Skip to content
worldfires
AU · Australia · –

Tiwi Islands fire, August 2020 Tiwi Islands

Out · last detection

The fire started on in Tiwi Islands, Australia, and satellites saw it burning for 36 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 31,405 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
31,405ha
GWIS perimeter (Copernicus)
Duration
36days
17 Aug 2020 – 21 Sept 2020
Municipalities hit
1
local government areas
Started on
17 Aug
2020
Heat detections
1,361
in a single hotspot: 156 MW
Danger at start
28
High · FWI index
Average daily power
425MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 17 Aug21 Sept
19 Sept 2020

How it evolved, day by day

17 Aug 2020 · 18 MW · 6 18 Aug 2020 · 10 MW · 2 19 Aug 2020 · 19 MW · 3 20 Aug 2020 · 34 MW · 9 21 Aug 2020 · 45 MW · 6 22 Aug 2020 · 73 MW · 13 23 Aug 2020 · 316 MW · 24 24 Aug 2020 · 1,122 MW · 50 25 Aug 2020 · 722 MW · 90 26 Aug 2020 · 561 MW · 77 27 Aug 2020 · 1,299 MW · 139 28 Aug 2020 · 2,650 MW · 142 29 Aug 2020 · 572 MW · 73 30 Aug 2020 · 475 MW · 70 31 Aug 2020 · 84 MW · 18 1 Sept 2020 · 121 MW · 26 2 Sept 2020 · 226 MW · 43 3 Sept 2020 · 389 MW · 50 4 Sept 2020 · 396 MW · 39 5 Sept 2020 · 751 MW · 60 6 Sept 2020 · 412 MW · 63 7 Sept 2020 · 307 MW · 43 8 Sept 2020 · 895 MW · 70 9 Sept 2020 · 993 MW · 57 10 Sept 2020 · 195 MW · 27 11 Sept 2020 · 82 MW · 14 12 Sept 2020 · 98 MW · 32 13 Sept 2020 · 155 MW · 27 14 Sept 2020 · 666 MW · 40 15 Sept 2020 · 185 MW · 29 16 Sept 2020 · 148 MW · 13 18 Sept 2020 · 23 MW · 5 19 Sept 2020 · 2 MW · 1
17 Aug 28 Aug 7 Sept 14 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high
50km/h · peak gust
23%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 13.0 mm on 26 Sept.

This area had burned before

94% of the perimeter overlaps earlier fires recorded since 2016: 5,422 ha in 2016, 18,060 ha in 2017, 12,521 ha in 2018, 23,763 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 29,477 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 20% of the area of London (314 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Tiwi Islands where it started
    31,578 ha
    4.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
17 Aug 30.2 °C 48 % 27 km/h 0.2 mm High 28
18 Aug 29.3 °C 52 % 26 km/h 0.0 mm High 22
19 Aug 29.1 °C 58 % 23 km/h 0.0 mm High 22
20 Aug 30.0 °C 59 % 27 km/h 0.0 mm High 22
21 Aug 30.6 °C 50 % 30 km/h 0.0 mm High 25
22 Aug 30.2 °C 50 % 28 km/h 0.0 mm High 26
23 Aug 30.9 °C 27 % 37 km/h 0.0 mm Very high 47
24 Aug 30.3 °C 24 % 38 km/h 0.0 mm Extreme 56
25 Aug 30.0 °C 23 % 44 km/h 0.0 mm Extreme 67
26 Aug 30.1 °C 35 % 43 km/h 0.0 mm Extreme 59
27 Aug 30.6 °C 32 % 46 km/h 0.0 mm Extreme 62
28 Aug 30.4 °C 31 % 47 km/h 0.0 mm Extreme 61
29 Aug 29.2 °C 36 % 41 km/h 0.0 mm Very high 48
30 Aug 31.1 °C 41 % 30 km/h 0.0 mm Very high 45
31 Aug 30.3 °C 57 % 50 km/h 0.0 mm Very high 41
1 Sept 30.8 °C 50 % 36 km/h 0.0 mm High 38
2 Sept 30.8 °C 51 % 33 km/h 0.0 mm High 31
3 Sept 30.5 °C 52 % 32 km/h 0.0 mm High 34
4 Sept 31.5 °C 41 % 27 km/h 0.0 mm High 30
5 Sept 31.3 °C 38 % 32 km/h 0.0 mm High 36
6 Sept 30.9 °C 37 % 37 km/h 0.0 mm Very high 45
7 Sept 31.0 °C 34 % 35 km/h 0.0 mm Very high 49
8 Sept 31.3 °C 39 % 35 km/h 0.0 mm Very high 50
9 Sept 31.4 °C 32 % 36 km/h 0.0 mm Extreme 51
10 Sept 31.1 °C 32 % 32 km/h 0.0 mm Very high 41
11 Sept 31.1 °C 38 % 35 km/h 0.0 mm Very high 42
12 Sept 30.8 °C 29 % 31 km/h 0.0 mm Very high 42
13 Sept 30.3 °C 42 % 32 km/h 0.0 mm Very high 38
14 Sept 30.6 °C 33 % 36 km/h 0.2 mm Very high 48
15 Sept 30.5 °C 43 % 39 km/h 0.0 mm Extreme 52
16 Sept 30.8 °C 44 % 33 km/h 0.0 mm Very high 41
17 Sept 29.9 °C 60 % 28 km/h 0.0 mm High 31
18 Sept 30.0 °C 62 % 26 km/h 0.0 mm High 28
19 Sept 29.3 °C 70 % 30 km/h 4.0 mm Low 7
20 Sept 30.1 °C 66 % 34 km/h 1.2 mm Moderate 12
21 Sept 31.2 °C 60 % 26 km/h 0.1 mm Moderate 15
22 Sept after 31.3 °C 57 % 31 km/h 0.0 mm High 23
23 Sept after 31.8 °C 51 % 31 km/h 0.0 mm High 23
24 Sept after 30.6 °C 56 % 31 km/h 0.0 mm High 25
25 Sept after 30.6 °C 62 % 28 km/h 0.2 mm High 22
26 Sept after 29.9 °C 63 % 29 km/h 13.0 mm Moderate 21

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 10 Aug 2020
After · 28 Sept 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 1,361Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Tiwi Islands fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 17 August 2020 to 21 September 2020 (36 days). The perimeter dates it from 17 August 2020 to 16 September 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 31,405 hectares (314.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Tiwi Islands (31,578 ha, 4.2 %).
What was the weather like?
During the fire the temperature reached 31.5 °C, humidity dropped to 23 % and gusts hit 50 km/h. The fire danger index (FWI) reached 67, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 16 September 2020 → 21 September 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 17 August 2020 to 16 September 2020. 1,361 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.