Skip to content
worldfires
BR · Brazil · –

São Desidério fire, 7 October 2022 São Desidério

Out · last detection 15 Oct 2022, 17:08 UTC

The fire started on 7 October 2022 in São Desidério, Brazil, and satellites saw it burning for 9 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 9,414 hectares from heat detections, spread across a single municipality.

It is the 83th largest in Bahia since 2016 (of 386 with a page). Number 119 in Brazil in 2022, of 682.

Burnt area
9,414ha
GWIS perimeter (Copernicus)
Duration
9days
7 Oct 2022 – 15 Oct 2022
Municipalities hit
1
municipalities
Started on
7 Oct
2022
Heat detections
451
in a single hotspot: 165 MW
Danger at start
42
Very high · FWI index
Average daily power
976MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 7 Oct15 Oct
15 Oct 2022

How it evolved, day by day

7 Oct 2022 · 201 MW · 20 8 Oct 2022 · 3 MW · 1 9 Oct 2022 · 542 MW · 11 10 Oct 2022 · 141 MW · 8 11 Oct 2022 · 5,504 MW · 204 12 Oct 2022 · 1,532 MW · 99 13 Oct 2022 · 549 MW · 71 14 Oct 2022 · 210 MW · 29 15 Oct 2022 · 103 MW · 8
7 Oct 9 Oct 11 Oct 13 Oct 15 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
45km/h · peak gust
16%lowest humidity

It had gone 11 days without rain (1 mm or more) when it started. Rain came after the fire: 8.5 mm on 24 Oct.

This area had burned before

24% of the perimeter overlaps earlier fires recorded since 2016: 630 ha in 2016, 1,427 ha in 2017, 227 ha in 2020.

How big is it?

10 km
It burned the equivalent of 5.9% of the area of London (94 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. São Desidério 32,828 inhabitants where it started
    9,470 ha reached on 7 Oct
    0.6 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
7 Oct 36.2 °C 22 % 37 km/h 0.0 mm Very high 42
8 Oct 36.6 °C 24 % 27 km/h 0.1 mm High 36
9 Oct 35.8 °C 19 % 33 km/h 0.0 mm Very high 43
10 Oct 35.2 °C 19 % 44 km/h 0.0 mm Very high 48
11 Oct 35.1 °C 17 % 45 km/h 0.0 mm Very high 47
12 Oct 34.2 °C 19 % 38 km/h 0.0 mm Very high 44
13 Oct 34.2 °C 17 % 35 km/h 0.0 mm Very high 43
14 Oct 35.2 °C 16 % 35 km/h 0.0 mm Very high 44
15 Oct 33.4 °C 23 % 40 km/h 0.0 mm Very high 44
16 Oct after 33.7 °C 20 % 40 km/h 0.0 mm Very high 47
17 Oct after 33.3 °C 23 % 35 km/h 0.0 mm Very high 45
18 Oct after 35.3 °C 19 % 35 km/h 0.0 mm Very high 43
19 Oct after 35.3 °C 16 % 39 km/h 0.0 mm Very high 48
20 Oct after 35.7 °C 15 % 36 km/h 0.0 mm Very high 48
21 Oct after 35.5 °C 22 % 26 km/h 0.0 mm Very high 43
22 Oct after 35.0 °C 24 % 31 km/h 0.3 mm Very high 43
23 Oct after 32.6 °C 34 % 29 km/h 0.2 mm High 36
24 Oct after 27.4 °C 55 % 32 km/h 8.5 mm Very low 4

Its twins: fires that started in the same weather

It started with an FWI of 41.7, a minimum humidity of 22% and 11 days without rain. Fires in the area that started in weather like this since 2016: 21.

FWI at the start 41.7
Minimum humidity 22 %
Days without rain 11
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

São Desidério fire, September 2023
3,395 ha 6 days FWI 40.7 Min. humidity 20 % 16 km away, in 2023

First rain (1 mm or more) after it ended: 1.5 mm on 6 Oct.

What happened to them

8 days
median duration
4,519 ha
median area
14 %
went past 10,000 ha
1.5 mm
rain at the end (median; 9 of 21 had it)

It was 2.1 times larger than the median of its twins and lasted 9 days, against 8 days.

Only 4 of its 21 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 12 of 21, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.5 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

8.5 mmfirst rain
24 Oct9 days after it ended
45km/h · max. gust

It was considered over on 15 Oct, and on 24 Oct 8.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 9 of 21, with a median of 1.5 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 30 Sept 2022
After · 22 Oct 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 13 October 2022 the air beside the fire reached 66 µg/m³ of PM2.5. That day averaged 27: 1.8 times the WHO daily guideline (15).

PM2.5 peak66 µg/m³
Days over the guideline2 days
PM1094 µg/m³
Optical depth0.47
6 Oct9 Oct12 Oct15 Oct18 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 451Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the São Desidério fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 7 October 2022 to 15 October 2022 (9 days). The perimeter dates it from 8 October 2022 to 15 October 2022.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 9,414 hectares (94.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered São Desidério (9,470 ha, 0.6 %).
What was the weather like?
During the fire the temperature reached 36.6 °C, humidity dropped to 16 % and gusts hit 45 km/h. The fire danger index (FWI) reached 48, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 21. Their median duration was 8 days and their median area 4,519 ha; 14 % went past 10,000 ha. Only 4 of its 21 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 12 of 21, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.5 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 8 October 2022 → 7 October 2022.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 8 October 2022 to 15 October 2022. 451 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.