How long did the Taboose fire last?

It burned between 5 September 2019 and 5 September 2019: 1 day, according to the start date recorded by United States agencies (MTBS / NIFC) and the heat detections seen by satellite.

How much area did it burn?

The official perimeter published by United States agencies (MTBS / NIFC) is 4,206 hectares (42.1 km²). Other tallies, such as daily incident reports, may give slightly different figures.

Which counties burned?

The fire only entered Inyo (4,230 ha, 0.2 %).

What was the weather like?

During the fire the temperature reached 27.8 °C, humidity dropped to 7 % and gusts hit 58 km/h. The fire danger index (FWI) reached 45, class Very high.

Where does this data come from?

From the official burnt perimeter of United States agencies (MTBS / NIFC, public domain), NASA FIRMS VIIRS hotspots and the administrative boundaries of United States. It is not an official report.

US · United States · 2019-09-05 → 2019-09-05

Taboose Fire, September 2019 Inyo

Out · last detection 5 Sept 2019, 09:25 UTC

The fire started on 5 September 2019 in Inyo, United States, and satellites saw it burning for 1 day. United States agencies (MTBS / NIFC) mapped an official burnt perimeter of 4,206 hectares, spread across a single county.

It is the 142th largest in California since 2016 (of 442 with a page). Number 62 in United States in 2019, of 367.

Burnt area: 4,206ha; official perimeter (MTBS / NIFC)
Duration: 1day; 5 Sept 2019 – 5 Sept 2019
Municipalities hit: 1; counties
Started on: 5 Sept; 2019
Heat detections: 413; in a single hotspot: 953 MW
Danger at start: 8; Low · FWI index
Energy released: 57MW; sum of detected power

HOTSPOTS BY DAY 5 Sept5 Sept

How it evolved, day by day

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

28°high

58km/h · peak gust

7%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

What happened to each town

Inyo where it started

4,230 ha reached on 5 Sept

0.2 %

Burnt area inside each county, from crossing the official perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day	High	Min. humidity	Peak gust	Rain	Danger (FWI)
5 Sept	24.2 °C	35 %	41 km/h	1.9 mm	Low 8
6 Sept after	25.9 °C	27 %	20 km/h	0.0 mm	Moderate 18
7 Sept after	26.8 °C	21 %	35 km/h	0.0 mm	High 27
8 Sept after	24.3 °C	10 %	35 km/h	0.0 mm	High 34
9 Sept after	24.6 °C	7 %	40 km/h	0.0 mm	High 38
10 Sept after	21.5 °C	7 %	41 km/h	0.0 mm	Very high 40
11 Sept after	21.2 °C	14 %	27 km/h	0.0 mm	High 35
12 Sept after	24.2 °C	9 %	25 km/h	0.0 mm	High 35
13 Sept after	26.7 °C	12 %	22 km/h	0.0 mm	High 36
14 Sept after	27.8 °C	10 %	25 km/h	0.0 mm	High 36
15 Sept after	25.7 °C	7 %	32 km/h	0.0 mm	Very high 39
16 Sept after	19.7 °C	7 %	58 km/h	0.0 mm	Very high 45
17 Sept after	20.3 °C	17 %	28 km/h	0.0 mm	High 36
18 Sept after	22.7 °C	15 %	43 km/h	0.0 mm	High 37
19 Sept after	16.4 °C	11 %	32 km/h	0.1 mm	High 38
20 Sept after	18.0 °C	21 %	27 km/h	0.0 mm	High 32
21 Sept after	20.3 °C	17 %	26 km/h	0.0 mm	High 32
22 Sept after	22.7 °C	13 %	32 km/h	0.0 mm	High 33
23 Sept after	19.1 °C	23 %	41 km/h	0.0 mm	High 34
24 Sept after	23.7 °C	14 %	41 km/h	0.0 mm	High 35
25 Sept after	25.2 °C	20 %	31 km/h	0.0 mm	High 34
26 Sept after	24.2 °C	23 %	25 km/h	0.0 mm	High 33
27 Sept after	24.5 °C	15 %	35 km/h	0.0 mm	High 34
28 Sept after	17.2 °C	23 %	50 km/h	0.0 mm	High 35
29 Sept after	12.1 °C	13 %	37 km/h	0.0 mm	High 31

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

↔

Before · 29 Aug 2019

After · 12 Sept 2019

Before After

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 413Every satellite heat detection, one by one, with time, satellite, power and coordinates.

⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.

Date and time	Satellite	FRP (MW)	Lat	Lon

Other fires nearby

All fires in United States ›

Frequently asked questions

How long did the Taboose fire last?: It burned between 5 September 2019 and 5 September 2019: 1 day, according to the start date recorded by United States agencies (MTBS / NIFC) and the heat detections seen by satellite.
How much area did it burn?: The official perimeter published by United States agencies (MTBS / NIFC) is 4,206 hectares (42.1 km²). Other tallies, such as daily incident reports, may give slightly different figures.
Which counties burned?: The fire only entered Inyo (4,230 ha, 0.2 %).
What was the weather like?: During the fire the temperature reached 27.8 °C, humidity dropped to 7 % and gusts hit 58 km/h. The fire danger index (FWI) reached 45, class Very high.
Where does this data come from?: From the official burnt perimeter of United States agencies (MTBS / NIFC, public domain), NASA FIRMS VIIRS hotspots and the administrative boundaries of United States. It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911

Satellite cross-check

NASA FIRMS ↗
NIFC · Fire maps ↗

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error

What do you think is wrong?

Dates or duration Place or towns Burned area Name It was not a wildfire Same fire as another page Something else

What really happened?

Your connection to the fire (optional) Email (optional)

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

Where this data comes from

The perimeter is official and in the public domain. For past years it comes from MTBS (Monitoring Trends in Burn Severity), run by the U.S. Geological Survey and the USDA Forest Service, which map it on Landsat and Sentinel-2 imagery. For the current and last year it comes from WFIGS at the National Interagency Fire Center (NIFC): incident perimeters mapped by fire crews, aircraft and imagery. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. County boundaries come from geoBoundaries ADM2 (Public Domain). The area per county is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.

Where it burned