Freixo de Espada à Cinta fire, August 2017
Ligares, Poiares, Freixo de Espada à Cinta e Mazouco
Out · last detection 27 Aug 2017, 13:16 UTC
The fire started on 26 August 2017 in Ligares, Portugal, and satellites saw it burning for 2 days. Copernicus mapped a burnt perimeter of 5,710 hectares from satellite imagery, spread across 5 freguesias. According to ICNF, the largest of the 3 recorded fires was detected on 26 August 2017 at 17:36 and declared extinguished on 29 August 2017.
This is an index computed from weather model data, not a measurement of the fire nor an official warning. Danger warnings are issued by each country’s authority. Emergency number and official warnings ›
Weather during the fire
model
32.6°C · 25% RH
High of 32.6 °C and minimum humidity of 25% on 26 August 2017; gusts of 48 km/h on 27 August 2017.
These are model values for a cell of about 25 km, not from a weather station: they may differ from what was measured on the ground.
Living inside
model
≈ 150people
Estimated residents inside the perimeter and 2.8 ha of built-up area (100 m grid, epoch 2015).
Source
GHSL R2023A · JRC
Date
calculated on 24 October 2026
+− cross-check
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
ⓘThis page’s change log has been kept since 24 October 2026: every night what it publishes is compared and the difference is logged. Anything earlier is reconstructed from each source’s date and marked as reconstructed.
Show
· reconstructedofficial
Matched with the official ICNF record
Matches: 6,265 ha in the official record (records: 3).
A version keeps the area, dates, name and official record; the area as it was logged (changes under 2% are not logged). The map, hotspots and weather always show today’s data.
Citation
A lede of about 60 words figures only, no adjectives
Burnt area inside each freguesia, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
What burned
Sclerophyllous scrub50 %
Agricultural areas24 %
Scrub and transitional woodland19 %
Other natural land4.8 %
Broadleaved forest2.5 %
Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.
People and buildings inside the perimeter
GHSL 2015
Built-up area2.8ha
Residents≈ 150
Inside the perimeter there were about 2.8 hectares of built-up land and about 150 residents (GHSL 2015, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
According to ICNF, 3 fires started inside this perimeter on these dates, totalling 6,265 ha (the satellite measured 5,710 ha).
ICNF records each fire that started at a different time or place separately; the satellite sees a single burned area, so this page groups them together. The numbers on the map show where each one started.
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
Day
High
Min. humidity
Peak gust
Rain
Danger (FWI)
26 Aug
32.6 °C
25 %
46 km/h
1.4 mm
Very high 42
27 Aug
28.4 °C
46 %
48 km/h
9.4 mm
Moderate 14
28 Aug after
26.1 °C
46 %
31 km/h
3.6 mm
Very low 3
Its twins: fires that started in the same weather
It started with an FWI of 42.3, a minimum humidity of 25% and 49 days without rain. Fires in the area that started in weather like this since 2016: 24.
FWI at the start42.3
Minimum humidity25 %
Days without rain49
this firechosen twinsrest of the area
Almost identicalSimilar
Outlines of the closest twins
This fire · Freixo de Espada à Cinta fire, August 2017
5,710 ha2 daysFWI 42.3Min. humidity 25 %
Sabugal fire, August 2022
331 ha2 daysFWI 40.0Min. humidity 26 %90 km away, in 2022
First rain (1 mm or more) after it ended: none in the following ten days.
It was 13.2 times larger than the median of its twins and lasted 2 days, against 2 days.
Only 2 of its 24 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 8 of 24, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.6 mm.
This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it
How it ended
3.6 mmfirst rain
28 Augthe day after it ended
48km/h · max. gust
It was considered over on 27 Aug, and on 28 Aug 3.6 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 16 of 24, with a median of 2.6 mm.
Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
How a twin is chosen
Same area: fires that have already ended, less than 250 km from this one, since 2016.
Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
They are sorted by similarity, and the outlines of the first five are drawn.
Drag the line to compare the same ground before the fire and after it.
↔
Before · 19 Aug 2017
After · 3 Sept 2017
Sentinel-2 did not pass over on that day. Try another date, or use false colour, which is daily.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · Copernicus
On 27 August 2017 the air beside the fire reached 37 µg/m³ of PM2.5. That day averaged 22: 1.5 times the WHO daily guideline (15).
PM2.5 peak37µg/m³
Days over the guideline2days
PM1046µg/m³
WHO 15
24 Aug26 Aug28 Aug30 Aug
GoodFairModeratePoorVery poorExtremely poor
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table· 45Every satellite heat detection, one by one, with time, satellite, power and coordinates.›
⬇ Download CSVTimes in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
How long did the Freixo de Espada à Cinta fire last?
Copernicus dates it between 26 August 2017 and 27 August 2017: 2 days between the first and last image with fire. According to ICNF, the largest of the 3 recorded fires was detected on 26 August 2017 at 17:36 and declared extinguished on 29 August 2017.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 5,710 hectares (57.1 km²). Official national figures may differ.
Which freguesias burned?
The fire entered 5 freguesias: Ligares (2,226 ha, 49 %); Poiares (1,901 ha, 47 %); Freixo de Espada à Cinta e Mazouco (1,038 ha, 11 %); Mós (548 ha, 9.3 %); Urros e Peredo dos Castelhanos (2 ha, 0.0 %).
Did the fire reach a town?
The fire started in Ligares and reached its centre: the point marking it was inside the burnt area or less than 500 metres from it. That does not mean houses burned.
What was the weather like?
During the fire the temperature reached 32.6 °C, humidity dropped to 25 % and gusts hit 48 km/h. The fire danger index (FWI) reached 42, class Very high.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Portugal (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 24. Their median duration was 2 days and their median area 434 ha; 25 % went past 1,000 ha. Only 2 of its 24 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 8 of 24, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.6 mm.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
⚑Report an errorHow we know this›
Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
Dates from the perimeter: the VIIRS detections inside it did not change them. 45 Suomi-NPP VIIRS detections on those dates.
Compared with ICNF: 6,265 official ha against 5,710 ha of perimeter; they agree within 25%.
Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Freguesia boundaries come from geoBoundaries ADM3 (CC0 1.0 Universal (CC0 1.0) Public Domain Dedication). The area per freguesia is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.