Skip to content
worldfires
AU · Australia · –

West Arnhem fire, 21 September 2019 West Arnhem, Roper Gulf

Out · last detection 13 Oct 2019, 05:04 UTC

The fire started on 21 September 2019 in West Arnhem, Australia, and satellites saw it burning for 23 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 23,368 hectares from heat detections, spread across 2 municipalities.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
23,368ha
GWIS perimeter (Copernicus)
Duration
23days
21 Sept 2019 – 13 Oct 2019
Municipalities hit
2
local government areas
Started on
21 Sept
2019
Heat detections
799
in a single hotspot: 359 MW
Danger at start
37
High · FWI index
Average daily power
542MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 21 Sept13 Oct
13 Oct 2019

How it evolved, day by day

21 Sept 2019 · 2 MW · 2 23 Sept 2019 · 173 MW · 27 24 Sept 2019 · 737 MW · 41 25 Sept 2019 · 220 MW · 41 26 Sept 2019 · 330 MW · 41 27 Sept 2019 · 520 MW · 53 28 Sept 2019 · 446 MW · 87 29 Sept 2019 · 5,376 MW · 137 30 Sept 2019 · 182 MW · 35 1 Oct 2019 · 1,573 MW · 77 2 Oct 2019 · 471 MW · 41 3 Oct 2019 · 522 MW · 46 4 Oct 2019 · 526 MW · 67 5 Oct 2019 · 393 MW · 45 6 Oct 2019 · 200 MW · 19 7 Oct 2019 · 22 MW · 5 8 Oct 2019 · 40 MW · 7 9 Oct 2019 · 59 MW · 7 10 Oct 2019 · 47 MW · 5 11 Oct 2019 · 27 MW · 4 12 Oct 2019 · 56 MW · 11 13 Oct 2019 · 7 MW · 1
21 Sept 29 Sept 7 Oct 12 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
47km/h · peak gust
9%lowest humidity

It had gone 32 days without rain (1 mm or more) when it started.

This area had burned before

63% of the perimeter overlaps earlier fires recorded since 2016: 937 ha in 2016, 4,218 ha in 2017, 11,036 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 14,615 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 15% of the area of London (234 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. West Arnhem where it started
    16,481 ha reached on 21 Sept
    0.3 %
  2. 7,035 ha reached on 29 Sept
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
21 Sept 33.7 °C 26 % 32 km/h 0.0 mm High 37
22 Sept 35.1 °C 23 % 34 km/h 0.0 mm Very high 47
23 Sept 35.0 °C 26 % 45 km/h 0.0 mm Extreme 54
24 Sept 35.3 °C 22 % 30 km/h 0.0 mm Very high 43
25 Sept 33.8 °C 26 % 41 km/h 0.0 mm Extreme 54
26 Sept 34.9 °C 22 % 42 km/h 0.0 mm Extreme 56
27 Sept 35.7 °C 22 % 44 km/h 0.0 mm Extreme 59
28 Sept 35.9 °C 22 % 37 km/h 0.0 mm Extreme 53
29 Sept 36.6 °C 17 % 39 km/h 0.0 mm Extreme 52
30 Sept 36.7 °C 17 % 33 km/h 0.0 mm Very high 46
1 Oct 37.6 °C 15 % 47 km/h 0.0 mm Very extreme 71
2 Oct 37.2 °C 16 % 45 km/h 0.0 mm Extreme 68
3 Oct 35.8 °C 17 % 37 km/h 0.0 mm Extreme 60
4 Oct 35.3 °C 16 % 46 km/h 0.0 mm Extreme 69
5 Oct 35.2 °C 17 % 37 km/h 0.0 mm Extreme 62
6 Oct 35.1 °C 17 % 32 km/h 0.0 mm Extreme 52
7 Oct 35.8 °C 16 % 34 km/h 0.0 mm Very high 48
8 Oct 36.6 °C 22 % 30 km/h 0.0 mm Very high 44
9 Oct 37.2 °C 17 % 46 km/h 0.0 mm Extreme 69
10 Oct 37.0 °C 13 % 42 km/h 0.0 mm Very extreme 70
11 Oct 37.3 °C 9 % 36 km/h 0.0 mm Extreme 69
12 Oct 37.7 °C 12 % 32 km/h 0.0 mm Extreme 52
13 Oct 37.9 °C 11 % 37 km/h 0.0 mm Extreme 57
14 Oct after 37.3 °C 12 % 32 km/h 0.0 mm Extreme 60
15 Oct after 36.6 °C 17 % 30 km/h 0.0 mm Extreme 57
16 Oct after 38.3 °C 16 % 28 km/h 0.0 mm Very high 47
17 Oct after 39.2 °C 12 % 38 km/h 0.0 mm Extreme 61
18 Oct after 41.0 °C 11 % 45 km/h 0.0 mm Extreme 56
19 Oct after 40.1 °C 15 % 49 km/h 0.0 mm Extreme 68
20 Oct after 39.8 °C 10 % 59 km/h 0.0 mm Very extreme 108
21 Oct after 37.8 °C 7 % 54 km/h 0.0 mm Very extreme 94
22 Oct after 36.2 °C 10 % 40 km/h 0.0 mm Very extreme 76
23 Oct after 36.8 °C 17 % 38 km/h 0.0 mm Extreme 60

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 14 Sept 2019
After · 20 Oct 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 799Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the West Arnhem fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 21 September 2019 to 13 October 2019 (23 days). The perimeter dates it from 23 September 2019 to 13 October 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 23,368 hectares (233.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: West Arnhem (16,481 ha, 0.3 %); Roper Gulf (7,035 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 37.9 °C, humidity dropped to 9 % and gusts hit 47 km/h. The fire danger index (FWI) reached 71, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 23 September 2019 → 21 September 2019.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 23 September 2019 to 13 October 2019. 799 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.