Skip to content
worldfires
AU · Australia · –

West Arnhem fire, 18 July 2026 West Arnhem, Victoria Daly

Out · last detection 8 Aug 2026, 05:10 UTC

The fire started on 18 July 2026 in West Arnhem, Australia, and satellites saw it burning for 22 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 41,808 hectares from heat detections, spread across 2 municipalities.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
41,808ha
GWIS perimeter (Copernicus)
Duration
22days
18 Jul 2026 – 8 Aug 2026
Municipalities hit
2
local government areas
Started on
18 Jul
2026
Heat detections
1,059
in a single hotspot: 154 MW
Danger at start
30
High · FWI index
Average daily power
487MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 18 Jul8 Aug
8 Aug 2026

How it evolved, day by day

18 Jul 2026 · 6 MW · 2 19 Jul 2026 · 28 MW · 7 20 Jul 2026 · 26 MW · 7 21 Jul 2026 · 9 MW · 2 22 Jul 2026 · 109 MW · 11 23 Jul 2026 · 107 MW · 15 24 Jul 2026 · 162 MW · 31 25 Jul 2026 · 182 MW · 39 26 Jul 2026 · 2 MW · 1 27 Jul 2026 · 17 MW · 8 28 Jul 2026 · 67 MW · 28 29 Jul 2026 · 268 MW · 51 30 Jul 2026 · 423 MW · 45 31 Jul 2026 · 1,351 MW · 90 1 Aug 2026 · 1,487 MW · 161 2 Aug 2026 · 1,696 MW · 119 3 Aug 2026 · 137 MW · 25 4 Aug 2026 · 1,726 MW · 146 5 Aug 2026 · 647 MW · 114 6 Aug 2026 · 2,050 MW · 114 7 Aug 2026 · 102 MW · 28 8 Aug 2026 · 120 MW · 15
18 Jul 23 Jul 28 Jul 2 Aug 6 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (46 passes) and with what wind. Watch the film

The weather it burned in

34°high
45km/h · peak gust
13%lowest humidity

It had gone 9 days without rain (1 mm or more) when it started.

This area had burned before

99% of the perimeter overlaps earlier fires recorded since 2016: 9,255 ha in 2016, 12,544 ha in 2017, 11,235 ha in 2018, 29,375 ha in 2019, 5,922 ha in 2020, 12,922 ha in 2021, 19,806 ha in 2022, 9,149 ha in 2023, 13,388 ha in 2024, 17,065 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 41,519 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 26% of the area of London (418 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. West Arnhem where it started
    42,357 ha reached on 18 Jul
    0.8 %
  2. 91 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
18 Jul 30.1 °C 15 % 21 km/h 0.0 mm High 30
19 Jul 30.2 °C 13 % 20 km/h 0.0 mm High 33
20 Jul 30.8 °C 14 % 20 km/h 0.0 mm High 34
21 Jul 31.8 °C 18 % 15 km/h 0.0 mm High 31
22 Jul 31.4 °C 15 % 16 km/h 0.0 mm High 34
23 Jul 32.8 °C 20 % 20 km/h 0.0 mm Very high 38
24 Jul 32.2 °C 21 % 25 km/h 0.0 mm Very high 44
25 Jul 31.1 °C 19 % 22 km/h 0.0 mm Very high 43
26 Jul 30.2 °C 25 % 19 km/h 0.0 mm High 38
27 Jul 31.0 °C 17 % 18 km/h 0.0 mm High 37
28 Jul 29.0 °C 17 % 28 km/h 0.0 mm High 35
29 Jul 30.2 °C 23 % 31 km/h 0.0 mm High 37
30 Jul 32.2 °C 28 % 34 km/h 0.0 mm High 38
31 Jul 32.2 °C 29 % 41 km/h 0.0 mm Very high 41
1 Aug 31.6 °C 24 % 45 km/h 0.0 mm Very high 43
2 Aug 31.8 °C 21 % 36 km/h 0.0 mm Very high 40
3 Aug 33.0 °C 29 % 29 km/h 0.0 mm High 37
4 Aug 32.9 °C 23 % 38 km/h 0.0 mm Very high 42
5 Aug 32.2 °C 24 % 41 km/h 0.0 mm Very high 44
6 Aug 32.5 °C 22 % 34 km/h 0.0 mm Very high 41
7 Aug 32.8 °C 25 % 34 km/h 0.0 mm Very high 42
8 Aug 33.4 °C 23 % 23 km/h 0.0 mm High 36
9 Aug after 32.2 °C 37 % 21 km/h 0.0 mm High 31
10 Aug after 32.8 °C 37 % 18 km/h 0.0 mm High 31
11 Aug after 32.7 °C 38 % 19 km/h 0.0 mm High 30
12 Aug after 33.5 °C 37 % 15 km/h 0.0 mm High 28
13 Aug after 34.0 °C 30 % 26 km/h 0.0 mm High 34
14 Aug after 34.5 °C 24 % 35 km/h 0.0 mm Very high 42
15 Aug after 34.5 °C 23 % 30 km/h 0.0 mm Very high 40
16 Aug after 34.5 °C 21 % 24 km/h 0.0 mm Very high 38
17 Aug after 34.5 °C 19 % 30 km/h 0.0 mm Very high 42
18 Aug after 34.2 °C 21 % 35 km/h 0.0 mm Very high 45
19 Aug after 34.2 °C 18 % 38 km/h 0.0 mm Very high 49
20 Aug after 34.0 °C 14 % 36 km/h 0.0 mm Extreme 51
21 Aug after 34.5 °C 20 % 36 km/h 0.0 mm Extreme 52
22 Aug after 34.2 °C 22 % 31 km/h 0.0 mm Very high 48
23 Aug after 34.5 °C 22 % 33 km/h 0.0 mm Very high 49

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 11 Jul 2026
After · 15 Aug 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 30 July 2026 the air beside the fire reached 30 µg/m³ of PM2.5. That day averaged 16: 1.1 times the WHO daily guideline (15).

PM2.5 peak30 µg/m³
Days over the guideline1 day
PM1033 µg/m³
Optical depth0.46
16 Jul23 Jul30 Jul6 Aug13 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1,059Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the West Arnhem fire last?
GWIS (Copernicus) dates it between 18 July 2026 and 8 August 2026: 22 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 41,808 hectares (418.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: West Arnhem (42,357 ha, 0.8 %); Victoria Daly (91 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 34.0 °C, humidity dropped to 13 % and gusts hit 45 km/h. The fire danger index (FWI) reached 44, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 1,059 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.