Skip to content
worldfires
BO · Bolivia · –

San Ignacio fire, 10 November 2023 San Ignacio

Out · last detection 16 Nov 2023, 18:05 UTC

The fire started on 10 November 2023 in San Ignacio, Bolivia, and satellites saw it burning for 7 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,885 hectares from heat detections, spread across a single municipality.

It is the 596th largest in Beni since 2016 (of 858 with a page). Number 176 in Bolivia in 2023, of 247.

Burnt area
3,885ha
GWIS perimeter (Copernicus)
Duration
7days
10 Nov 2023 – 16 Nov 2023
Municipalities hit
1
municipalities
Started on
10 Nov
2023
Heat detections
133
in a single hotspot: 90 MW
Danger at start
21
Moderate · FWI index
Average daily power
323MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 10 Nov16 Nov
16 Nov 2023

How it evolved, day by day

10 Nov 2023 · 503 MW · 16 11 Nov 2023 · 457 MW · 56 12 Nov 2023 · 548 MW · 36 13 Nov 2023 · 82 MW · 22 16 Nov 2023 · 26 MW · 3
10 Nov 11 Nov 12 Nov 13 Nov 16 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

39°high
54km/h · peak gust
35%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 4.8 mm on 19 Nov.

This area had burned before

87% of the perimeter overlaps earlier fires recorded since 2016: 1,972 ha in 2016, 902 ha in 2017, 1,479 ha in 2019, 1,791 ha in 2020, 2,174 ha in 2022. Part of it burned more than once, so the yearly figures add up to more than the 3,384 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 2.5% of the area of London (39 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. San Ignacio 21,584 inhabitants where it started
    3,888 ha
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
10 Nov 37.7 °C 42 % 36 km/h 0.0 mm Moderate 21
11 Nov 38.8 °C 35 % 42 km/h 0.1 mm High 28
12 Nov 38.2 °C 37 % 48 km/h 0.2 mm High 34
13 Nov 38.1 °C 42 % 46 km/h 1.0 mm High 31
14 Nov 37.0 °C 44 % 42 km/h 0.1 mm High 23
15 Nov 37.9 °C 41 % 49 km/h 0.0 mm High 30
16 Nov 37.8 °C 41 % 54 km/h 0.1 mm High 33
17 Nov after 39.4 °C 33 % 55 km/h 0.0 mm Very high 43
18 Nov after 39.4 °C 33 % 60 km/h 0.0 mm Very high 49
19 Nov after 36.7 °C 40 % 47 km/h 4.8 mm High 29

Its twins: fires that started in the same weather

It started with an FWI of 20.9, a minimum humidity of 42% and 1 day without rain. Fires in the area that started in weather like this since 2016: 46.

FWI at the start 20.9
Minimum humidity 42 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

San Ramón fire, September 2021
45,785 ha 28 days FWI 19.1 Min. humidity 42 % 78 km away, in 2021

First rain (1 mm or more) after it ended: 15.3 mm on 16 Oct.

What happened to them

11 days
median duration
5,934 ha
median area
28 %
went past 10,000 ha
7.0 mm
rain at the end (median; 44 of 46 had it)

It stayed below its twins: 3,885 ha against a median of 5,934 ha. It lasted 7 days, against 11 days.

In 2 of 46, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 7.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

4.8 mmfirst rain
19 Nov3 days after it ended
54km/h · max. gust

It was considered over on 16 Nov, and on 19 Nov 4.8 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 44 of 46, with a median of 7.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 3 Nov 2023
After · 23 Nov 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 14 November 2023 the air beside the fire reached 52 µg/m³ of PM2.5. That day averaged 33: 2.2 times the WHO daily guideline (15).

PM2.5 peak52 µg/m³
Days over the guideline6 days
PM1074 µg/m³
Optical depth0.91
8 Nov10 Nov12 Nov14 Nov16 Nov
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 133Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the San Ignacio fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 10 November 2023 to 16 November 2023 (7 days). The perimeter dates it from 10 November 2023 to 13 November 2023.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,885 hectares (38.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered San Ignacio (3,888 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 38.8 °C, humidity dropped to 35 % and gusts hit 54 km/h. The fire danger index (FWI) reached 34, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 46. Their median duration was 11 days and their median area 5,934 ha; 28 % went past 10,000 ha. In 2 of 46, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 7.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 13 November 2023 → 16 November 2023.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 10 November 2023 to 13 November 2023. 133 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.