Skip to content
worldfires
BO · Bolivia · –

Santa Ana fire, 30 October 2023 Santa Ana

Out · last detection 23 Nov 2023, 17:34 UTC

The fire started on 30 October 2023 in Santa Ana, Bolivia, and satellites saw it burning for 25 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 10,051 hectares from heat detections, spread across a single municipality.

It is the 149th largest in Beni since 2016 (of 858 with a page). Number 51 in Bolivia in 2023, of 247.

Burnt area
10,051ha
GWIS perimeter (Copernicus)
Duration
25days
30 Oct 2023 – 23 Nov 2023
Municipalities hit
1
municipalities
Started on
30 Oct
2023
Heat detections
1,060
in a single hotspot: 270 MW
Danger at start
23
High · FWI index
Average daily power
686MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 30 Oct23 Nov
23 Nov 2023

How it evolved, day by day

30 Oct 2023 · 55 MW · 5 2 Nov 2023 · 64 MW · 9 3 Nov 2023 · 83 MW · 12 5 Nov 2023 · 23 MW · 4 6 Nov 2023 · 65 MW · 9 8 Nov 2023 · 40 MW · 4 9 Nov 2023 · 131 MW · 26 10 Nov 2023 · 213 MW · 22 11 Nov 2023 · 592 MW · 52 12 Nov 2023 · 1,387 MW · 51 13 Nov 2023 · 583 MW · 62 14 Nov 2023 · 778 MW · 40 15 Nov 2023 · 1,040 MW · 84 16 Nov 2023 · 3,273 MW · 212 17 Nov 2023 · 3,263 MW · 209 18 Nov 2023 · 2,156 MW · 145 19 Nov 2023 · 91 MW · 15 20 Nov 2023 · 208 MW · 48 21 Nov 2023 · 77 MW · 13 22 Nov 2023 · 105 MW · 23 23 Nov 2023 · 166 MW · 15
30 Oct 8 Nov 16 Nov 23 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

41°high
66km/h · peak gust
28%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 105.3 mm on 24 Nov.

This area had burned before

21% of the perimeter overlaps earlier fires recorded since 2016: 1,687 ha in 2019, 1,093 ha in 2022. Part of it burned more than once, so the yearly figures add up to more than the 2,084 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 6.3% of the area of London (101 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Santa Ana 18,088 inhabitants where it started
    10,093 ha
    0.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Strong wind: 9.5 % of the area in Bolivia

Day High Min. humidity Peak gust Rain Danger (FWI)
30 Oct 35.5 °C 47 % 66 km/h 0.2 mm High 23
31 Oct 31.7 °C 67 % 43 km/h 22.9 mm Very low 3
1 Nov 33.8 °C 51 % 43 km/h 5.7 mm Very low 2
2 Nov 36.3 °C 41 % 51 km/h 0.0 mm Very low 5
3 Nov 37.5 °C 38 % 36 km/h 1.8 mm Moderate 13
4 Nov 25.4 °C 51 % 35 km/h 13.3 mm Very low 1
5 Nov 34.0 °C 42 % 29 km/h 0.0 mm Very low 2
6 Nov 37.4 °C 40 % 22 km/h 0.1 mm Low 7
7 Nov 37.9 °C 39 % 26 km/h 0.0 mm Moderate 12
8 Nov 37.5 °C 45 % 36 km/h 0.1 mm Moderate 17
9 Nov 37.3 °C 42 % 34 km/h 0.1 mm Moderate 16
10 Nov 38.6 °C 37 % 36 km/h 0.1 mm Moderate 20
11 Nov 40.3 °C 30 % 44 km/h 0.1 mm High 28
12 Nov 39.5 °C 31 % 52 km/h 0.0 mm High 32
13 Nov 39.6 °C 34 % 48 km/h 0.8 mm High 30
14 Nov 38.6 °C 37 % 44 km/h 2.1 mm High 24
15 Nov 39.2 °C 33 % 49 km/h 0.3 mm High 26
16 Nov 39.0 °C 36 % 58 km/h 0.2 mm High 30
17 Nov 40.8 °C 28 % 58 km/h 0.0 mm Very high 44
18 Nov 41.3 °C 28 % 60 km/h 0.0 mm Very high 50
19 Nov 38.3 °C 34 % 47 km/h 3.1 mm High 38
20 Nov 30.7 °C 66 % 34 km/h 24.9 mm Very low 0
21 Nov 32.6 °C 57 % 50 km/h 7.5 mm Very low 2
22 Nov 34.7 °C 49 % 54 km/h 0.6 mm Very low 3
23 Nov 36.6 °C 44 % 50 km/h 10.3 mm Low 9
24 Nov after 27.8 °C 82 % 28 km/h 105.3 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 23.3, a minimum humidity of 47% and rain the day before. Fires in the area that started in weather like this since 2016: 41.

FWI at the start 23.3
Minimum humidity 47 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

San Javier fire, September 2021
10,026 ha 22 days FWI 23.1 Min. humidity 47 % 226 km away, in 2021

First rain (1 mm or more) after it ended: 19.5 mm on 15 Oct.

What happened to them

7 days
median duration
4,679 ha
median area
7 %
went past 10,000 ha
4.5 mm
rain at the end (median; 39 of 41 had it)

It was 2.1 times larger than the median of its twins and lasted 25 days, against 7 days.

Only 2 of its 41 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 2 of 41, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.5 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

105.3 mmfirst rain
24 Novthe day after it ended
66km/h · max. gust

It was considered over on 23 Nov, and on 24 Nov 105.3 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 39 of 41, with a median of 4.5 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 23 Oct 2023
After · 30 Nov 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 20 November 2023 the air beside the fire reached 77 µg/m³ of PM2.5. That day averaged 44: 3.0 times the WHO daily guideline (15).

PM2.5 peak77 µg/m³
Days over the guideline15 days
PM10109 µg/m³
Optical depth1.34
28 Oct3 Nov9 Nov15 Nov21 Nov
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1,060Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the Santa Ana fire last?
GWIS (Copernicus) dates it between 30 October 2023 and 23 November 2023: 25 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 10,051 hectares (100.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Santa Ana (10,093 ha, 0.5 %).
What was the weather like?
During the fire the temperature reached 41.3 °C, humidity dropped to 28 % and gusts hit 66 km/h. The fire danger index (FWI) reached 50, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 41. Their median duration was 7 days and their median area 4,679 ha; 7 % went past 10,000 ha. Only 2 of its 41 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 2 of 41, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.5 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 1,060 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.