Skip to content
worldfires
AU · Australia · –

Victoria Daly fire, 1 August 2025 Unincorporated NT, Victoria Daly

Out · last detection 28 Aug 2025, 15:37 UTC

The fire started on 1 August 2025 in Victoria Daly, Australia, and satellites saw it burning for 28 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 13,336 hectares from heat detections, spread across 2 municipalities.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
13,336ha
GWIS perimeter (Copernicus)
Duration
28days
1 Aug 2025 – 28 Aug 2025
Municipalities hit
2
local government areas
Started on
1 Aug
2025
Heat detections
481
in a single hotspot: 56 MW
Danger at start
32
High · FWI index
Average daily power
100MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 1 Aug28 Aug
28 Aug 2025

How it evolved, day by day

1 Aug 2025 · 208 MW · 54 2 Aug 2025 · 159 MW · 36 3 Aug 2025 · 202 MW · 35 4 Aug 2025 · 112 MW · 19 5 Aug 2025 · 1 MW · 1 6 Aug 2025 · 26 MW · 3 7 Aug 2025 · 13 MW · 3 8 Aug 2025 · 402 MW · 42 9 Aug 2025 · 34 MW · 12 10 Aug 2025 · 25 MW · 6 11 Aug 2025 · 29 MW · 11 12 Aug 2025 · 11 MW · 3 13 Aug 2025 · 4 MW · 1 15 Aug 2025 · 76 MW · 17 16 Aug 2025 · 57 MW · 16 17 Aug 2025 · 49 MW · 14 18 Aug 2025 · 190 MW · 48 19 Aug 2025 · 510 MW · 111 20 Aug 2025 · 78 MW · 11 21 Aug 2025 · 247 MW · 21 22 Aug 2025 · 48 MW · 9 23 Aug 2025 · 15 MW · 3 24 Aug 2025 · 2 MW · 2 25 Aug 2025 · 3 MW · 1 28 Aug 2025 · 2 MW · 2
1 Aug 6 Aug 11 Aug 19 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
46km/h · peak gust
12%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

100% of the perimeter overlaps earlier fires recorded since 2016: 6,287 ha in 2016, 6,487 ha in 2017, 6,931 ha in 2018, 8,402 ha in 2019, 5,514 ha in 2020, 9,589 ha in 2021, 10,331 ha in 2022, 6,976 ha in 2023, 6,605 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 13,615 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 8.4% of the area of London (133 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. 10,274 ha
    0.5 %
  2. Victoria Daly where it started
    3,053 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.71 ha
Residents< 20

Inside the perimeter there were about 0.71 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
1 Aug 30.0 °C 28 % 44 km/h 1.9 mm High 32
2 Aug 28.0 °C 20 % 46 km/h 0.0 mm Extreme 52
3 Aug 28.4 °C 20 % 38 km/h 0.0 mm Very high 45
4 Aug 29.5 °C 21 % 25 km/h 0.0 mm Very high 39
5 Aug 30.8 °C 12 % 30 km/h 0.0 mm Extreme 51
6 Aug 31.9 °C 14 % 29 km/h 0.0 mm Extreme 52
7 Aug 32.4 °C 22 % 20 km/h 0.0 mm Very high 48
8 Aug 32.2 °C 31 % 30 km/h 0.0 mm Very high 42
9 Aug 32.2 °C 26 % 37 km/h 0.0 mm Very high 48
10 Aug 30.6 °C 20 % 40 km/h 0.0 mm Extreme 57
11 Aug 30.2 °C 16 % 35 km/h 0.0 mm Extreme 54
12 Aug 30.6 °C 21 % 27 km/h 0.0 mm Very high 44
13 Aug 32.0 °C 30 % 37 km/h 0.0 mm Very high 50
14 Aug 32.0 °C 27 % 46 km/h 0.0 mm Extreme 58
15 Aug 31.1 °C 25 % 44 km/h 0.0 mm Extreme 52
16 Aug 31.3 °C 20 % 38 km/h 0.0 mm Extreme 57
17 Aug 30.6 °C 17 % 46 km/h 0.0 mm Extreme 64
18 Aug 29.5 °C 17 % 43 km/h 0.0 mm Extreme 60
19 Aug 29.2 °C 15 % 44 km/h 0.0 mm Extreme 59
20 Aug 29.9 °C 22 % 39 km/h 0.0 mm Extreme 56
21 Aug 31.5 °C 24 % 27 km/h 0.0 mm Very high 42
22 Aug 33.3 °C 24 % 30 km/h 0.0 mm Very high 48
23 Aug 34.2 °C 21 % 37 km/h 0.0 mm Extreme 55
24 Aug 34.2 °C 19 % 30 km/h 0.0 mm Extreme 51
25 Aug 34.6 °C 22 % 25 km/h 0.0 mm Very high 42
26 Aug 34.7 °C 22 % 20 km/h 0.0 mm Very high 38
27 Aug 33.7 °C 28 % 23 km/h 0.0 mm Very high 41
28 Aug 33.7 °C 33 % 20 km/h 0.0 mm High 34
29 Aug after 34.4 °C 34 % 22 km/h 0.0 mm High 34
30 Aug after 34.8 °C 25 % 33 km/h 0.0 mm Very high 41
31 Aug after 33.1 °C 24 % 40 km/h 0.0 mm Extreme 52
1 Sept after 32.9 °C 20 % 37 km/h 0.0 mm Extreme 53
2 Sept after 32.8 °C 17 % 38 km/h 0.0 mm Extreme 55
3 Sept after 31.7 °C 16 % 28 km/h 0.0 mm Very high 48
4 Sept after 32.4 °C 23 % 23 km/h 0.0 mm Very high 45
5 Sept after 33.3 °C 35 % 26 km/h 0.0 mm Very high 41
6 Sept after 34.4 °C 39 % 31 km/h 0.0 mm Very high 41
7 Sept after 35.4 °C 36 % 31 km/h 0.1 mm Very high 42

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 25 Jul 2025
After · 4 Sept 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 19 August 2025 the air beside the fire reached 34 µg/m³ of PM2.5. That day averaged 16: 1.0 times the WHO daily guideline (15).

PM2.5 peak34 µg/m³
Days over the guideline1 day
PM1034 µg/m³
Optical depth0.53
30 Jul5 Aug11 Aug17 Aug23 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 481Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Victoria Daly fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 1 August 2025 to 28 August 2025 (28 days). The perimeter dates it from 1 August 2025 to 24 August 2025.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 13,336 hectares (133.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Unincorporated NT (10,274 ha, 0.5 %); Victoria Daly (3,053 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 34.7 °C, humidity dropped to 12 % and gusts hit 46 km/h. The fire danger index (FWI) reached 64, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 24 August 2025 → 28 August 2025.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 1 August 2025 to 24 August 2025. 481 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.