Skip to content
worldfires
BR · Brazil · –

Cumaru do Norte fire, 20 August 2017 Cumaru do Norte, Bannach

Out · last detection 6 Sept 2017, 16:38 UTC

The fire started on 20 August 2017 in Cumaru do Norte, Brazil, and satellites saw it burning for 18 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 9,449 hectares from heat detections, spread across 2 municipalities.

It is the 214th largest in Pará since 2016 (of 957 with a page). Number 188 in Brazil in 2017, of 994.

Burnt area
9,449ha
GWIS perimeter (Copernicus)
Duration
18days
20 Aug 2017 – 6 Sept 2017
Municipalities hit
2
municipalities
Started on
20 Aug
2017
Heat detections
350
in a single hotspot: 103 MW
Danger at start
45
Very high · FWI index
Average daily power
229MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 20 Aug6 Sept
6 Sept 2017

How it evolved, day by day

20 Aug 2017 · 6 MW · 1 21 Aug 2017 · 364 MW · 19 24 Aug 2017 · 419 MW · 37 25 Aug 2017 · 242 MW · 40 26 Aug 2017 · 284 MW · 24 27 Aug 2017 · 58 MW · 9 28 Aug 2017 · 360 MW · 30 29 Aug 2017 · 18 MW · 8 30 Aug 2017 · 659 MW · 47 31 Aug 2017 · 144 MW · 17 1 Sept 2017 · 70 MW · 9 2 Sept 2017 · 61 MW · 17 3 Sept 2017 · 122 MW · 22 4 Sept 2017 · 719 MW · 38 5 Sept 2017 · 111 MW · 26 6 Sept 2017 · 24 MW · 6
20 Aug 26 Aug 30 Aug 4 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
50km/h · peak gust
22%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 6% of the area of London (94 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Cumaru do Norte 14,036 inhabitants where it started
    6,574 ha reached on 20 Aug
    0.4 %
  2. Bannach 4,031 inhabitants
    2,962 ha reached on 21 Aug
    1.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area0.40 ha
Residents≈ 30

Inside the perimeter there were about 0.40 hectares of built-up land and about 30 residents (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
20 Aug 34.6 °C 32 % 30 km/h 0.0 mm Very high 45
21 Aug 35.0 °C 24 % 30 km/h 0.0 mm Very high 48
22 Aug 35.1 °C 30 % 28 km/h 0.0 mm Very high 40
23 Aug 33.6 °C 29 % 50 km/h 0.0 mm Extreme 65
24 Aug 34.3 °C 25 % 45 km/h 0.0 mm Extreme 58
25 Aug 34.9 °C 27 % 42 km/h 0.0 mm Extreme 57
26 Aug 34.5 °C 26 % 38 km/h 0.0 mm Extreme 56
27 Aug 35.2 °C 25 % 41 km/h 0.0 mm Extreme 55
28 Aug 35.3 °C 24 % 37 km/h 0.0 mm Extreme 56
29 Aug 34.8 °C 26 % 32 km/h 0.0 mm Very high 49
30 Aug 35.5 °C 27 % 31 km/h 0.0 mm Very high 45
31 Aug 36.0 °C 24 % 35 km/h 0.0 mm Extreme 50
1 Sept 34.2 °C 30 % 31 km/h 0.0 mm Very high 41
2 Sept 32.9 °C 33 % 38 km/h 0.0 mm Extreme 54
3 Sept 34.2 °C 22 % 40 km/h 0.0 mm Extreme 60
4 Sept 33.2 °C 28 % 44 km/h 0.0 mm Extreme 58
5 Sept 34.3 °C 28 % 42 km/h 0.0 mm Extreme 56
6 Sept 34.5 °C 27 % 42 km/h 0.0 mm Extreme 60
7 Sept after 34.8 °C 31 % 41 km/h 0.0 mm Extreme 59
8 Sept after 34.4 °C 33 % 38 km/h 0.0 mm Very high 48
9 Sept after 33.7 °C 31 % 41 km/h 0.0 mm Extreme 54
10 Sept after 35.5 °C 27 % 41 km/h 0.0 mm Extreme 55
11 Sept after 35.7 °C 27 % 41 km/h 0.0 mm Extreme 55
12 Sept after 35.5 °C 23 % 44 km/h 0.0 mm Extreme 60
13 Sept after 34.5 °C 27 % 42 km/h 0.0 mm Extreme 55
14 Sept after 35.3 °C 26 % 35 km/h 0.0 mm Extreme 53
15 Sept after 35.9 °C 25 % 44 km/h 0.0 mm Extreme 60
16 Sept after 35.0 °C 21 % 43 km/h 0.0 mm Extreme 63

Its twins: fires that started in the same weather

It started with an FWI of 45.1, a minimum humidity of 32% and more than two months without rain. Fires in the area that started in weather like this since 2016: 19.

FWI at the start 45.1
Minimum humidity 32 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

São Félix do Xingu fire, July 2024
6,728 ha 18 days FWI 45.3 Min. humidity 31 % 173 km away, in 2024

First rain (1 mm or more) after it ended: 1.8 mm on 14 Aug.

What happened to them

16 days
median duration
4,935 ha
median area
11 %
went past 10,000 ha
2.0 mm
rain at the end (median; 13 of 19 had it)

It was 1.9 times larger than the median of its twins and lasted 18 days, against 16 days.

Only 3 of its 19 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 6 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
50km/h · max. gust

It was considered over on 6 Sept, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 13 of 19, with a median of 2.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 13 Aug 2017
After · 13 Sept 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 350Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Cumaru do Norte fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 20 August 2017 to 6 September 2017 (18 days). The perimeter dates it from 23 August 2017 to 6 September 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 9,449 hectares (94.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Cumaru do Norte (6,574 ha, 0.4 %); Bannach (2,962 ha, 1.0 %).
What was the weather like?
During the fire the temperature reached 36.0 °C, humidity dropped to 22 % and gusts hit 50 km/h. The fire danger index (FWI) reached 65, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 19. Their median duration was 16 days and their median area 4,935 ha; 11 % went past 10,000 ha. Only 3 of its 19 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 6 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 23 August 2017 → 20 August 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 23 August 2017 to 6 September 2017. 350 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.