Caldas de Reis fire, August 2022
Caldas de Reis, Vilagarcía de Arousa
Out · last detection
The fire started on in Caldas de Reis, Spain, and satellites saw it burning for 2 days. Copernicus mapped a burnt perimeter of 573 hectares from satellite imagery, spread across 2 municipalities. According to EGIF (MITECO), it was detected on 4 August 2022 at 19:25 and declared extinguished on 9 August 2022.
It is number 10 by size of the 33 fires with a page that started in Pontevedra since 2016. Number 59 in Spain in 2022, of 196.
This is an index computed from weather model data, not a measurement of the fire nor an official warning. Danger warnings are issued by each country’s authority. Emergency number and official warnings ›
Weather during the fire
model
27.1°C · 52% RH
High of 27.1 °C and minimum humidity of 52% on 5 August 2022; gusts of 54 km/h on 4 August 2022.
These are model values for a cell of about 25 km, not from a weather station: they may differ from what was measured on the ground.
Living inside
model
≈ 60people
Estimated residents inside the perimeter and 1.8 ha of built-up area (100 m grid, epoch 2020).
Source
GHSL R2023A · JRC
Date
calculated on 24 October 2026
+− cross-check
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
ⓘThis page’s change log has been kept since 24 October 2026: every night what it publishes is compared and the difference is logged. Anything earlier is reconstructed from each source’s date and marked as reconstructed.
Show
· reconstructedofficial
Matched with the official EGIF (MITECO) record
Matches: 561 ha in the official record (records: 1).
A version keeps the area, dates, name and official record; the area as it was logged (changes under 2% are not logged). The map, hotspots and weather always show today’s data.
Citation
A lede of about 60 words figures only, no adjectives
CSV for this fire caldas-de-reis-2022-08.csv · daily, no individual hotspots
fecha
focos_viirs
frp_mw
tmax_c
tmin_c
hr_min_pct
viento_max_kmh
racha_max_kmh
precip_mm
fwi
clase_fwi
dentro_del_incendio
2022-08-04
0
0
26.5
18.3
55
28.5
53.6
0
22.5
alto
1
2022-08-05
42
483
27.1
17.6
52
28
51.5
0
25.2
alto
1
2022-08-06
0
0
26.6
17.6
53
20.4
43.2
0
13.9
moderado
0
2022-08-07
0
0
22.8
16.5
67
11.6
24.1
0
15.3
moderado
0
2022-08-08
0
0
24.8
16.1
65
12.9
25.6
0
12.7
moderado
0
2022-08-09
0
0
24.7
17.1
64
14.9
24.1
0
13.9
moderado
0
2022-08-10
0
0
25
16.5
62
9.7
23
2.4
14.7
moderado
0
It is generated in your browser from this page’s data: one file per fire, aggregated by day and without individual hotspots.
Live widget for your story
It updates itself while the fire is still active and links to this page. Free, with the attribution shown at the bottom.
Sources for this page: EFFIS (Copernicus), NASA FIRMS (VIIRS), EGIF (MITECO), ERA5 (ECMWF/Copernicus C3S) · Open-Meteo.com (CC BY 4.0), GHSL (JRC). Open-Meteo.com · How we build fire pages: methodology
Burnt area
573ha
Copernicus perimeter
Duration
2days
4 Aug 2022 – 5 Aug 2022
Municipalities hit
2
municipalities
Started on
4 Aug
2022
Heat detections
42
in a single hotspot: 44 MW
Danger at start
22
High · FWI index
Average daily power
483MW
detected power per day, on average
Where it burned
HOTSPOTS BY DAY
4 Aug5 Aug
How it evolved, day by day
5 Aug 2022 · 483 MW · 42
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
27°high
54km/h · peak gust
52%lowest humidity
It had gone 15 days without rain (1 mm or more) when it started. Rain came after the fire: 2.4 mm on 10 Aug.
This area had burned before
40% of the perimeter overlaps earlier fires recorded since 2016: 231 ha in 2016.
Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
What burned
Scrub and transitional woodland36 %
Coniferous forest35 %
Broadleaved forest19 %
Mixed forest7.1 %
Agricultural areas1.7 %
Artificial surfaces1.4 %
Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.
People and buildings inside the perimeter
GHSL 2020
Built-up area1.8ha
Residents≈ 60
Inside the perimeter there were about 1.8 hectares of built-up land and about 60 residents (GHSL 2020, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
It started with an FWI of 22.5, a minimum humidity of 55% and 15 days without rain. Fires in the area that started in weather like this since 2016: 31.
FWI at the start22.5
Minimum humidity55 %
Days without rain15
this firechosen twinsrest of the area
Almost identicalSimilar
Outlines of the closest twins
This fire · Caldas de Reis fire, August 2022
573 ha2 daysFWI 22.5Min. humidity 55 %
Castelo de Paiva fire, August 2017
149 ha2 daysFWI 23.3Min. humidity 54 %180 km away, in 2017
First rain (1 mm or more) after it ended: none in the following ten days.
It was 2.4 times larger than the median of its twins and lasted 2 days, against 2 days.
Only 4 of its 31 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 8 of 31, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.4 mm.
This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it
How it ended
2.4 mmfirst rain
10 Aug5 days after it ended
54km/h · max. gust
It was considered over on 5 Aug, and on 10 Aug 2.4 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 23 of 31, with a median of 3.4 mm.
Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
How a twin is chosen
Same area: fires that have already ended, less than 250 km from this one, since 2016.
Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
They are sorted by similarity, and the outlines of the first five are drawn.
Drag the line to compare the same ground before the fire and after it.
↔
Before · 28 Jul 2022
After · 12 Aug 2022
Sentinel-2 did not pass over on that day. Try another date, or use false colour, which is daily.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · Copernicus
On 6 August 2022 the air beside the fire reached 587 µg/m³ of PM2.5. That day averaged 188: 13 times the WHO daily guideline (15).
PM2.5 peak587µg/m³
Days over the guideline4days
PM10138µg/m³
Optical depth0.77
WHO 15
45678
GoodFairModeratePoorVery poorExtremely poor
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table· 42Every satellite heat detection, one by one, with time, satellite, power and coordinates.›
⬇ Download CSVTimes in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Copernicus dates it between 4 August 2022 and 5 August 2022: 2 days between the first and last image with fire. According to EGIF (MITECO), it was detected on 4 August 2022 at 19:25 and declared extinguished on 9 August 2022.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 573 hectares (5.7 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Caldas de Reis (306 ha, 4.5 %); Vilagarcía de Arousa (267 ha, 6.0 %).
Did the fire reach a town?
The fire came within 0.7 km of the centre of Vilagarcía de Arousa, the closest of the areas it touched. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 27.1 °C, humidity dropped to 52 % and gusts hit 54 km/h. The fire danger index (FWI) reached 25, class High.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Spain (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 31. Their median duration was 2 days and their median area 243 ha; 10 % went past 1,000 ha. Only 4 of its 31 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 8 of 31, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.4 mm.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
⚑Report an errorHow we know this›
Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
Dates from the perimeter: the VIIRS detections inside it did not change them. 42 Suomi-NPP VIIRS detections on those dates.
Compared with EGIF (MITECO): 561 official ha against 573 ha of perimeter; they agree within 25%.
Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.