Skip to content
worldfires
BR · Brazil · –

São Desidério fire, 13 September 2021 São Desidério, Correntina

Out · last detection

The fire started on in São Desidério, Brazil, and satellites saw it burning for 15 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,883 hectares from heat detections, spread across 2 municipalities.

It is number 130 by size of the 386 fires with a page that started in Bahia since 2016. Number 253 in Brazil in 2021, of 814.

Burnt area
6,883ha
GWIS perimeter (Copernicus)
Duration
15days
13 Sept 2021 – 27 Sept 2021
Municipalities hit
2
municipalities
Started on
13 Sept
2021
Heat detections
288
in a single hotspot: 199 MW
Danger at start
58
Extreme · FWI index
Average daily power
275MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 13 Sept27 Sept
27 Sept 2021

How it evolved, day by day

13 Sept 2021 · 356 MW · 15 14 Sept 2021 · 807 MW · 121 15 Sept 2021 · 630 MW · 40 16 Sept 2021 · 217 MW · 41 17 Sept 2021 · 79 MW · 7 18 Sept 2021 · 11 MW · 1 19 Sept 2021 · 170 MW · 13 20 Sept 2021 · 218 MW · 7 21 Sept 2021 · 146 MW · 10 22 Sept 2021 · 1,040 MW · 21 23 Sept 2021 · 68 MW · 4 24 Sept 2021 · 12 MW · 3 26 Sept 2021 · 15 MW · 2 27 Sept 2021 · 82 MW · 3
13 Sept 16 Sept 19 Sept 22 Sept 26 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

39°high
40km/h · peak gust
10%lowest humidity

It had gone 10 days without rain (1 mm or more) when it started.

This area had burned before

12% of the perimeter overlaps earlier fires recorded since 2016: 796 ha in 2020.

How big is it?

10 km
It burned the equivalent of 4.3% of the area of London (69 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. São Desidério 32,828 inhabitants where it started
    6,908 ha reached on 13 Sept
    0.4 %
  2. Correntina 32,457 inhabitants
    20 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area1.0 ha
Residents≈ 100

Inside the perimeter there were about 1.0 hectares of built-up land and about 100 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 46 % of the area in Brazil Very dry air: 6.4 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
13 Sept 35.4 °C 13 % 35 km/h 0.0 mm Extreme 58
14 Sept 36.4 °C 12 % 29 km/h 0.0 mm Extreme 52
15 Sept 37.0 °C 10 % 30 km/h 0.0 mm Extreme 58
16 Sept 35.9 °C 11 % 40 km/h 0.0 mm Extreme 70
17 Sept 32.6 °C 21 % 39 km/h 0.0 mm Extreme 55
18 Sept 33.6 °C 15 % 36 km/h 0.0 mm Very high 48
19 Sept 36.3 °C 10 % 25 km/h 0.0 mm Very high 47
20 Sept 36.9 °C 13 % 37 km/h 0.0 mm Extreme 68
21 Sept 37.3 °C 17 % 30 km/h 0.0 mm Very high 45
22 Sept 39.3 °C 13 % 36 km/h 0.0 mm Very high 48
23 Sept 35.3 °C 26 % 35 km/h 0.0 mm Extreme 53
24 Sept 32.9 °C 35 % 34 km/h 0.0 mm Very high 39
25 Sept 32.7 °C 36 % 27 km/h 0.2 mm High 36
26 Sept 31.8 °C 35 % 30 km/h 0.0 mm Very high 39
27 Sept 34.3 °C 23 % 30 km/h 0.0 mm Very high 41
28 Sept after 34.5 °C 27 % 30 km/h 0.0 mm Very high 39
29 Sept after 35.4 °C 26 % 26 km/h 0.0 mm High 36
30 Sept after 35.5 °C 24 % 31 km/h 0.0 mm Very high 38
1 Oct after 36.4 °C 26 % 38 km/h 0.0 mm Very high 48
2 Oct after 35.1 °C 28 % 29 km/h 0.0 mm Very high 43
3 Oct after 36.5 °C 22 % 31 km/h 0.0 mm Very high 46
4 Oct after 37.3 °C 14 % 29 km/h 0.0 mm Very high 46
5 Oct after 37.7 °C 16 % 32 km/h 0.0 mm Very high 46
6 Oct after 37.2 °C 18 % 37 km/h 0.0 mm Extreme 65
7 Oct after 37.3 °C 20 % 30 km/h 0.0 mm Extreme 55

Its twins: fires that started in the same weather

It started with an FWI of 57.8, a minimum humidity of 13% and 10 days without rain. Fires in the area that started in weather like this since 2016: 26.

FWI at the start 57.8
Minimum humidity 13 %
Days without rain 10
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Mansidão fire, October 2023
3,333 ha 3 days FWI 57.2 Min. humidity 13 % 229 km away, in 2023

First rain (1 mm or more) after it ended: 5.7 mm on 2 Nov.

What happened to them

10 days
median duration
5,013 ha
median area
19 %
went past 10,000 ha
5.4 mm
rain at the end (median; 25 of 26 had it)

It burned an area similar to its twins (6,883 ha against a median of 5,013 ha) and lasted 15 days, against 10 days.

In 1 of 26, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.4 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
40km/h · max. gust

It was considered over on 27 Sept, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 25 of 26, with a median of 5.4 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 6 Sept 2021
After · 4 Oct 2021

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 288Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the São Desidério fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 13 September 2021 to 27 September 2021 (15 days). The perimeter dates it from 13 September 2021 to 24 September 2021.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,883 hectares (68.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: São Desidério (6,908 ha, 0.4 %); Correntina (20 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 39.3 °C, humidity dropped to 10 % and gusts hit 40 km/h. The fire danger index (FWI) reached 70, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 26. Their median duration was 10 days and their median area 5,013 ha; 19 % went past 10,000 ha. In 1 of 26, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.4 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 24 September 2021 → 27 September 2021.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 13 September 2021 to 24 September 2021. 288 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.