Skip to content
worldfires
AU · Australia · –

Unincorporated NT fire, July 2024 Unincorporated NT

Out · last detection 23 Jul 2024, 04:46 UTC

The fire started on 21 July 2024 in Unincorporated NT, Australia, and satellites saw it burning for 5 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,936 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
5,936ha
GWIS perimeter (Copernicus)
Duration
5days
21 Jul 2024 – 25 Jul 2024
Municipalities hit
1
local government areas
Started on
21 Jul
2024
Heat detections
136
in a single hotspot: 147 MW
Danger at start
62
Extreme · FWI index
Average daily power
359MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 21 Jul25 Jul
23 Jul 2024

How it evolved, day by day

21 Jul 2024 · 308 MW · 73 22 Jul 2024 · 524 MW · 36 23 Jul 2024 · 245 MW · 27
21 Jul 22 Jul 23 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

31°high
43km/h · peak gust
15%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

100% of the perimeter overlaps earlier fires recorded since 2016: 3,854 ha in 2016, 3,310 ha in 2017, 3,299 ha in 2018, 2,901 ha in 2019, 5,443 ha in 2020, 1,671 ha in 2021, 765 ha in 2022, 1,445 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 5,971 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 3.7% of the area of London (59 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Unincorporated NT where it started
    5,807 ha reached on 21 Jul
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 34 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
21 Jul 30.9 °C 15 % 42 km/h 0.0 mm Extreme 62
22 Jul 30.5 °C 18 % 43 km/h 0.0 mm Extreme 63
23 Jul 31.0 °C 19 % 38 km/h 0.0 mm Extreme 55
24 Jul 30.6 °C 45 % 27 km/h 0.0 mm High 30
25 Jul 30.9 °C 49 % 24 km/h 0.2 mm High 28
26 Jul after 31.5 °C 52 % 28 km/h 0.1 mm High 30
27 Jul after 30.8 °C 55 % 20 km/h 0.1 mm High 23
28 Jul after 31.8 °C 43 % 41 km/h 0.0 mm High 38
29 Jul after 32.7 °C 34 % 44 km/h 0.0 mm Very high 44
30 Jul after 32.3 °C 39 % 43 km/h 0.0 mm Very high 43
31 Jul after 33.8 °C 29 % 44 km/h 0.0 mm Very high 48
1 Aug after 32.9 °C 32 % 36 km/h 0.0 mm Very high 43
2 Aug after 33.3 °C 26 % 40 km/h 0.0 mm Extreme 50
3 Aug after 32.3 °C 29 % 36 km/h 0.0 mm Very high 45
4 Aug after 32.4 °C 36 % 23 km/h 0.0 mm High 32

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 14 Jul 2024
After · 1 Aug 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 23 July 2024 the air beside the fire reached 38 µg/m³ of PM2.5. That day averaged 24: 1.6 times the WHO daily guideline (15).

PM2.5 peak38 µg/m³
Days over the guideline2 days
PM1055 µg/m³
Optical depth0.62
19 Jul21 Jul23 Jul25 Jul
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 136Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Unincorporated NT fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 21 July 2024 to 25 July 2024 (5 days). The perimeter dates it from 21 July 2024 to 23 July 2024.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,936 hectares (59.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Unincorporated NT (5,807 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 31.0 °C, humidity dropped to 15 % and gusts hit 43 km/h. The fire danger index (FWI) reached 63, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 23 July 2024 → 25 July 2024.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 21 July 2024 to 23 July 2024. 136 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.