Skip to content
worldfires
AU · Australia · –

Tiwi Islands fire, 5 June 2018 Tiwi Islands

Out · last detection 3 Jul 2018, 04:21 UTC

The fire started on 5 June 2018 in Tiwi Islands, Australia, and satellites saw it burning for 29 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,163 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Compare with…

Suggestions: Tiwi Islands · 2025Tiwi Islands · 2019

Burnt area
5,163ha
GWIS perimeter (Copernicus)
Duration
29days
5 Jun 2018 – 3 Jul 2018
Municipalities hit
1
local government areas
Started on
5 Jun
2018
Heat detections
310
in a single hotspot: 164 MW
Danger at start
36
High · FWI index
Average daily power
108MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 5 Jun3 Jul
3 Jul 2018

How it evolved, day by day

5 Jun 2018 · 72 MW · 6 6 Jun 2018 · 244 MW · 19 7 Jun 2018 · 88 MW · 9 8 Jun 2018 · 0 MW · 1 9 Jun 2018 · 19 MW · 5 11 Jun 2018 · 28 MW · 2 12 Jun 2018 · 4 MW · 1 13 Jun 2018 · 9 MW · 2 14 Jun 2018 · 13 MW · 3 15 Jun 2018 · 19 MW · 2 16 Jun 2018 · 322 MW · 21 17 Jun 2018 · 866 MW · 36 18 Jun 2018 · 105 MW · 14 19 Jun 2018 · 120 MW · 16 20 Jun 2018 · 293 MW · 34 21 Jun 2018 · 220 MW · 30 22 Jun 2018 · 183 MW · 34 23 Jun 2018 · 80 MW · 15 24 Jun 2018 · 8 MW · 6 25 Jun 2018 · 98 MW · 13 26 Jun 2018 · 36 MW · 7 27 Jun 2018 · 54 MW · 6 28 Jun 2018 · 60 MW · 9 29 Jun 2018 · 3 MW · 4 30 Jun 2018 · 33 MW · 8 1 Jul 2018 · 5 MW · 2 2 Jul 2018 · 14 MW · 3 3 Jul 2018 · 18 MW · 2
5 Jun 12 Jun 17 Jun 24 Jun 30 Jun

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

29°high
45km/h · peak gust
32%lowest humidity

It had gone 32 days without rain (1 mm or more) when it started.

This area had burned before

81% of the perimeter overlaps earlier fires recorded since 2016: 2,091 ha in 2016, 3,324 ha in 2017. Part of it burned more than once, so the yearly figures add up to more than the 4,177 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 3.3% of the area of London (52 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Tiwi Islands where it started
    5,159 ha
    0.7 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
5 Jun 27.6 °C 32 % 34 km/h 0.0 mm High 36
6 Jun 26.8 °C 51 % 28 km/h 0.0 mm High 28
7 Jun 28.3 °C 48 % 32 km/h 0.0 mm High 27
8 Jun 28.0 °C 59 % 30 km/h 0.0 mm High 25
9 Jun 28.5 °C 61 % 26 km/h 0.0 mm High 24
10 Jun 28.8 °C 54 % 26 km/h 0.0 mm High 23
11 Jun 27.7 °C 64 % 26 km/h 0.0 mm High 22
12 Jun 28.4 °C 63 % 26 km/h 0.0 mm High 23
13 Jun 27.9 °C 61 % 16 km/h 0.0 mm Moderate 18
14 Jun 28.3 °C 62 % 22 km/h 0.2 mm Moderate 21
15 Jun 28.8 °C 48 % 31 km/h 0.0 mm High 28
16 Jun 28.4 °C 52 % 41 km/h 0.0 mm High 35
17 Jun 28.4 °C 41 % 42 km/h 0.0 mm Very high 40
18 Jun 28.2 °C 47 % 38 km/h 0.0 mm High 34
19 Jun 28.4 °C 50 % 32 km/h 0.0 mm High 34
20 Jun 29.1 °C 51 % 28 km/h 0.0 mm High 30
21 Jun 29.2 °C 38 % 27 km/h 0.0 mm High 31
22 Jun 28.5 °C 34 % 33 km/h 0.0 mm High 38
23 Jun 28.0 °C 41 % 30 km/h 0.0 mm High 34
24 Jun 28.1 °C 50 % 28 km/h 0.0 mm High 32
25 Jun 28.7 °C 50 % 28 km/h 0.0 mm High 31
26 Jun 28.6 °C 55 % 31 km/h 0.0 mm High 32
27 Jun 28.4 °C 52 % 38 km/h 0.0 mm High 37
28 Jun 27.9 °C 47 % 38 km/h 0.0 mm Very high 40
29 Jun 28.5 °C 51 % 24 km/h 0.0 mm High 28
30 Jun 29.4 °C 54 % 23 km/h 0.0 mm High 26
1 Jul 28.9 °C 56 % 42 km/h 0.0 mm Very high 47
2 Jul 29.2 °C 53 % 42 km/h 0.0 mm Very high 47
3 Jul 29.1 °C 51 % 45 km/h 0.0 mm Very high 46
4 Jul after 29.3 °C 37 % 32 km/h 0.0 mm Very high 41
5 Jul after 28.7 °C 47 % 27 km/h 0.0 mm High 34
6 Jul after 28.6 °C 53 % 19 km/h 0.0 mm High 25
7 Jul after 28.9 °C 44 % 20 km/h 0.0 mm High 24
8 Jul after 27.3 °C 36 % 38 km/h 0.0 mm Very high 40
9 Jul after 27.2 °C 52 % 37 km/h 0.0 mm Very high 39
10 Jul after 27.9 °C 52 % 34 km/h 0.0 mm High 38
11 Jul after 28.5 °C 38 % 27 km/h 0.0 mm High 35
12 Jul after 27.8 °C 48 % 28 km/h 0.0 mm High 29
13 Jul after 27.4 °C 54 % 20 km/h 0.0 mm High 26

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 29 May 2018
After · 10 Jul 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 310Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Tiwi Islands fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 5 June 2018 to 3 July 2018 (29 days). The perimeter dates it from 9 June 2018 to 26 June 2018.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,163 hectares (51.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Tiwi Islands (5,159 ha, 0.7 %).
What was the weather like?
During the fire the temperature reached 29.4 °C, humidity dropped to 32 % and gusts hit 45 km/h. The fire danger index (FWI) reached 47, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 26 June 2018 → 3 July 2018.
  2. Start date: 9 June 2018 → 5 June 2018.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 9 June 2018 to 26 June 2018. 310 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.