Skip to content
worldfires
BO · Bolivia · →

San Joaquín fire, 15 August 2020 San Joaquín

Out · last detection 28 Sept 2020, 06:22 UTC

The fire started on 15 August 2020 in San Joaquín, Bolivia, and satellites saw it burning for 45 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 87,559 hectares from heat detections, spread across a single municipality.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

Other fire pages in the same area and on the same dates:

It is the 4th largest in Beni since 2016 (of 904 with a page). Number 2 in Bolivia in 2020, of 211.

Compare with…
Burnt area
87,559ha
GWIS perimeter (Copernicus)
Duration
45days
15 Aug 2020 – 28 Sept 2020
Municipalities hit
1
municipalities
Started on
15 Aug
2020
Heat detections
3,662
in a single hotspot: 459 MW
Danger at start
25
High · FWI index
Average daily power
1.4GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 15 Aug28 Sept
28 Sept 2020

How it evolved, day by day

15 Aug 2020 · 407 MW · 32 16 Aug 2020 · 106 MW · 8 17 Aug 2020 · 1,106 MW · 58 18 Aug 2020 · 417 MW · 35 19 Aug 2020 · 1,692 MW · 91 20 Aug 2020 · 32 MW · 6 22 Aug 2020 · 6 MW · 1 23 Aug 2020 · 1,244 MW · 117 24 Aug 2020 · 7,892 MW · 223 25 Aug 2020 · 7,568 MW · 399 26 Aug 2020 · 14,363 MW · 642 27 Aug 2020 · 7,013 MW · 585 28 Aug 2020 · 3,299 MW · 398 29 Aug 2020 · 2,974 MW · 295 30 Aug 2020 · 796 MW · 122 31 Aug 2020 · 12 MW · 3 1 Sept 2020 · 273 MW · 17 2 Sept 2020 · 509 MW · 30 3 Sept 2020 · 1,045 MW · 60 4 Sept 2020 · 885 MW · 84 5 Sept 2020 · 342 MW · 40 6 Sept 2020 · 121 MW · 13 7 Sept 2020 · 120 MW · 12 8 Sept 2020 · 88 MW · 13 9 Sept 2020 · 1,303 MW · 64 10 Sept 2020 · 544 MW · 55 11 Sept 2020 · 456 MW · 20 12 Sept 2020 · 213 MW · 24 13 Sept 2020 · 781 MW · 46 14 Sept 2020 · 487 MW · 44 15 Sept 2020 · 231 MW · 12 16 Sept 2020 · 307 MW · 26 17 Sept 2020 · 236 MW · 15 18 Sept 2020 · 7 MW · 4 19 Sept 2020 · 219 MW · 16 21 Sept 2020 · 2 MW · 1 22 Sept 2020 · 189 MW · 10 25 Sept 2020 · 655 MW · 19 26 Sept 2020 · 70 MW · 11 27 Sept 2020 · 7 MW · 5 28 Sept 2020 · 15 MW · 6
15 Aug 22 Aug 26 Aug 28 Aug 3 Sept 9 Sept 15 Sept 22 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
56km/h · peak gust
33%lowest humidity

It had gone 20 days without rain (1 mm or more) when it started. Rain came after the fire: 1.3 mm on 29 Sept.

This area had burned before

42% of the perimeter overlaps earlier fires recorded since 2016: 26,782 ha in 2016, 16,575 ha in 2017, 2,286 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 36,632 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 55% of the area of London (876 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Joaquín 6,808 inhabitants where it started
    88,218 ha reached on 15 Aug
    10 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area1.1 ha
Residents≈ 100

