Skip to content
worldfires
AU · Australia · –

Unincorporated NT fire, 12 June 2026 Unincorporated NT, Victoria Daly

Out · last detection

The fire started on in Unincorporated NT, Australia, and satellites saw it burning for 4 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 14,060 hectares from heat detections, spread across 2 municipalities.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
14,060ha
GWIS perimeter (Copernicus)
Duration
4days
12 Jun 2026 – 15 Jun 2026
Municipalities hit
2
local government areas
Started on
12 Jun
2026
Heat detections
236
in a single hotspot: 86 MW
Danger at start
35
High · FWI index
Average daily power
841MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 12 Jun15 Jun
15 Jun 2026

How it evolved, day by day

12 Jun 2026 · 2,046 MW · 149 13 Jun 2026 · 1,291 MW · 79 14 Jun 2026 · 20 MW · 7 15 Jun 2026 · 5 MW · 1
12 Jun 13 Jun 14 Jun 15 Jun

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (9 passes) and with what wind. Watch the film

The weather it burned in

33°high
38km/h · peak gust
31%lowest humidity

It had gone 24 days without rain (1 mm or more) when it started. Rain came after the fire: 1.3 mm on 18 Jun.

This area had burned before

100% of the perimeter overlaps earlier fires recorded since 2016: 5,801 ha in 2016, 6,584 ha in 2017, 8,931 ha in 2018, 4,946 ha in 2019, 9,183 ha in 2020, 6,494 ha in 2021, 9,781 ha in 2022, 6,429 ha in 2023, 7,903 ha in 2024, 7,016 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 14,111 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 8.9% of the area of London (141 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Unincorporated NT where it started
    12,923 ha
    0.7 %
  2. 875 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.20 ha
Residents< 20

Inside the perimeter there were about 0.20 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
12 Jun 33.0 °C 38 % 35 km/h 0.0 mm High 35
13 Jun 32.3 °C 32 % 34 km/h 0.0 mm Very high 39
14 Jun 31.9 °C 33 % 37 km/h 0.0 mm Very high 40
15 Jun 31.5 °C 31 % 38 km/h 0.0 mm Very high 43
16 Jun after 31.8 °C 34 % 29 km/h 0.0 mm High 35
17 Jun after 32.2 °C 36 % 26 km/h 0.0 mm High 34
18 Jun after 30.4 °C 52 % 20 km/h 1.3 mm Moderate 14

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 5 Jun 2026
After · 22 Jun 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 20 June 2026 the air beside the fire reached 19 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak19 µg/m³
Days over the guideline0 days
PM1022 µg/m³
Optical depth0.36
3 Jun8 Jun13 Jun18 Jun23 Jun
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 236Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Unincorporated NT fire last?
GWIS (Copernicus) dates it between 12 June 2026 and 15 June 2026: 4 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 14,060 hectares (140.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Unincorporated NT (12,923 ha, 0.7 %); Victoria Daly (875 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 33.0 °C, humidity dropped to 31 % and gusts hit 38 km/h. The fire danger index (FWI) reached 43, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 236 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.