Skip to content
worldfires
PT · Portugal · –

Celorico de Basto fire, September 2020 Rego, Borba de Montanha, Caçarilhe e Infesta

Out · last detection 8 Sept 2020, 13:41 UTC

The fire started on 7 September 2020 in Rego, Portugal, and satellites saw it burning for 2 days. Copernicus mapped a burnt perimeter of 356 hectares from satellite imagery, spread across 3 freguesias. According to ICNF, it was detected on 7 September 2020 at 21:24 and declared extinguished on 8 September 2020.

It is the 3th largest in Celorico de Basto since 2016 (of 12 with a page). Number 31 in Portugal in 2020, of 67.

Burnt area
356ha
Copernicus perimeter
Duration
2days
7 Sept 2020 – 8 Sept 2020
Freguesias hit
3
freguesias
Started on
7 Sept
2020
Heat detections
24
in a single hotspot: 40 MW
Danger at start
36
High · FWI index
Average daily power
344MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 7 Sept8 Sept

How it evolved, day by day

8 Sept 2020 · 344 MW · 24

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

26°high
52km/h · peak gust
23%lowest humidity

It had gone 17 days without rain (1 mm or more) when it started. Rain came after the fire: 3.5 mm on 14 Sept.

This area had burned before

7% of the perimeter overlaps earlier fires recorded since 2016: 26 ha in 2016.

What happened to each freguesia

  1. Rego 1,032 inhabitants · 0.7 km from the centre where it started
    314 ha reached on 8 Sept
    18 %
  2. Borba de Montanha 1,116 inhabitants · 1.1 km from the centre
    40 ha
    3.6 %
  3. Caçarilhe e Infesta 510 inhabitants · 1.5 km from the centre
    2 ha
    0.2 %

Burnt area inside each freguesia, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Coniferous forest40 %
  • Mixed forest35 %
  • Scrub and transitional woodland19 %
  • Agricultural areas4.2 %
  • Other natural land1.1 %
  • Broadleaved forest0.6 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

Official record

According to ICNF, this fire started on 7 September 2020 and burned 356 ha (the satellite measured 356 ha).

ICNF (Instituto da Conservação da Natureza e das Florestas). This is the agency’s operational record: its figures may be revised when the year’s statistics are closed.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Strong wind: 11 % of the area in Portugal

Day High Min. humidity Peak gust Rain Danger (FWI)
7 Sept 25.5 °C 30 % 50 km/h 0.0 mm High 36
8 Sept 26.3 °C 23 % 52 km/h 0.0 mm High 36
9 Sept after 28.2 °C 23 % 23 km/h 0.0 mm High 26
10 Sept after 28.3 °C 27 % 24 km/h 0.0 mm High 29
11 Sept after 29.3 °C 28 % 28 km/h 0.0 mm High 30
12 Sept after 30.9 °C 24 % 40 km/h 0.0 mm Very high 40
13 Sept after 30.6 °C 24 % 34 km/h 0.0 mm Very high 38
14 Sept after 23.2 °C 61 % 47 km/h 3.5 mm Low 9

Its twins: fires that started in the same weather

It started with an FWI of 36.3, a minimum humidity of 30% and 17 days without rain. Fires in the area that started in weather like this since 2016: 31.

FWI at the start 36.3
Minimum humidity 30 %
Days without rain 17
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Carrazeda de Ansiães fire, July 2017
226 ha 2 days FWI 35.6 Min. humidity 30 % 70 km away, in 2017

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

2 days
median duration
284 ha
median area
13 %
went past 1,000 ha
10.2 mm
rain at the end (median; 15 of 31 had it)

It burned an area similar to its twins (356 ha against a median of 284 ha) and lasted 2 days, against 2 days.

In 16 of 31, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 10.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

3.5 mmfirst rain
14 Sept6 days after it ended
52km/h · max. gust

It was considered over on 8 Sept, and on 14 Sept 3.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 15 of 31, with a median of 10.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 31 Aug 2020
After · 15 Sept 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 9 September 2020 the air beside the fire reached 20 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak20 µg/m³
Days over the guideline0 days
PM1029 µg/m³
5 Sept7 Sept9 Sept11 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 24Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Portugal

Frequently asked questions

How long did the Celorico de Basto fire last?
Copernicus dates it between 7 September 2020 and 8 September 2020: 2 days between the first and last image with fire. According to ICNF, it was detected on 7 September 2020 at 21:24 and declared extinguished on 8 September 2020.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 356 hectares (3.6 km²). Official national figures may differ.
Which freguesias burned?
The fire entered 3 freguesias: Rego (314 ha, 18 %); Borba de Montanha (40 ha, 3.6 %); Caçarilhe e Infesta (2 ha, 0.2 %).
Did the fire reach a town?
The fire started in Rego and came within 0.7 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 26.3 °C, humidity dropped to 23 % and gusts hit 52 km/h. The fire danger index (FWI) reached 36, class High.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Portugal (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 31. Their median duration was 2 days and their median area 284 ha; 13 % went past 1,000 ha. In 16 of 31, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 10.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 24 Suomi-NPP VIIRS detections on those dates.
  • Compared with ICNF: 356 official ha against 356 ha of perimeter; they agree within 25%.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Freguesia boundaries come from geoBoundaries ADM3 (CC0 1.0 Universal (CC0 1.0) Public Domain Dedication). The area per freguesia is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.