Skip to content
worldfires
AU · Australia · –

Unincorporated NT fire, August 2023 Unincorporated NT, Coomalie

Out · last detection 29 Aug 2023, 04:15 UTC

The fire started on 17 August 2023 in Unincorporated NT, Australia, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 16,162 hectares from heat detections, spread across 2 municipalities.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
16,162ha
GWIS perimeter (Copernicus)
Duration
13days
17 Aug 2023 – 29 Aug 2023
Municipalities hit
2
local government areas
Started on
17 Aug
2023
Heat detections
566
in a single hotspot: 90 MW
Danger at start
33
High · FWI index
Average daily power
364MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 17 Aug29 Aug
29 Aug 2023

How it evolved, day by day

17 Aug 2023 · 56 MW · 9 18 Aug 2023 · 241 MW · 12 19 Aug 2023 · 1,041 MW · 163 20 Aug 2023 · 1,283 MW · 176 21 Aug 2023 · 650 MW · 56 22 Aug 2023 · 764 MW · 57 23 Aug 2023 · 405 MW · 31 24 Aug 2023 · 94 MW · 26 25 Aug 2023 · 20 MW · 6 26 Aug 2023 · 10 MW · 5 27 Aug 2023 · 80 MW · 13 28 Aug 2023 · 59 MW · 8 29 Aug 2023 · 24 MW · 4
17 Aug 20 Aug 23 Aug 26 Aug 29 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
55km/h · peak gust
16%lowest humidity

It had gone 46 days without rain (1 mm or more) when it started.

This area had burned before

99% of the perimeter overlaps earlier fires recorded since 2016: 13,466 ha in 2016, 1,187 ha in 2017, 6,311 ha in 2018, 14,267 ha in 2019, 938 ha in 2020, 2,387 ha in 2021, 11,505 ha in 2022. Part of it burned more than once, so the yearly figures add up to more than the 15,985 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 10% of the area of London (162 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Unincorporated NT where it started
    15,777 ha reached on 17 Aug
    0.8 %
  2. 57 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
17 Aug 31.7 °C 35 % 20 km/h 0.0 mm High 33
18 Aug 33.4 °C 30 % 29 km/h 0.0 mm High 35
19 Aug 33.4 °C 25 % 45 km/h 0.0 mm Very high 44
20 Aug 32.3 °C 16 % 44 km/h 0.0 mm Very high 49
21 Aug 31.6 °C 23 % 32 km/h 0.0 mm Very high 42
22 Aug 32.1 °C 24 % 36 km/h 0.0 mm Very high 44
23 Aug 33.5 °C 17 % 43 km/h 0.0 mm Very high 49
24 Aug 33.5 °C 18 % 42 km/h 0.0 mm Very high 49
25 Aug 33.6 °C 20 % 48 km/h 0.0 mm Extreme 50
26 Aug 33.2 °C 17 % 51 km/h 0.0 mm Extreme 55
27 Aug 33.1 °C 23 % 55 km/h 0.0 mm Extreme 58
28 Aug 33.3 °C 22 % 53 km/h 0.0 mm Extreme 55
29 Aug 33.4 °C 18 % 48 km/h 0.0 mm Extreme 51
30 Aug after 33.2 °C 18 % 35 km/h 0.0 mm Very high 45
31 Aug after 33.4 °C 21 % 32 km/h 0.0 mm Very high 43
1 Sept after 32.7 °C 19 % 37 km/h 0.0 mm Very high 46
2 Sept after 32.5 °C 20 % 34 km/h 0.0 mm Very high 45
3 Sept after 32.4 °C 24 % 25 km/h 0.0 mm Very high 42
4 Sept after 33.0 °C 25 % 29 km/h 0.0 mm Very high 41
5 Sept after 33.4 °C 28 % 29 km/h 0.0 mm Very high 41
6 Sept after 33.9 °C 24 % 26 km/h 0.0 mm Very high 40
7 Sept after 34.7 °C 23 % 27 km/h 0.0 mm Very high 41
8 Sept after 34.8 °C 28 % 32 km/h 0.0 mm Very high 42

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 10 Aug 2023
After · 5 Sept 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 21 August 2023 the air beside the fire reached 63 µg/m³ of PM2.5. That day averaged 37: 2.5 times the WHO daily guideline (15).

PM2.5 peak63 µg/m³
Days over the guideline2 days
PM1089 µg/m³
Optical depth0.55
15 Aug19 Aug23 Aug27 Aug31 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 566Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Unincorporated NT fire last?
GWIS (Copernicus) dates it between 17 August 2023 and 29 August 2023: 13 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 16,162 hectares (161.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Unincorporated NT (15,777 ha, 0.8 %); Coomalie (57 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 33.6 °C, humidity dropped to 16 % and gusts hit 55 km/h. The fire danger index (FWI) reached 58, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 566 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.