Santiago de Compostela fire, August 2016
Santiago de Compostela, Ames
Out · last detection 12 Aug 2016, 02:18 UTC
The fire started on 10 August 2016 in Santiago de Compostela, Spain, and satellites saw it burning for 3 days. Copernicus mapped a burnt perimeter of 948 hectares from satellite imagery, spread across 2 municipalities. According to EGIF (MITECO), it was detected on 10 August 2016 at 12:25 and declared extinguished on 14 August 2016.
It is the 3th largest in A Coruña since 2016 (of 20 with a page). Number 16 in Spain in 2016, of 69.
This is an index computed from weather model data, not a measurement of the fire nor an official warning. Danger warnings are issued by each country’s authority. Emergency number and official warnings ›
Weather during the fire
model
29.7°C · 29% RH
High of 29.7 °C and minimum humidity of 29% on 12 August 2016; gusts of 63 km/h on 10 August 2016.
These are model values for a cell of about 25 km, not from a weather station: they may differ from what was measured on the ground.
ⓘThis page’s change log has been kept since 24 October 2026: every night what it publishes is compared and the difference is logged. Anything earlier is reconstructed from each source’s date and marked as reconstructed.
Show
· reconstructedofficial
Matched with the official EGIF (MITECO) record
Matches: 825 ha in the official record (records: 1).
A version keeps the area, dates, name and official record; the area as it was logged (changes under 2% are not logged). The map, hotspots and weather always show today’s data.
Citation
A lede of about 60 words figures only, no adjectives
Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
What burned
Scrub and transitional woodland42 %
Other natural land22 %
Broadleaved forest16 %
Mixed forest14 %
Agricultural areas6.4 %
Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.
Official record
According to EGIF (MITECO), this fire started on 10 August 2016 and burned 825 ha (the satellite measured 948 ha).
Santiago de CompostelaFecha10 August 2016 · 12:25825 ha· extinguished on 14 August 2016· cause: arson
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
Fires in the area that started in similar weather: 6. With fewer than 15 we give no figures: they would be more noise than signal.
This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it
How it ended
2.8 mmfirst rain
17 Aug5 days after it ended
63km/h · max. gust
It was considered over on 12 Aug, and on 17 Aug 2.8 mm fell. We do not know whether the rain or the firefighters put it out.
Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
How a twin is chosen
Same area: fires that have already ended, less than 250 km from this one, since 2016.
Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
They are sorted by similarity, and the outlines of the first five are drawn.
Drag the line to compare the same ground before the fire and after it.
↔
Before · 3 Aug 2016
After · 19 Aug 2016
Sentinel-2 did not pass over on that day. Try another date, or use false colour, which is daily.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · Copernicus
On 13 August 2016 the air beside the fire reached 51 µg/m³ of PM2.5. That day averaged 38: 2.5 times the WHO daily guideline (15).
PM2.5 peak51µg/m³
Days over the guideline4days
PM1083µg/m³
WHO 15
8 Aug10 Aug12 Aug14 Aug
GoodFairModeratePoorVery poorExtremely poor
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table· 111Every satellite heat detection, one by one, with time, satellite, power and coordinates.›
⬇ Download CSVTimes in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
How long did the Santiago de Compostela fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 10 August 2016 to 12 August 2016 (3 days). The perimeter dates it from 10 August 2016 to 11 August 2016. According to EGIF (MITECO), it was detected on 10 August 2016 at 12:25 and declared extinguished on 14 August 2016.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 948 hectares (9.5 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Santiago de Compostela (693 ha, 3.2 %); Ames (256 ha, 3.2 %).
Did the fire reach a town?
The fire came within 6.5 km of the centre of Ames, the closest of the areas it touched. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 29.7 °C, humidity dropped to 29 % and gusts hit 63 km/h. The fire danger index (FWI) reached 42, class Very high.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Spain (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
⚑Report an errorHow we know this›
Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
Dates adjusted with the VIIRS detections inside the perimeter, which said 10 August 2016 to 11 August 2016. 111 Suomi-NPP VIIRS detections on those dates.
Compared with EGIF (MITECO): 825 official ha against 948 ha of perimeter; they agree within 25%.
Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.