Skip to content
worldfires
BO · Bolivia · –

San Ignacio fire, 30 September 2024 San Ignacio

Out · last detection 18 Oct 2024, 05:12 UTC

The fire started on 30 September 2024 in San Ignacio, Bolivia, and satellites saw it burning for 19 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 10,419 hectares from heat detections, spread across a single municipality.

It is the 135th largest in Beni since 2016 (of 858 with a page). Number 76 in Bolivia in 2024, of 295.

Burnt area
10,419ha
GWIS perimeter (Copernicus)
Duration
19days
30 Sept 2024 – 18 Oct 2024
Municipalities hit
1
municipalities
Started on
30 Sept
2024
Heat detections
684
in a single hotspot: 138 MW
Danger at start
21
Moderate · FWI index
Average daily power
523MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 30 Sept18 Oct
18 Oct 2024

How it evolved, day by day

1 Oct 2024 · 329 MW · 25 2 Oct 2024 · 655 MW · 50 3 Oct 2024 · 40 MW · 7 4 Oct 2024 · 1,885 MW · 128 5 Oct 2024 · 1,187 MW · 100 6 Oct 2024 · 2,343 MW · 106 7 Oct 2024 · 238 MW · 34 8 Oct 2024 · 222 MW · 28 10 Oct 2024 · 3 MW · 1 11 Oct 2024 · 156 MW · 21 12 Oct 2024 · 429 MW · 23 13 Oct 2024 · 538 MW · 46 14 Oct 2024 · 81 MW · 11 15 Oct 2024 · 187 MW · 21 16 Oct 2024 · 505 MW · 57 17 Oct 2024 · 53 MW · 13 18 Oct 2024 · 34 MW · 13
1 Oct 6 Oct 10 Oct 14 Oct 18 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

40°high
52km/h · peak gust
28%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started. Rain came after the fire: 15.5 mm on 19 Oct.

This area had burned before

84% of the perimeter overlaps earlier fires recorded since 2016: 360 ha in 2016, 19 ha in 2018, 111 ha in 2019, 240 ha in 2020, 434 ha in 2021, 7,120 ha in 2022, 5,506 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 8,738 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 6.6% of the area of London (104 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Ignacio 21,584 inhabitants where it started
    10,447 ha
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
30 Sept 36.5 °C 44 % 41 km/h 0.0 mm Moderate 21
1 Oct 37.6 °C 39 % 48 km/h 0.0 mm High 26
2 Oct 38.2 °C 40 % 41 km/h 0.0 mm High 24
3 Oct 32.3 °C 39 % 39 km/h 0.3 mm High 25
4 Oct 34.4 °C 33 % 32 km/h 0.0 mm High 22
5 Oct 39.2 °C 28 % 22 km/h 0.0 mm High 22
6 Oct 39.9 °C 30 % 31 km/h 0.0 mm High 28
7 Oct 38.9 °C 37 % 37 km/h 0.0 mm High 32
8 Oct 38.9 °C 37 % 49 km/h 1.3 mm High 35
9 Oct 35.2 °C 45 % 40 km/h 6.7 mm Moderate 16
10 Oct 36.8 °C 42 % 52 km/h 0.1 mm Low 7
11 Oct 37.6 °C 36 % 50 km/h 0.3 mm High 26
12 Oct 38.1 °C 37 % 48 km/h 0.2 mm High 24
13 Oct 40.0 °C 31 % 29 km/h 0.0 mm High 29
14 Oct 35.8 °C 44 % 22 km/h 0.6 mm Moderate 18
15 Oct 38.7 °C 33 % 38 km/h 0.0 mm High 29
16 Oct 36.7 °C 41 % 35 km/h 3.5 mm High 26
17 Oct 34.0 °C 51 % 38 km/h 2.6 mm Very low 3
18 Oct 33.0 °C 59 % 29 km/h 17.7 mm Low 5
19 Oct after 29.6 °C 64 % 27 km/h 15.5 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 21.1, a minimum humidity of 44% and 2 days without rain. Fires in the area that started in weather like this since 2016: 41.

FWI at the start 21.1
Minimum humidity 44 %
Days without rain 2
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

San Ignacio fire, November 2023
3,885 ha 7 days FWI 20.9 Min. humidity 42 % 52 km away, in 2023

First rain (1 mm or more) after it ended: 4.8 mm on 19 Nov.

What happened to them

11 days
median duration
4,297 ha
median area
12 %
went past 10,000 ha
4.4 mm
rain at the end (median; 39 of 41 had it)

It was 2.4 times larger than the median of its twins and lasted 19 days, against 11 days.

Only 4 of its 41 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 2 of 41, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.4 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

15.5 mmfirst rain
19 Octthe day after it ended
52km/h · max. gust

It was considered over on 18 Oct, and on 19 Oct 15.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 39 of 41, with a median of 4.4 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 23 Sept 2024
After · 25 Oct 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 12 September 2024 the air beside the fire reached 255 µg/m³ of PM2.5. That day averaged 206: 14 times the WHO daily guideline (15).

PM2.5 peak255 µg/m³
Days over the guideline41 days
PM10365 µg/m³
Optical depth5.39
10 Sept19 Sept28 Sept7 Oct16 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 684Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the San Ignacio fire last?
GWIS (Copernicus) dates it between 30 September 2024 and 18 October 2024: 19 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 10,419 hectares (104.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered San Ignacio (10,447 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 40.0 °C, humidity dropped to 28 % and gusts hit 52 km/h. The fire danger index (FWI) reached 35, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 41. Their median duration was 11 days and their median area 4,297 ha; 12 % went past 10,000 ha. Only 4 of its 41 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 2 of 41, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.4 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 684 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.