Skip to content
worldfires
AU · Australia · –

Victoria Daly fire, 31 August 2024 Victoria Daly, West Arnhem, Roper Gulf

Out · last detection

The fire started on in Victoria Daly, Australia, and satellites saw it burning for 24 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 37,180 hectares from heat detections, spread across 3 municipalities.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
37,180ha
GWIS perimeter (Copernicus)
Duration
24days
31 Aug 2024 – 23 Sept 2024
Municipalities hit
3
local government areas
Started on
31 Aug
2024
Heat detections
1,482
in a single hotspot: 78 MW
Danger at start
31
High · FWI index
Average daily power
567MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 31 Aug23 Sept
23 Sept 2024

How it evolved, day by day

1 Sept 2024 · 5 MW · 4 2 Sept 2024 · 128 MW · 17 3 Sept 2024 · 250 MW · 35 4 Sept 2024 · 118 MW · 35 5 Sept 2024 · 255 MW · 38 6 Sept 2024 · 77 MW · 20 7 Sept 2024 · 78 MW · 26 8 Sept 2024 · 270 MW · 60 9 Sept 2024 · 798 MW · 48 10 Sept 2024 · 1,299 MW · 174 11 Sept 2024 · 1,971 MW · 237 12 Sept 2024 · 2,024 MW · 284 13 Sept 2024 · 844 MW · 141 14 Sept 2024 · 2,324 MW · 229 15 Sept 2024 · 807 MW · 114 16 Sept 2024 · 50 MW · 8 19 Sept 2024 · 11 MW · 2 20 Sept 2024 · 10 MW · 4 22 Sept 2024 · 1 MW · 1 23 Sept 2024 · 27 MW · 5
1 Sept 5 Sept 9 Sept 14 Sept 19 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
53km/h · peak gust
17%lowest humidity

It had gone 33 days without rain (1 mm or more) when it started.

This area had burned before

99% of the perimeter overlaps earlier fires recorded since 2016: 18,225 ha in 2016, 10,543 ha in 2017, 16,484 ha in 2018, 26,436 ha in 2019, 13,216 ha in 2020, 17,149 ha in 2021, 11,585 ha in 2022, 19,160 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 36,819 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 23% of the area of London (372 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Victoria Daly where it started
    21,203 ha
    0.1 %
  2. 15,932 ha
    0.3 %
  3. 311 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.47 ha
Residents< 20

Inside the perimeter there were about 0.47 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
31 Aug 35.4 °C 31 % 27 km/h 0.0 mm High 31
1 Sept 35.1 °C 28 % 27 km/h 0.0 mm High 36
2 Sept 36.9 °C 21 % 41 km/h 0.0 mm Extreme 57
3 Sept 36.4 °C 26 % 53 km/h 0.0 mm Very extreme 74
4 Sept 35.4 °C 26 % 44 km/h 0.0 mm Extreme 62
5 Sept 34.4 °C 29 % 37 km/h 0.0 mm Very high 50
6 Sept 35.2 °C 29 % 38 km/h 0.0 mm Very high 49
7 Sept 35.5 °C 29 % 36 km/h 0.0 mm Very high 50
8 Sept 35.2 °C 24 % 39 km/h 0.0 mm Extreme 52
9 Sept 35.1 °C 21 % 44 km/h 0.0 mm Extreme 60
10 Sept 35.6 °C 22 % 44 km/h 0.0 mm Extreme 64
11 Sept 35.5 °C 23 % 41 km/h 0.0 mm Extreme 54
12 Sept 36.1 °C 19 % 52 km/h 0.0 mm Very extreme 75
13 Sept 34.8 °C 19 % 49 km/h 0.0 mm Very extreme 74
14 Sept 34.8 °C 17 % 44 km/h 0.0 mm Very extreme 72
15 Sept 35.0 °C 26 % 25 km/h 0.1 mm Very high 42
16 Sept 33.9 °C 33 % 33 km/h 0.5 mm Very high 43
17 Sept 27.6 °C 41 % 44 km/h 3.5 mm Moderate 11
18 Sept 32.9 °C 36 % 45 km/h 0.7 mm High 36
19 Sept 35.3 °C 37 % 37 km/h 0.0 mm High 35
20 Sept 37.1 °C 27 % 28 km/h 0.0 mm High 37
21 Sept 34.7 °C 38 % 36 km/h 0.0 mm High 32
22 Sept 37.3 °C 18 % 32 km/h 0.0 mm Very high 44
23 Sept 37.4 °C 21 % 30 km/h 0.0 mm Very high 43
24 Sept after 36.3 °C 32 % 30 km/h 0.3 mm High 36
25 Sept after 37.0 °C 30 % 22 km/h 0.0 mm High 36
26 Sept after 35.7 °C 38 % 28 km/h 0.8 mm High 31
27 Sept after 36.5 °C 31 % 31 km/h 0.3 mm High 33
28 Sept after 37.0 °C 31 % 30 km/h 0.0 mm High 32
29 Sept after 38.6 °C 20 % 34 km/h 0.0 mm Very high 49
30 Sept after 38.6 °C 11 % 39 km/h 0.0 mm Very extreme 77
1 Oct after 38.0 °C 13 % 47 km/h 0.0 mm Very extreme 87
2 Oct after 37.7 °C 24 % 44 km/h 0.0 mm Very extreme 71
3 Oct after 37.3 °C 24 % 26 km/h 0.0 mm Very high 41

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 24 Aug 2024
After · 30 Sept 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 15 September 2024 the air beside the fire reached 28 µg/m³ of PM2.5. That day averaged 15: 1.0 times the WHO daily guideline (15).

PM2.5 peak28 µg/m³
Days over the guideline1 day
PM1041 µg/m³
Optical depth0.52
29 Aug3 Sept8 Sept13 Sept18 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1,482Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Victoria Daly fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 31 August 2024 to 23 September 2024 (24 days). The perimeter dates it from 31 August 2024 to 16 September 2024.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 37,180 hectares (371.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Victoria Daly (21,203 ha, 0.1 %); West Arnhem (15,932 ha, 0.3 %); Roper Gulf (311 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 37.4 °C, humidity dropped to 17 % and gusts hit 53 km/h. The fire danger index (FWI) reached 75, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 16 September 2024 → 23 September 2024.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 31 August 2024 to 16 September 2024. 1,482 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.