Skip to content
worldfires
AU · Australia · –

Tiwi Islands fire, June 2020 Tiwi Islands

Out · last detection

The fire started on in Tiwi Islands, Australia, and satellites saw it burning for 37 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 9,853 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
9,853ha
GWIS perimeter (Copernicus)
Duration
37days
28 Jun 2020 – 3 Aug 2020
Municipalities hit
1
local government areas
Started on
28 Jun
2020
Heat detections
519
in a single hotspot: 227 MW
Danger at start
29
High · FWI index
Average daily power
114MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 28 Jun3 Aug
3 Aug 2020

How it evolved, day by day

28 Jun 2020 · 9 MW · 2 29 Jun 2020 · 2 MW · 1 30 Jun 2020 · 74 MW · 7 1 Jul 2020 · 11 MW · 3 2 Jul 2020 · 4 MW · 3 3 Jul 2020 · 109 MW · 19 4 Jul 2020 · 482 MW · 65 5 Jul 2020 · 207 MW · 37 6 Jul 2020 · 365 MW · 34 7 Jul 2020 · 142 MW · 25 8 Jul 2020 · 32 MW · 9 9 Jul 2020 · 2 MW · 2 10 Jul 2020 · 20 MW · 3 11 Jul 2020 · 32 MW · 7 12 Jul 2020 · 54 MW · 8 13 Jul 2020 · 5 MW · 5 14 Jul 2020 · 28 MW · 8 15 Jul 2020 · 24 MW · 10 16 Jul 2020 · 18 MW · 5 17 Jul 2020 · 15 MW · 3 18 Jul 2020 · 8 MW · 1 20 Jul 2020 · 90 MW · 14 21 Jul 2020 · 408 MW · 5 22 Jul 2020 · 86 MW · 11 23 Jul 2020 · 257 MW · 16 24 Jul 2020 · 196 MW · 21 25 Jul 2020 · 113 MW · 26 26 Jul 2020 · 125 MW · 22 27 Jul 2020 · 17 MW · 7 28 Jul 2020 · 314 MW · 28 29 Jul 2020 · 115 MW · 12 30 Jul 2020 · 126 MW · 22 31 Jul 2020 · 119 MW · 25 1 Aug 2020 · 114 MW · 23 2 Aug 2020 · 266 MW · 20 3 Aug 2020 · 105 MW · 10
28 Jun 4 Jul 14 Jul 23 Jul 31 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

30°high
46km/h · peak gust
26%lowest humidity

It had gone 36 days without rain (1 mm or more) when it started.

This area had burned before

98% of the perimeter overlaps earlier fires recorded since 2016: 2,534 ha in 2016, 5,534 ha in 2017, 9,114 ha in 2018, 5,860 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 9,705 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 6.2% of the area of London (99 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Tiwi Islands where it started
    10,467 ha
    1.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
28 Jun 29.4 °C 50 % 30 km/h 0.0 mm High 29
29 Jun 29.1 °C 51 % 29 km/h 0.0 mm High 26
30 Jun 28.5 °C 54 % 26 km/h 0.0 mm High 26
1 Jul 28.3 °C 49 % 19 km/h 0.0 mm Moderate 21
2 Jul 28.8 °C 56 % 26 km/h 0.0 mm High 29
3 Jul 29.2 °C 52 % 29 km/h 0.0 mm High 28
4 Jul 29.0 °C 44 % 46 km/h 0.0 mm Extreme 53
5 Jul 27.2 °C 48 % 40 km/h 0.0 mm Very high 39
6 Jul 28.1 °C 47 % 38 km/h 0.0 mm High 37
7 Jul 27.9 °C 42 % 38 km/h 0.0 mm Very high 38
8 Jul 28.5 °C 52 % 32 km/h 0.0 mm High 33
9 Jul 28.7 °C 49 % 30 km/h 0.0 mm High 32
10 Jul 29.7 °C 53 % 27 km/h 0.0 mm High 31
11 Jul 30.2 °C 52 % 29 km/h 0.0 mm High 32
12 Jul 29.9 °C 49 % 28 km/h 0.0 mm High 32
13 Jul 28.4 °C 37 % 42 km/h 0.0 mm Very high 46
14 Jul 27.7 °C 35 % 38 km/h 0.0 mm Very high 43
15 Jul 28.4 °C 52 % 25 km/h 0.0 mm High 31
16 Jul 29.0 °C 44 % 26 km/h 0.0 mm High 31
17 Jul 28.5 °C 48 % 23 km/h 0.0 mm High 28
18 Jul 28.4 °C 52 % 18 km/h 0.0 mm High 26
19 Jul 28.0 °C 58 % 29 km/h 0.0 mm High 27
20 Jul 28.2 °C 43 % 29 km/h 0.0 mm High 27
21 Jul 28.7 °C 47 % 26 km/h 0.0 mm High 26
22 Jul 28.7 °C 30 % 27 km/h 0.0 mm High 36
23 Jul 28.4 °C 36 % 20 km/h 0.0 mm High 28
24 Jul 27.9 °C 51 % 18 km/h 0.0 mm High 29
25 Jul 28.9 °C 44 % 25 km/h 0.0 mm High 32
26 Jul 28.8 °C 39 % 26 km/h 0.0 mm High 35
27 Jul 28.4 °C 38 % 31 km/h 0.0 mm Very high 38
28 Jul 28.3 °C 31 % 33 km/h 0.0 mm Very high 39
29 Jul 27.9 °C 27 % 36 km/h 0.0 mm Very high 44
30 Jul 27.6 °C 26 % 35 km/h 0.0 mm Extreme 51
31 Jul 27.8 °C 31 % 34 km/h 0.0 mm Very high 49
1 Aug 27.6 °C 41 % 31 km/h 0.0 mm Very high 40
2 Aug 27.6 °C 38 % 30 km/h 0.0 mm High 35
3 Aug 27.1 °C 57 % 24 km/h 0.0 mm High 26
4 Aug after 27.1 °C 62 % 23 km/h 0.0 mm High 25
5 Aug after 27.0 °C 60 % 21 km/h 0.0 mm High 22
6 Aug after 26.7 °C 65 % 30 km/h 0.0 mm High 26
7 Aug after 26.9 °C 60 % 32 km/h 0.0 mm High 27
8 Aug after 29.8 °C 33 % 27 km/h 0.0 mm Very high 47
9 Aug after 28.2 °C 62 % 22 km/h 0.0 mm High 26
10 Aug after 28.8 °C 54 % 26 km/h 0.0 mm High 30
11 Aug after 27.9 °C 55 % 23 km/h 0.0 mm High 23
12 Aug after 27.8 °C 64 % 24 km/h 0.0 mm Moderate 20
13 Aug after 27.3 °C 69 % 24 km/h 0.0 mm Moderate 19

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 21 Jun 2020
After · 10 Aug 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 519Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Tiwi Islands fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 28 June 2020 to 3 August 2020 (37 days). The perimeter dates it from 30 June 2020 to 3 August 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 9,853 hectares (98.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Tiwi Islands (10,467 ha, 1.4 %).
What was the weather like?
During the fire the temperature reached 30.2 °C, humidity dropped to 26 % and gusts hit 46 km/h. The fire danger index (FWI) reached 53, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 10,408 → 9,853 ha.
  2. Start date: 30 June 2020 → 28 June 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 30 June 2020 to 3 August 2020. 519 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.