Inside the perimeter there were about 1.1 hectares of built-up land and about 100 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
15 Aug 34.3 °C 50 % 40 km/h 0.3 mm High 25
16 Aug 35.0 °C 44 % 45 km/h 0.2 mm High 25
17 Aug 33.9 °C 38 % 42 km/h 0.0 mm High 26
18 Aug 35.9 °C 35 % 48 km/h 0.0 mm High 34
19 Aug 35.1 °C 43 % 53 km/h 0.0 mm High 34
20 Aug 27.4 °C 52 % 56 km/h 4.0 mm Low 9
21 Aug 18.7 °C 46 % 56 km/h 0.0 mm Moderate 17
22 Aug 21.0 °C 36 % 36 km/h 0.0 mm Moderate 18
23 Aug 27.5 °C 40 % 17 km/h 0.0 mm Moderate 17
24 Aug 32.4 °C 42 % 33 km/h 0.0 mm High 22
25 Aug 34.0 °C 36 % 38 km/h 0.0 mm High 27
26 Aug 34.4 °C 38 % 39 km/h 0.0 mm High 28
27 Aug 35.9 °C 36 % 32 km/h 0.0 mm High 27
28 Aug 37.5 °C 33 % 25 km/h 0.0 mm High 26
29 Aug 35.6 °C 38 % 32 km/h 0.0 mm High 29
30 Aug 35.4 °C 50 % 28 km/h 0.6 mm High 22
31 Aug 30.7 °C 57 % 30 km/h 1.6 mm Low 10
1 Sept 32.8 °C 45 % 29 km/h 0.0 mm Moderate 20
2 Sept 31.6 °C 44 % 31 km/h 0.0 mm High 22
3 Sept 33.1 °C 40 % 24 km/h 0.0 mm High 23
4 Sept 34.6 °C 41 % 19 km/h 0.0 mm High 22
5 Sept 36.1 °C 36 % 31 km/h 0.0 mm High 28
6 Sept 35.2 °C 42 % 31 km/h 0.0 mm High 26
7 Sept 32.3 °C 45 % 32 km/h 2.3 mm Moderate 14
8 Sept 33.0 °C 39 % 32 km/h 0.0 mm High 24
9 Sept 35.8 °C 39 % 17 km/h 0.0 mm High 22
10 Sept 36.3 °C 39 % 19 km/h 0.0 mm High 23
11 Sept 36.3 °C 38 % 35 km/h 0.0 mm High 29
12 Sept 35.1 °C 44 % 29 km/h 0.0 mm High 27
13 Sept 35.9 °C 40 % 25 km/h 0.1 mm High 26
14 Sept 31.0 °C 60 % 34 km/h 0.6 mm High 22
15 Sept 30.3 °C 50 % 33 km/h 0.0 mm High 22
16 Sept 34.7 °C 43 % 20 km/h 0.0 mm High 22
17 Sept 35.2 °C 40 % 19 km/h 0.0 mm High 24
18 Sept 32.7 °C 54 % 21 km/h 0.1 mm High 22
19 Sept 34.6 °C 42 % 30 km/h 0.0 mm High 24
20 Sept 30.4 °C 56 % 42 km/h 9.6 mm Low 7
21 Sept 30.3 °C 52 % 38 km/h 0.0 mm Moderate 14
22 Sept 28.1 °C 48 % 42 km/h 2.5 mm Low 8
23 Sept 34.2 °C 41 % 24 km/h 0.0 mm Moderate 16
24 Sept 35.3 °C 44 % 17 km/h 0.1 mm Moderate 18
25 Sept 36.2 °C 42 % 29 km/h 0.2 mm High 22
26 Sept 34.8 °C 49 % 48 km/h 0.0 mm High 28
27 Sept 34.0 °C 51 % 44 km/h 0.3 mm High 25
28 Sept 30.4 °C 66 % 24 km/h 3.7 mm Very low 4
29 Sept after 32.8 °C 59 % 28 km/h 1.3 mm Very low 5

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 8 Aug 2020
After · 5 Oct 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 3,662Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia ›

Frequently asked questions

How long did the San Joaquín fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 15 August 2020 to 28 September 2020 (45 days). The perimeter dates it from 17 August 2020 to 24 September 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 87,559 hectares (875.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered San Joaquín (88,218 ha, 10 %).
What was the weather like?
During the fire the temperature reached 37.5 °C, humidity dropped to 33 % and gusts hit 56 km/h. The fire danger index (FWI) reached 34, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings ›

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 24 September 2020 → 28 September 2020.
  2. Start date: 17 August 2020 → 15 August 2020.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 3 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 17 August 2020 to 24 September 2020. 3,662 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.