Skip to content
worldfires
PT · Portugal · –

Vale Flor, Carvalhal e Pai Penela fire, August 2016 Vale Flor, Carvalhal e Pai Penela, Rabaçal, Marialva

Out · last detection 11 Aug 2016, 12:20 UTC

The fire started on 9 August 2016 in Vale Flor, Carvalhal e Pai Penela, Portugal, and satellites saw it burning for 3 days. Copernicus mapped a burnt perimeter of 361 hectares from satellite imagery, spread across 3 freguesias. According to ICNF, it was detected on 9 August 2016 at 21:52 and declared extinguished on 10 August 2016.

Number 73 in Portugal in 2016, of 180.

The power measured by the satellite is low (28.2 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
361ha
Copernicus perimeter
Duration
3days
9 Aug 2016 – 11 Aug 2016
Freguesias hit
3
freguesias
Started on
9 Aug
2016
Heat detections
38
in a single hotspot: 28 MW
Danger at start
40
Very high · FWI index
Average daily power
194MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 9 Aug11 Aug
11 Aug 2016

How it evolved, day by day

10 Aug 2016 · 372 MW · 35 11 Aug 2016 · 16 MW · 3
10 Aug 11 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

31°high
52km/h · peak gust
23%lowest humidity

It had gone 32 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

What happened to each freguesia

  1. Vale Flor, Carvalhal e Pai Penela 255 inhabitants · 1.9 km from the centre where it started
    358 ha reached on 10 Aug
    10 %
  2. Rabaçal 220 inhabitants · 1.8 km from the centre
    2 ha reached on 10 Aug
    0.2 %
  3. Marialva 177 inhabitants · 3.4 km from the centre
    1 ha
    0.0 %

Burnt area inside each freguesia, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Other natural land59 %
  • Scrub and transitional woodland22 %
  • Agricultural areas19 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

People and buildings inside the perimeter

GHSL 2015
Built-up area0.25 ha
Residents< 20

Inside the perimeter there were about 0.25 hectares of built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

Official record

According to ICNF, this fire started on 9 August 2016 and burned 361 ha (the satellite measured 361 ha).

ICNF (Instituto da Conservação da Natureza e das Florestas). This is the agency’s operational record: its figures may be revised when the year’s statistics are closed.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Strong wind: 11 % of the area in Portugal

Day High Min. humidity Peak gust Rain Danger (FWI)
9 Aug 30.8 °C 28 % 52 km/h 0.0 mm Very high 40
10 Aug 27.3 °C 25 % 51 km/h 0.0 mm Extreme 54
11 Aug 28.4 °C 23 % 41 km/h 0.0 mm Very high 44
12 Aug after 30.4 °C 23 % 24 km/h 0.0 mm High 32
13 Aug after 32.1 °C 24 % 22 km/h 0.0 mm High 29
14 Aug after 32.2 °C 28 % 28 km/h 0.1 mm High 32
15 Aug after 31.3 °C 25 % 38 km/h 0.2 mm High 38
16 Aug after 29.9 °C 28 % 40 km/h 0.0 mm High 37
17 Aug after 26.9 °C 43 % 35 km/h 0.2 mm High 32
18 Aug after 28.7 °C 31 % 30 km/h 0.0 mm High 22
19 Aug after 25.2 °C 56 % 36 km/h 0.5 mm High 26
20 Aug after 25.5 °C 27 % 31 km/h 0.0 mm High 32
21 Aug after 29.6 °C 22 % 32 km/h 0.0 mm High 36

Its twins: fires that started in the same weather

It started with an FWI of 40.4, a minimum humidity of 28% and 32 days without rain. Fires in the area that started in weather like this since 2016: 61.

FWI at the start 40.4
Minimum humidity 28 %
Days without rain 32
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Fornos de Algodres fire, August 2026
311 ha 1 day FWI 38.8 Min. humidity 29 % 39 km away, in 2026

First rain (1 mm or more) after it ended: 1.0 mm on 8 Aug.

What happened to them

2 days
median duration
443 ha
median area
26 %
went past 1,000 ha
2.9 mm
rain at the end (median; 37 of 61 had it)

It burned an area similar to its twins (361 ha against a median of 443 ha) and lasted 3 days, against 2 days.

In 24 of 61, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.9 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
52km/h · max. gust

It was considered over on 11 Aug, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 37 of 61, with a median of 2.9 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 2 Aug 2016
After · 18 Aug 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 13 August 2016 the air beside the fire reached 49 µg/m³ of PM2.5. That day averaged 41: 2.7 times the WHO daily guideline (15).

PM2.5 peak49 µg/m³
Days over the guideline2 days
PM1065 µg/m³
7 Aug9 Aug11 Aug13 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 38Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Portugal

Frequently asked questions

How long did the Vale Flor, Carvalhal e Pai Penela fire last?
Copernicus dates it between 9 August 2016 and 11 August 2016: 3 days between the first and last image with fire. According to ICNF, it was detected on 9 August 2016 at 21:52 and declared extinguished on 10 August 2016.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 361 hectares (3.6 km²). Official national figures may differ.
Which freguesias burned?
The fire entered 3 freguesias: Vale Flor, Carvalhal e Pai Penela (358 ha, 10 %); Rabaçal (2 ha, 0.2 %); Marialva (1 ha, 0.0 %).
Did the fire reach a town?
The fire came within 1.8 km of the centre of Rabaçal, the closest of the areas it touched. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 30.8 °C, humidity dropped to 23 % and gusts hit 52 km/h. The fire danger index (FWI) reached 54, class Extreme.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Portugal (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 61. Their median duration was 2 days and their median area 443 ha; 26 % went past 1,000 ha. In 24 of 61, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.9 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 38 Suomi-NPP VIIRS detections on those dates.
  • Compared with ICNF: 361 official ha against 361 ha of perimeter; they agree within 25%.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Freguesia boundaries come from geoBoundaries ADM3 (CC0 1.0 Universal (CC0 1.0) Public Domain Dedication). The area per freguesia is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.