Skip to content
worldfires
AU · Australia · –

Unincorporated NT fire, 27 August 2019 Unincorporated NT, Victoria Daly, Coomalie

Out · last detection 19 Sept 2019, 04:14 UTC

The fire started on 27 August 2019 in Unincorporated NT, Australia, and satellites saw it burning for 24 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 62,990 hectares from heat detections, spread across 3 municipalities.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
62,990ha
GWIS perimeter (Copernicus)
Duration
24days
27 Aug 2019 – 19 Sept 2019
Municipalities hit
3
local government areas
Started on
27 Aug
2019
Heat detections
2,182
in a single hotspot: 181 MW
Danger at start
54
Extreme · FWI index
Average daily power
940MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 27 Aug19 Sept
19 Sept 2019

How it evolved, day by day

28 Aug 2019 · 2 MW · 2 29 Aug 2019 · 6 MW · 3 30 Aug 2019 · 45 MW · 16 31 Aug 2019 · 58 MW · 10 1 Sept 2019 · 468 MW · 44 2 Sept 2019 · 811 MW · 52 3 Sept 2019 · 922 MW · 115 4 Sept 2019 · 1,711 MW · 149 5 Sept 2019 · 528 MW · 68 6 Sept 2019 · 3,025 MW · 171 7 Sept 2019 · 1,690 MW · 133 8 Sept 2019 · 1,671 MW · 111 9 Sept 2019 · 3,528 MW · 353 10 Sept 2019 · 1,083 MW · 207 11 Sept 2019 · 1,858 MW · 158 12 Sept 2019 · 1,106 MW · 110 13 Sept 2019 · 644 MW · 81 14 Sept 2019 · 623 MW · 123 15 Sept 2019 · 600 MW · 143 16 Sept 2019 · 1,179 MW · 122 17 Sept 2019 · 27 MW · 5 18 Sept 2019 · 20 MW · 3 19 Sept 2019 · 14 MW · 3
28 Aug 2 Sept 9 Sept 17 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
53km/h · peak gust
6%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

87% of the perimeter overlaps earlier fires recorded since 2016: 33,700 ha in 2016, 14,426 ha in 2017, 37,686 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 55,011 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 40% of the area of London (630 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Unincorporated NT where it started
    61,394 ha
    3.2 %
  2. 224 ha
    0.0 %
  3. 90 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
27 Aug 33.4 °C 17 % 40 km/h 0.0 mm Extreme 54
28 Aug 34.2 °C 9 % 47 km/h 0.0 mm Very extreme 75
29 Aug 31.1 °C 8 % 46 km/h 0.0 mm Very extreme 72
30 Aug 31.4 °C 8 % 40 km/h 0.0 mm Extreme 66
31 Aug 32.6 °C 15 % 31 km/h 0.0 mm Extreme 57
1 Sept 33.3 °C 18 % 36 km/h 0.0 mm Extreme 56
2 Sept 33.4 °C 19 % 37 km/h 0.0 mm Extreme 55
3 Sept 33.6 °C 24 % 34 km/h 0.0 mm Very high 46
4 Sept 34.0 °C 21 % 37 km/h 0.0 mm Extreme 50
5 Sept 33.7 °C 30 % 31 km/h 0.0 mm High 32
6 Sept 34.6 °C 28 % 30 km/h 0.0 mm High 33
7 Sept 35.6 °C 20 % 35 km/h 0.0 mm High 38
8 Sept 36.0 °C 18 % 42 km/h 0.0 mm Extreme 57
9 Sept 35.7 °C 7 % 43 km/h 0.0 mm Very extreme 76
10 Sept 33.1 °C 6 % 52 km/h 0.0 mm Very extreme 87
11 Sept 32.9 °C 11 % 53 km/h 0.0 mm Very extreme 87
12 Sept 33.1 °C 10 % 49 km/h 0.0 mm Very extreme 83
13 Sept 33.3 °C 13 % 47 km/h 0.0 mm Very extreme 78
14 Sept 33.6 °C 19 % 52 km/h 0.0 mm Very extreme 78
15 Sept 33.2 °C 20 % 48 km/h 0.0 mm Very extreme 77
16 Sept 34.2 °C 13 % 36 km/h 0.0 mm Extreme 59
17 Sept 34.4 °C 23 % 32 km/h 0.0 mm Extreme 51
18 Sept 35.4 °C 20 % 37 km/h 0.0 mm Extreme 53
19 Sept 36.2 °C 13 % 33 km/h 0.0 mm Extreme 52
20 Sept after 34.9 °C 23 % 42 km/h 0.0 mm Very high 39
21 Sept after 33.5 °C 33 % 25 km/h 0.0 mm High 34
22 Sept after 35.6 °C 27 % 31 km/h 0.0 mm Very high 41
23 Sept after 36.2 °C 26 % 35 km/h 0.0 mm Very high 44
24 Sept after 34.4 °C 33 % 24 km/h 0.0 mm High 32
25 Sept after 35.6 °C 28 % 33 km/h 0.0 mm Very high 42
26 Sept after 35.6 °C 24 % 38 km/h 0.0 mm Very high 50
27 Sept after 36.3 °C 26 % 38 km/h 0.0 mm Very high 46
28 Sept after 35.9 °C 28 % 33 km/h 0.0 mm Very high 40
29 Sept after 37.0 °C 24 % 34 km/h 0.0 mm Very high 41

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 20 Aug 2019
After · 26 Sept 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 2,182Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Unincorporated NT fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 27 August 2019 to 19 September 2019 (24 days). The perimeter dates it from 28 August 2019 to 19 September 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 62,990 hectares (629.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Unincorporated NT (61,394 ha, 3.2 %); Victoria Daly (224 ha, 0.0 %); Coomalie (90 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 36.2 °C, humidity dropped to 6 % and gusts hit 53 km/h. The fire danger index (FWI) reached 87, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 28 August 2019 → 27 August 2019.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 28 August 2019 to 19 September 2019. 2,182 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.