite imagery, spread across 4 freguesias. According to ICNF, the largest of the 2 recorded fires was detected on 7 July 2022 at 15:54 and declared extinguished on 11 July 2022.
Also known as: Linhares fire, July 2022.
It is number 2 by size of the 10 fires with a page that started in Carrazeda de Ansiães since 2016. Number 6 in Portugal in 2022, of 107.
This is an index computed from weather model data, not a measurement of the fire nor an official warning. Danger warnings are issued by each country’s authority. Emergency number and official warnings ›
Weather during the fire
model
38.4°C · 11% RH
High of 38.4 °C and minimum humidity of 11% on 12 July 2022; gusts of 36 km/h on 7 July 2022.
These are model values for a cell of about 25 km, not from a weather station: they may differ from what was measured on the ground.
ⓘThis page’s change log has been kept since 24 October 2026: every night what it publishes is compared and the difference is logged. Anything earlier is reconstructed from each source’s date and marked as reconstructed.
Show
· reconstructedofficial
Matched with the official ICNF record
Matches: 3,316 ha in the official record (records: 2).
A version keeps the area, dates, name and official record; the area as it was logged (changes under 2% are not logged). The map, hotspots and weather always show today’s data.
Citation
A lede of about 60 words figures only, no adjectives
Burnt area inside each freguesia, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
What burned
Scrub and transitional woodland48 %
Agricultural areas21 %
Other natural land11 %
Sclerophyllous scrub11 %
Mixed forest4.4 %
Broadleaved forest4.2 %
Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.
People and buildings inside the perimeter
GHSL 2020
Built-up area0.65ha
Residents< 20
Inside the perimeter there were about 0.65 hectares of built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
According to ICNF, 2 fires started inside this perimeter on these dates, totalling 3,316 ha (the satellite measured 3,389 ha).
ICNF records each fire that started at a different time or place separately; the satellite sees a single burned area, so this page groups them together. The numbers on the map show where each one started.
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
Day
High
Min. humidity
Peak gust
Rain
Danger (FWI)
7 Jul
30.5 °C
18 %
36 km/h
0.0 mm
High 27
8 Jul
32.7 °C
17 %
30 km/h
0.0 mm
High 29
9 Jul
34.6 °C
13 %
25 km/h
0.0 mm
High 28
10 Jul
35.7 °C
17 %
21 km/h
0.0 mm
High 28
11 Jul
35.4 °C
19 %
21 km/h
0.0 mm
High 27
12 Jul
38.4 °C
11 %
28 km/h
0.0 mm
High 34
13 Jul after
38.3 °C
15 %
26 km/h
0.0 mm
High 37
14 Jul after
40.5 °C
13 %
35 km/h
0.0 mm
Very high 45
15 Jul after
36.7 °C
22 %
35 km/h
0.1 mm
Very high 48
16 Jul after
35.5 °C
22 %
23 km/h
0.6 mm
Very high 42
17 Jul after
36.8 °C
21 %
40 km/h
0.2 mm
Very high 44
18 Jul after
32.0 °C
26 %
54 km/h
0.0 mm
Extreme 53
19 Jul after
26.0 °C
40 %
37 km/h
0.0 mm
High 34
20 Jul after
31.7 °C
21 %
19 km/h
0.0 mm
High 25
21 Jul after
33.4 °C
27 %
35 km/h
0.0 mm
High 31
22 Jul after
31.7 °C
29 %
26 km/h
0.0 mm
High 29
Its twins: fires that started in the same weather
It started with an FWI of 26.9, a minimum humidity of 18% and 1 day without rain. Fires in the area that started in weather like this since 2016: 25.
FWI at the start26.9
Minimum humidity18 %
Days without rain1
this firechosen twinsrest of the area
Almost identicalSimilar
Outlines of the closest twins
This fire · Carrazeda de Ansiães fire, July 2022
3,389 ha6 daysFWI 26.9Min. humidity 18 %
Freixo de Espada à Cinta fire, July 2017
2,593 ha3 daysFWI 29.2Min. humidity 18 %50 km away, in 2017
First rain (1 mm or more) after it ended: none in the following ten days.
It was 14.1 times larger than the median of its twins and lasted 6 days, against 2 days.
Only 3 of its 25 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 9 of 25, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.0 mm.
This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it
How it ended
—first rain
—no rain in ten days
36km/h · max. gust
It was considered over on 12 Jul, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 16 of 25, with a median of 2.0 mm.
Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
How a twin is chosen
Same area: fires that have already ended, less than 250 km from this one, since 2016.
Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
They are sorted by similarity, and the outlines of the first five are drawn.
Drag the line to compare the same ground before the fire and after it.
↔
Before · 30 Jun 2022
After · 19 Jul 2022
Sentinel-2 did not pass over on that day. Try another date, or use false colour, which is daily.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · Copernicus
On 10 July 2022 the air beside the fire reached 29 µg/m³ of PM2.5. That day averaged 18: 1.2 times the WHO daily guideline (15).
PM2.5 peak29µg/m³
Days over the guideline3days
PM1041µg/m³
WHO 15
5 Jul8 Jul11 Jul14 Jul
GoodFairModeratePoorVery poorExtremely poor
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table· 217Every satellite heat detection, one by one, with time, satellite, power and coordinates.›
⬇ Download CSVTimes in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Copernicus dates it between 7 July 2022 and 12 July 2022: 6 days between the first and last image with fire. According to ICNF, the largest of the 2 recorded fires was detected on 7 July 2022 at 15:54 and declared extinguished on 11 July 2022.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 3,389 hectares (33.9 km²). Official national figures may differ.
Which freguesias burned?
The fire entered 4 freguesias: Lavandeira, Beira Grande e Selores (1,504 ha, 41 %); Linhares (1,132 ha, 40 %); Marzagão (453 ha, 28 %); Castanheiro do Norte e Ribalonga (303 ha, 15 %).
Did the fire reach a town?
The fire started in Linhares and reached its centre: the point marking it was inside the burnt area or less than 500 metres from it. That does not mean houses burned.
What was the weather like?
During the fire the temperature reached 38.4 °C, humidity dropped to 11 % and gusts hit 36 km/h. The fire danger index (FWI) reached 34, class High.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Portugal (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 25. Their median duration was 2 days and their median area 240 ha; 16 % went past 1,000 ha. Only 3 of its 25 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 9 of 25, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.0 mm.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
⚑Report an errorHow we know this›
Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
Dates from the perimeter: the VIIRS detections inside it did not change them. 217 Suomi-NPP VIIRS detections on those dates.
Compared with ICNF: 3,316 official ha against 3,389 ha of perimeter; they agree within 25%.
Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Freguesia boundaries come from geoBoundaries ADM3 (CC0 1.0 Universal (CC0 1.0) Public Domain Dedication). The area per freguesia is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.