Skip to content
worldfires
ES · Spain · –

Sierra de Mijas fire, July 2022 Alhaurín el Grande, Alhaurín de la Torre, Mijas

Out · last detection 17 Jul 2022, 02:26 UTC

The fire started on 15 July 2022 in Alhaurín el Grande, Spain, and satellites saw it burning for 3 days. Copernicus mapped a burnt perimeter of 1,944 hectares from satellite imagery, spread across 3 municipalities. According to EGIF (MITECO), it was detected on 15 July 2022 at 12:27 and declared extinguished on 3 August 2022.

It is the 3th largest in Malaga since 2016 (of 16 with a page). Number 28 in Spain in 2022, of 196.

Burnt area
1,944ha
Copernicus perimeter
Duration
3days
15 Jul 2022 – 17 Jul 2022
Municipalities hit
3
municipalities
Started on
15 Jul
2022
Heat detections
214
in a single hotspot: 217 MW
Danger at start
38
Very high · FWI index
Average daily power
3.0GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 15 Jul17 Jul
17 Jul 2022

How it evolved, day by day

15 Jul 2022 · 7,166 MW · 102 16 Jul 2022 · 1,681 MW · 101 17 Jul 2022 · 28 MW · 11
15 Jul 16 Jul 17 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

28°high
39km/h · peak gust
29%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 1.2% of the area of London (19 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Alhaurín el Grande 27,552 inhabitants · 1.0 km from the centre where it started
    802 ha reached on 15 Jul
    11 %
  2. Alhaurín de la Torre 45,066 inhabitants · 4.2 km from the centre
    786 ha reached on 15 Jul
    9.5 %
  3. Mijas 95,104 inhabitants · 1.8 km from the centre
    360 ha reached on 15 Jul
    2.4 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Coniferous forest51 %
  • Sclerophyllous scrub34 %
  • Scrub and transitional woodland5.7 %
  • Mixed forest5.1 %
  • Agricultural areas2.1 %
  • Broadleaved forest1.3 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.68 ha
Residents≈ 30

Inside the perimeter there were about 0.68 hectares of built-up land and about 30 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

Official record

According to EGIF (MITECO), this fire started on 15 July 2022 and burned 1,862 ha (the satellite measured 1,944 ha).

MITECO, Estadística General de Incendios Forestales (EGIF). This is the agency’s consolidated statistic: it measures the area in its own way, which is why it can differ from the satellite.

Checked against the press

Checked on 30 September 2026

We checked this page against 3 sources published once the fire was out. This is what they add:

Also known as
Incendio de Mijas · Incendio de Alhaurín el Grande · Incendio de El Higuerón
Declared extinguished: 3 August 2022

Sources

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 5.1 % of the area in Spain

Day High Min. humidity Peak gust Rain Danger (FWI)
15 Jul 27.7 °C 33 % 39 km/h 0.0 mm Very high 38
16 Jul 28.3 °C 29 % 34 km/h 0.0 mm Very high 40
17 Jul 27.9 °C 35 % 34 km/h 0.0 mm Very high 39
18 Jul after 27.9 °C 38 % 30 km/h 0.0 mm High 34
19 Jul after 28.3 °C 33 % 24 km/h 0.0 mm High 31
20 Jul after 28.4 °C 37 % 26 km/h 0.0 mm High 31
21 Jul after 26.8 °C 54 % 32 km/h 0.0 mm High 27
22 Jul after 29.2 °C 37 % 26 km/h 0.0 mm High 27
23 Jul after 30.7 °C 33 % 23 km/h 0.0 mm High 29
24 Jul after 30.6 °C 38 % 23 km/h 0.0 mm High 28
25 Jul after 33.9 °C 20 % 22 km/h 0.0 mm High 36
26 Jul after 33.9 °C 14 % 28 km/h 0.0 mm Very high 44
27 Jul after 28.9 °C 34 % 37 km/h 0.0 mm Very high 43

Its twins: fires that started in the same weather

It started with an FWI of 38.3, a minimum humidity of 33% and more than two months without rain. Fires in the area that started in weather like this since 2016: 15.

FWI at the start 38.3
Minimum humidity 33 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Almogía fire, August 2020
113 ha 1 day FWI 34.3 Min. humidity 35 % 19 km away, in 2020

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

2 days
median duration
193 ha
median area
20 %
went past 1,000 ha
3.1 mm
rain at the end (median; 1 of 15 had it)

It was 10.1 times larger than the median of its twins and lasted 3 days, against 2 days.

Only 1 of its 15 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 14 of 15, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.1 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
39km/h · max. gust

It was considered over on 17 Jul, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 1 of 15, with a median of 3.1 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 8 Jul 2022
After · 24 Jul 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 20 July 2022 the air beside the fire reached 20 µg/m³ of PM2.5. That day averaged 16: 1.1 times the WHO daily guideline (15).

PM2.5 peak20 µg/m³
Days over the guideline1 day
PM1033 µg/m³
13 Jul15 Jul17 Jul19 Jul
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 214Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Spain

Frequently asked questions

How long did the Sierra de Mijas fire last?
Copernicus dates it between 15 July 2022 and 17 July 2022: 3 days between the first and last image with fire. According to EGIF (MITECO), it was detected on 15 July 2022 at 12:27 and declared extinguished on 3 August 2022.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 1,944 hectares (19.4 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Alhaurín el Grande (802 ha, 11 %); Alhaurín de la Torre (786 ha, 9.5 %); Mijas (360 ha, 2.4 %).
Did the fire reach a town?
The fire started in Alhaurín el Grande and came within 1.0 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 28.3 °C, humidity dropped to 29 % and gusts hit 39 km/h. The fire danger index (FWI) reached 40, class Very high.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Spain (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 15. Their median duration was 2 days and their median area 193 ha; 20 % went past 1,000 ha. Only 1 of its 15 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 14 of 15, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.1 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 214 Suomi-NPP VIIRS detections on those dates.
  • Compared with EGIF (MITECO): 1,862 official ha against 1,944 ha of perimeter; they agree within 25%.
  • Checked against news and agencies: 3 confirmed sources.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.