Skip to content
worldfires
PT · Portugal · –

Vila Nova de Foz Côa fire, 13 August 2016 Longroiva, Mêda, Outeiro de Gatos e Fonte Longa, Muxagata

Out · last detection 14 Aug 2016, 03:21 UTC

The fire started on 13 August 2016 in Longroiva, Portugal, and satellites saw it burning for 2 days. Copernicus mapped a burnt perimeter of 195 hectares from satellite imagery, spread across 3 freguesias.

Number 115 in Portugal in 2016, of 180.

The power measured by the satellite is low (3.1 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
195ha
Copernicus perimeter
Duration
2days
13 Aug 2016 – 14 Aug 2016
Freguesias hit
3
freguesias
Started on
13 Aug
2016
Heat detections
5
in a single hotspot: 3 MW
Danger at start
30
High · FWI index
Average daily power
7MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 13 Aug14 Aug

How it evolved, day by day

14 Aug 2016 · 7 MW · 5

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
28km/h · peak gust
24%lowest humidity

It had gone 36 days without rain (1 mm or more) when it started. Rain came after the fire: 1.5 mm on 24 Aug.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

What happened to each freguesia

  1. Longroiva 218 inhabitants · 6.2 km from the centre where it started
    95 ha reached on 14 Aug
    2.3 %
  2. Mêda, Outeiro de Gatos e Fonte Longa 2,399 inhabitants · 7.0 km from the centre
    52 ha
    1.0 %
  3. Muxagata 2.9 km from the centre
    48 ha
    1.8 %

Burnt area inside each freguesia, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Sclerophyllous scrub69 %
  • Scrub and transitional woodland19 %
  • Agricultural areas12 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

Official record

According to ICNF, this fire started on 13 August 2016 and burned 253 ha (the satellite measured 195 ha). The two figures differ a lot, so these may not be exactly the same fire: take them as nearby records.

ICNF (Instituto da Conservação da Natureza e das Florestas). This is the agency’s operational record: its figures may be revised when the year’s statistics are closed.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
13 Aug 32.8 °C 24 % 22 km/h 0.0 mm High 30
14 Aug 32.9 °C 28 % 28 km/h 0.1 mm High 32
15 Aug after 32.0 °C 25 % 38 km/h 0.2 mm Very high 38
16 Aug after 30.6 °C 28 % 40 km/h 0.0 mm High 37
17 Aug after 27.6 °C 43 % 35 km/h 0.2 mm High 32
18 Aug after 29.4 °C 32 % 30 km/h 0.0 mm High 23
19 Aug after 25.9 °C 57 % 36 km/h 0.5 mm High 26
20 Aug after 26.2 °C 28 % 31 km/h 0.0 mm High 32
21 Aug after 30.3 °C 23 % 32 km/h 0.0 mm High 36
22 Aug after 34.6 °C 21 % 19 km/h 0.0 mm High 30
23 Aug after 35.5 °C 28 % 30 km/h 0.2 mm High 36
24 Aug after 32.2 °C 35 % 31 km/h 1.5 mm High 36

Its twins: fires that started in the same weather

It started with an FWI of 29.7, a minimum humidity of 24% and 36 days without rain. Fires in the area that started in weather like this since 2016: 45.

FWI at the start 29.7
Minimum humidity 24 %
Days without rain 36
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Castro Daire fire, October 2017
421 ha 5 days FWI 31.7 Min. humidity 23 % 78 km away, in 2017

First rain (1 mm or more) after it ended: 2.1 mm on 16 Oct.

What happened to them

2 days
median duration
505 ha
median area
22 %
went past 1,000 ha
3.0 mm
rain at the end (median; 33 of 45 had it)

It stayed below its twins: 195 ha against a median of 505 ha. It lasted 2 days, against 2 days.

In 12 of 45, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.5 mmfirst rain
24 Aug10 days after it ended
28km/h · max. gust

It was considered over on 14 Aug, and on 24 Aug 1.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 33 of 45, with a median of 3.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 6 Aug 2016
After · 21 Aug 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 13 August 2016 the air beside the fire reached 73 µg/m³ of PM2.5. That day averaged 50: 3.4 times the WHO daily guideline (15).

PM2.5 peak73 µg/m³
Days over the guideline4 days
PM1078 µg/m³
11 Aug13 Aug15 Aug17 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 5Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Portugal

Frequently asked questions

How long did the Vila Nova de Foz Côa fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 13 August 2016 to 14 August 2016 (2 days). The perimeter dates it from 13 August 2016 to 13 August 2016.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 195 hectares (2.0 km²). Official national figures may differ.
Which freguesias burned?
The fire entered 3 freguesias: Longroiva (95 ha, 2.3 %); Mêda, Outeiro de Gatos e Fonte Longa (52 ha, 1.0 %); Muxagata (48 ha, 1.8 %).
Did the fire reach a town?
The fire came within 2.9 km of the centre of Muxagata, the closest of the areas it touched. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 32.9 °C, humidity dropped to 24 % and gusts hit 28 km/h. The fire danger index (FWI) reached 32, class High.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Portugal (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 45. Their median duration was 2 days and their median area 505 ha; 22 % went past 1,000 ha. In 12 of 45, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 13 August 2016 to 13 August 2016. 5 Suomi-NPP VIIRS detections on those dates.
  • Compared with ICNF: 253 official ha against 195 ha of perimeter; similar, but with reservations.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Freguesia boundaries come from geoBoundaries ADM3 (CC0 1.0 Universal (CC0 1.0) Public Domain Dedication). The area per freguesia is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.