Skip to content
worldfires
PT · Portugal · –

Carrazeda de Ansiães fire, 24 July 2017 Lavandeira, Beira Grande e Selores

Out · last detection 25 Jul 2017, 02:11 UTC

The fire started on 24 July 2017 in Lavandeira, Beira Grande e Selores, Portugal, and satellites saw it burning for 2 days. Copernicus mapped a burnt perimeter of 226 hectares from satellite imagery, spread across a single freguesia. According to ICNF, it was detected on 24 July 2017 at 00:24 and declared extinguished on 25 July 2017.

It is the 6th largest in Carrazeda de Ansiães since 2016 (of 10 with a page). Number 142 in Portugal in 2017, of 211.

The power measured by the satellite is low (10.5 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
226ha
Copernicus perimeter
Duration
2days
24 Jul 2017 – 25 Jul 2017
Freguesias hit
1
freguesias
Started on
24 Jul
2017
Heat detections
11
in a single hotspot: 11 MW
Danger at start
36
High · FWI index
Average daily power
24MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 24 Jul25 Jul
25 Jul 2017

How it evolved, day by day

24 Jul 2017 · 31 MW · 5 25 Jul 2017 · 16 MW · 6
24 Jul 25 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

29°high
41km/h · peak gust
29%lowest humidity

It had gone 17 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

What happened to each freguesia

  1. Lavandeira, Beira Grande e Selores 337 inhabitants · 1.1 km from the centre where it started
    226 ha reached on 24 Jul
    6.2 %

Burnt area inside each freguesia, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Other natural land67 %
  • Scrub and transitional woodland28 %
  • Agricultural areas5.7 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

Official record

According to ICNF, this fire started on 24 July 2017 and burned 235 ha (the satellite measured 226 ha).

ICNF (Instituto da Conservação da Natureza e das Florestas). This is the agency’s operational record: its figures may be revised when the year’s statistics are closed.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
24 Jul 28.5 °C 30 % 41 km/h 0.0 mm High 36
25 Jul 29.4 °C 29 % 31 km/h 0.0 mm High 32
26 Jul after 31.6 °C 23 % 31 km/h 0.0 mm High 32
27 Jul after 31.7 °C 28 % 39 km/h 0.0 mm High 34
28 Jul after 31.0 °C 27 % 40 km/h 0.0 mm High 34
29 Jul after 30.9 °C 30 % 45 km/h 0.0 mm High 33
30 Jul after 27.9 °C 30 % 36 km/h 0.0 mm High 35
31 Jul after 23.5 °C 42 % 33 km/h 0.2 mm High 26
1 Aug after 26.5 °C 30 % 31 km/h 0.0 mm High 29
2 Aug after 30.1 °C 17 % 32 km/h 0.0 mm High 32
3 Aug after 29.9 °C 42 % 38 km/h 0.0 mm High 32
4 Aug after 33.1 °C 33 % 34 km/h 0.0 mm High 31

Its twins: fires that started in the same weather

It started with an FWI of 35.6, a minimum humidity of 30% and 17 days without rain. Fires in the area that started in weather like this since 2016: 30.

FWI at the start 35.6
Minimum humidity 30 %
Days without rain 17
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Celorico de Basto fire, September 2020
356 ha 2 days FWI 36.3 Min. humidity 30 % 70 km away, in 2020

First rain (1 mm or more) after it ended: 3.5 mm on 14 Sept.

What happened to them

2 days
median duration
246 ha
median area
17 %
went past 1,000 ha
4.1 mm
rain at the end (median; 16 of 30 had it)

It burned an area similar to its twins (226 ha against a median of 246 ha) and lasted 2 days, against 2 days.

In 14 of 30, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.1 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
41km/h · max. gust

It was considered over on 25 Jul, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 16 of 30, with a median of 4.1 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 17 Jul 2017
After · 1 Aug 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 27 July 2017 the air beside the fire reached 8 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak8 µg/m³
Days over the guideline0 days
PM1017 µg/m³
22 Jul24 Jul26 Jul28 Jul
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 11Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Portugal

Frequently asked questions

How long did the Carrazeda de Ansiães fire last?
Copernicus dates it between 24 July 2017 and 25 July 2017: 2 days between the first and last image with fire. According to ICNF, it was detected on 24 July 2017 at 00:24 and declared extinguished on 25 July 2017.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 226 hectares (2.3 km²). Official national figures may differ.
Which freguesias burned?
The fire only entered Lavandeira, Beira Grande e Selores (226 ha, 6.2 %).
Did the fire reach a town?
The fire started in Lavandeira, Beira Grande e Selores and came within 1.1 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 29.4 °C, humidity dropped to 29 % and gusts hit 41 km/h. The fire danger index (FWI) reached 36, class High.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Portugal (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 30. Their median duration was 2 days and their median area 246 ha; 17 % went past 1,000 ha. In 14 of 30, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.1 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 11 Suomi-NPP VIIRS detections on those dates.
  • Compared with ICNF: 235 official ha against 226 ha of perimeter; they agree within 25%.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Freguesia boundaries come from geoBoundaries ADM3 (CC0 1.0 Universal (CC0 1.0) Public Domain Dedication). The area per freguesia is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.