Skip to content
worldfires
BO · Bolivia · –

Santa Ana fire, 22 October 2019 Santa Ana

Out · last detection 13 Nov 2019, 17:14 UTC

The fire started on 22 October 2019 in Santa Ana, Bolivia, and satellites saw it burning for 23 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 8,193 hectares from heat detections, spread across a single municipality.

It is the 208th largest in Beni since 2016 (of 858 with a page). Number 67 in Bolivia in 2019, of 218.

Burnt area
8,193ha
GWIS perimeter (Copernicus)
Duration
23days
22 Oct 2019 – 13 Nov 2019
Municipalities hit
1
municipalities
Started on
22 Oct
2019
Heat detections
408
in a single hotspot: 136 MW
Danger at start
0
Very low · FWI index
Average daily power
289MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 22 Oct13 Nov
13 Nov 2019

How it evolved, day by day

22 Oct 2019 · 14 MW · 1 24 Oct 2019 · 7 MW · 1 25 Oct 2019 · 24 MW · 5 26 Oct 2019 · 98 MW · 10 29 Oct 2019 · 799 MW · 79 30 Oct 2019 · 1,084 MW · 66 31 Oct 2019 · 764 MW · 49 2 Nov 2019 · 723 MW · 58 3 Nov 2019 · 312 MW · 34 4 Nov 2019 · 118 MW · 20 5 Nov 2019 · 339 MW · 32 6 Nov 2019 · 395 MW · 14 7 Nov 2019 · 34 MW · 13 8 Nov 2019 · 70 MW · 5 9 Nov 2019 · 5 MW · 4 12 Nov 2019 · 87 MW · 11 13 Nov 2019 · 44 MW · 6
22 Oct 30 Oct 3 Nov 7 Nov 13 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
52km/h · peak gust
41%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 33.5 mm on 14 Nov.

This area had burned before

28% of the perimeter overlaps earlier fires recorded since 2016: 2,325 ha in 2018.

How big is it?

10 km
It burned the equivalent of 5.2% of the area of London (82 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Santa Ana 18,088 inhabitants where it started
    8,235 ha
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
22 Oct 30.7 °C 59 % 27 km/h 18.5 mm Very low 0
23 Oct 33.0 °C 54 % 19 km/h 0.2 mm Very low 0
24 Oct 35.6 °C 52 % 21 km/h 0.0 mm Very low 3
25 Oct 35.3 °C 52 % 26 km/h 0.6 mm Low 6
26 Oct 34.7 °C 54 % 29 km/h 1.2 mm Low 8
27 Oct 35.8 °C 50 % 36 km/h 0.7 mm Low 7
28 Oct 36.5 °C 46 % 43 km/h 0.2 mm Low 11
29 Oct 36.9 °C 48 % 46 km/h 0.2 mm Moderate 12
30 Oct 36.8 °C 45 % 46 km/h 0.1 mm Moderate 15
31 Oct 37.5 °C 41 % 27 km/h 0.0 mm Moderate 14
1 Nov 32.5 °C 58 % 26 km/h 10.2 mm Very low 1
2 Nov 33.0 °C 54 % 27 km/h 0.5 mm Very low 3
3 Nov 35.7 °C 41 % 34 km/h 0.2 mm Low 10
4 Nov 36.1 °C 47 % 52 km/h 1.5 mm Moderate 14
5 Nov 36.6 °C 43 % 49 km/h 0.7 mm Moderate 13
6 Nov 34.3 °C 46 % 30 km/h 2.7 mm Low 8
7 Nov 29.8 °C 72 % 36 km/h 12.7 mm Very low 0
8 Nov 32.9 °C 56 % 29 km/h 3.6 mm Very low 0
9 Nov 34.7 °C 50 % 32 km/h 7.6 mm Very low 2
10 Nov 31.6 °C 66 % 28 km/h 41.5 mm Very low 0
11 Nov 29.5 °C 75 % 23 km/h 12.4 mm Very low 0
12 Nov 32.9 °C 57 % 20 km/h 2.8 mm Very low 0
13 Nov 34.5 °C 58 % 37 km/h 1.4 mm Very low 1
14 Nov after 30.0 °C 75 % 35 km/h 33.5 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 0.0, a minimum humidity of 59% and rain the day before. Fires in the area that started in weather like this since 2016: 17.

FWI at the start 0.0
Minimum humidity 59 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Santa Ana fire, September 2023
13,610 ha 22 days FWI 1.9 Min. humidity 59 % 36 km away, in 2023

First rain (1 mm or more) after it ended: 1.0 mm on 30 Sept.

What happened to them

11 days
median duration
4,158 ha
median area
18 %
went past 10,000 ha
6.2 mm
rain at the end (median; 16 of 17 had it)

It was 2.0 times larger than the median of its twins and lasted 23 days, against 11 days.

Only 3 of its 17 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 1 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

33.5 mmfirst rain
14 Novthe day after it ended
52km/h · max. gust

It was considered over on 13 Nov, and on 14 Nov 33.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 16 of 17, with a median of 6.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 15 Oct 2019
After · 20 Nov 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 408Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the Santa Ana fire last?
GWIS (Copernicus) dates it between 22 October 2019 and 13 November 2019: 23 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 8,193 hectares (81.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Santa Ana (8,235 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 37.5 °C, humidity dropped to 41 % and gusts hit 52 km/h. The fire danger index (FWI) reached 15, class Moderate.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 17. Their median duration was 11 days and their median area 4,158 ha; 18 % went past 10,000 ha. Only 3 of its 17 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 1 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 408 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.