Skip to content
worldfires
AU · Australia · –

Victoria Daly fire, 3 July 2019 Victoria Daly, Unincorporated NT

Out · last detection

The fire started on in Victoria Daly, Australia, and satellites saw it burning for 34 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 58,172 hectares from heat detections, spread across 2 municipalities.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
58,172ha
GWIS perimeter (Copernicus)
Duration
34days
3 Jul 2019 – 5 Aug 2019
Municipalities hit
2
local government areas
Started on
3 Jul
2019
Heat detections
2,879
in a single hotspot: 192 MW
Danger at start
47
Very high · FWI index
Average daily power
864MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 3 Jul5 Aug
5 Aug 2019

How it evolved, day by day

3 Jul 2019 · 186 MW · 19 4 Jul 2019 · 382 MW · 59 5 Jul 2019 · 558 MW · 69 6 Jul 2019 · 1,250 MW · 145 7 Jul 2019 · 398 MW · 75 8 Jul 2019 · 416 MW · 109 9 Jul 2019 · 574 MW · 53 10 Jul 2019 · 276 MW · 47 11 Jul 2019 · 178 MW · 40 12 Jul 2019 · 12 MW · 4 13 Jul 2019 · 77 MW · 35 14 Jul 2019 · 225 MW · 36 15 Jul 2019 · 60 MW · 21 16 Jul 2019 · 106 MW · 28 17 Jul 2019 · 5 MW · 2 18 Jul 2019 · 13 MW · 4 20 Jul 2019 · 122 MW · 32 21 Jul 2019 · 1,682 MW · 76 22 Jul 2019 · 1,937 MW · 118 23 Jul 2019 · 6,843 MW · 467 24 Jul 2019 · 4,918 MW · 423 25 Jul 2019 · 862 MW · 141 26 Jul 2019 · 1,479 MW · 211 27 Jul 2019 · 830 MW · 177 28 Jul 2019 · 3,121 MW · 172 29 Jul 2019 · 387 MW · 110 30 Jul 2019 · 1,036 MW · 123 31 Jul 2019 · 454 MW · 55 1 Aug 2019 · 84 MW · 15 2 Aug 2019 · 16 MW · 4 3 Aug 2019 · 3 MW · 3 4 Aug 2019 · 2 MW · 3 5 Aug 2019 · 19 MW · 3
3 Jul 10 Jul 17 Jul 23 Jul 1 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
51km/h · peak gust
13%lowest humidity

It had gone 59 days without rain (1 mm or more) when it started.

This area had burned before

65% of the perimeter overlaps earlier fires recorded since 2016: 21,476 ha in 2016, 1,711 ha in 2017, 29,539 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 37,902 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 37% of the area of London (582 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Victoria Daly where it started
    53,978 ha
    0.4 %
  2. 4,118 ha
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.42 ha
Residents< 20

Inside the perimeter there were about 0.42 hectares of built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
3 Jul 30.1 °C 22 % 35 km/h 0.0 mm Very high 47
4 Jul 29.5 °C 18 % 36 km/h 0.0 mm Very high 48
5 Jul 29.6 °C 21 % 28 km/h 0.0 mm Very high 39
6 Jul 30.3 °C 21 % 31 km/h 0.0 mm Very high 46
7 Jul 30.3 °C 21 % 40 km/h 0.0 mm Extreme 53
8 Jul 30.5 °C 23 % 36 km/h 0.0 mm Very high 48
9 Jul 31.1 °C 30 % 34 km/h 0.0 mm Very high 45
10 Jul 30.4 °C 29 % 36 km/h 0.0 mm Extreme 50
11 Jul 30.3 °C 27 % 37 km/h 0.0 mm Very high 50
12 Jul 30.5 °C 34 % 41 km/h 0.0 mm Extreme 50
13 Jul 30.6 °C 22 % 48 km/h 0.0 mm Extreme 57
14 Jul 27.8 °C 19 % 51 km/h 0.0 mm Extreme 64
15 Jul 27.3 °C 17 % 48 km/h 0.0 mm Extreme 61
16 Jul 28.7 °C 14 % 44 km/h 0.0 mm Extreme 63
17 Jul 29.6 °C 15 % 40 km/h 0.0 mm Extreme 60
18 Jul 30.4 °C 19 % 40 km/h 0.0 mm Extreme 62
19 Jul 31.8 °C 17 % 39 km/h 0.0 mm Extreme 61
20 Jul 33.3 °C 16 % 29 km/h 0.0 mm Very high 50
21 Jul 31.9 °C 18 % 23 km/h 0.0 mm Very high 42
22 Jul 32.2 °C 19 % 30 km/h 0.0 mm High 37
23 Jul 32.4 °C 13 % 51 km/h 0.0 mm Extreme 69
24 Jul 31.3 °C 16 % 49 km/h 0.0 mm Very extreme 74
25 Jul 31.7 °C 33 % 28 km/h 0.0 mm Very high 42
26 Jul 31.1 °C 26 % 34 km/h 0.0 mm Very high 42
27 Jul 31.2 °C 27 % 31 km/h 0.0 mm Very high 40
28 Jul 32.2 °C 24 % 34 km/h 0.0 mm Very high 41
29 Jul 31.7 °C 28 % 32 km/h 0.0 mm Very high 40
30 Jul 32.0 °C 28 % 31 km/h 0.0 mm Very high 39
31 Jul 32.3 °C 24 % 44 km/h 0.0 mm Extreme 55
1 Aug 31.3 °C 21 % 51 km/h 0.0 mm Extreme 66
2 Aug 28.7 °C 14 % 45 km/h 0.0 mm Extreme 65
3 Aug 29.6 °C 19 % 40 km/h 0.0 mm Extreme 61
4 Aug 30.7 °C 28 % 46 km/h 0.0 mm Extreme 59
5 Aug 32.3 °C 26 % 30 km/h 0.0 mm Very high 46
6 Aug after 32.6 °C 27 % 28 km/h 0.0 mm Very high 45
7 Aug after 31.7 °C 34 % 22 km/h 0.0 mm High 31
8 Aug after 32.6 °C 33 % 27 km/h 0.0 mm High 33
9 Aug after 33.7 °C 27 % 28 km/h 0.0 mm High 34
10 Aug after 33.1 °C 20 % 33 km/h 0.0 mm Extreme 54
11 Aug after 31.6 °C 13 % 45 km/h 0.0 mm Very extreme 72
12 Aug after 29.2 °C 11 % 40 km/h 0.0 mm Extreme 66
13 Aug after 28.3 °C 13 % 43 km/h 0.0 mm Extreme 68
14 Aug after 30.0 °C 11 % 37 km/h 0.0 mm Extreme 63
15 Aug after 31.4 °C 30 % 22 km/h 0.0 mm High 37

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 26 Jun 2019
After · 12 Aug 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 2,879Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Victoria Daly fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 3 July 2019 to 5 August 2019 (34 days). The perimeter dates it from 5 July 2019 to 5 August 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 58,172 hectares (581.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Victoria Daly (53,978 ha, 0.4 %); Unincorporated NT (4,118 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 33.3 °C, humidity dropped to 13 % and gusts hit 51 km/h. The fire danger index (FWI) reached 74, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 5 July 2019 → 3 July 2019.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 5 July 2019 to 5 August 2019. 2,879 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.