Skip to content
worldfires
AU · Australia · –

Roper Gulf fire, 27 September 2024 Roper Gulf

Out · last detection 14 Oct 2024, 03:47 UTC

The fire started on 27 September 2024 in Roper Gulf, Australia, and satellites saw it burning for 18 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 42,222 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
42,222ha
GWIS perimeter (Copernicus)
Duration
18days
27 Sept 2024 – 14 Oct 2024
Municipalities hit
1
local government areas
Started on
27 Sept
2024
Heat detections
1,635
in a single hotspot: 241 MW
Danger at start
53
Extreme · FWI index
Average daily power
1.1GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 27 Sept14 Oct
14 Oct 2024

How it evolved, day by day

27 Sept 2024 · 2 MW · 1 28 Sept 2024 · 444 MW · 58 29 Sept 2024 · 587 MW · 118 30 Sept 2024 · 1,490 MW · 146 1 Oct 2024 · 790 MW · 89 2 Oct 2024 · 459 MW · 63 3 Oct 2024 · 3,758 MW · 149 4 Oct 2024 · 824 MW · 85 5 Oct 2024 · 617 MW · 101 6 Oct 2024 · 579 MW · 97 7 Oct 2024 · 771 MW · 95 8 Oct 2024 · 658 MW · 76 9 Oct 2024 · 5,652 MW · 201 10 Oct 2024 · 1,887 MW · 219 11 Oct 2024 · 1,956 MW · 105 12 Oct 2024 · 73 MW · 29 13 Oct 2024 · 5 MW · 2 14 Oct 2024 · 3 MW · 1
27 Sept 1 Oct 5 Oct 9 Oct 13 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

41°high
48km/h · peak gust
7%lowest humidity

It had gone 9 days without rain (1 mm or more) when it started.

This area had burned before

71% of the perimeter overlaps earlier fires recorded since 2016: 5,813 ha in 2017, 15,354 ha in 2019, 473 ha in 2020, 7,320 ha in 2021, 7,145 ha in 2022, 636 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 29,842 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 27% of the area of London (422 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Roper Gulf where it started
    42,718 ha
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
27 Sept 36.7 °C 26 % 41 km/h 0.0 mm Extreme 53
28 Sept 37.9 °C 15 % 32 km/h 0.0 mm Very high 48
29 Sept 38.4 °C 8 % 26 km/h 0.0 mm Extreme 58
30 Sept 39.2 °C 7 % 45 km/h 0.0 mm Very extreme 93
1 Oct 39.4 °C 12 % 48 km/h 0.0 mm Very extreme 98
2 Oct 38.9 °C 11 % 46 km/h 0.0 mm Very extreme 84
3 Oct 35.7 °C 29 % 41 km/h 0.0 mm Extreme 57
4 Oct 36.7 °C 28 % 38 km/h 0.5 mm Extreme 58
5 Oct 35.8 °C 33 % 38 km/h 0.0 mm Extreme 53
6 Oct 37.2 °C 25 % 40 km/h 0.0 mm Extreme 62
7 Oct 39.0 °C 23 % 38 km/h 0.2 mm Very high 48
8 Oct 39.4 °C 20 % 37 km/h 0.0 mm Extreme 59
9 Oct 40.8 °C 11 % 39 km/h 0.0 mm Very extreme 79
10 Oct 40.2 °C 8 % 40 km/h 0.0 mm Very extreme 82
11 Oct 39.8 °C 11 % 44 km/h 0.0 mm Very extreme 92
12 Oct 36.1 °C 33 % 36 km/h 0.2 mm Extreme 59
13 Oct 33.4 °C 42 % 43 km/h 1.3 mm High 36
14 Oct 35.5 °C 29 % 40 km/h 0.2 mm Very high 49
15 Oct after 39.0 °C 19 % 41 km/h 0.0 mm Extreme 59
16 Oct after 37.8 °C 28 % 40 km/h 0.0 mm Very extreme 72
17 Oct after 37.3 °C 29 % 43 km/h 0.0 mm Very extreme 70
18 Oct after 37.0 °C 31 % 37 km/h 0.0 mm Extreme 54
19 Oct after 37.2 °C 31 % 34 km/h 0.1 mm Very high 47
20 Oct after 38.4 °C 28 % 34 km/h 0.5 mm Very high 47
21 Oct after 41.7 °C 9 % 34 km/h 0.0 mm Very extreme 74
22 Oct after 39.4 °C 23 % 41 km/h 0.0 mm Extreme 64
23 Oct after 38.9 °C 26 % 44 km/h 0.0 mm Extreme 61
24 Oct after 39.6 °C 22 % 35 km/h 0.0 mm Very high 50

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 20 Sept 2024
After · 21 Oct 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 11 October 2024 the air beside the fire reached 118 µg/m³ of PM2.5. That day averaged 32: 2.1 times the WHO daily guideline (15).

PM2.5 peak118 µg/m³
Days over the guideline6 days
PM10168 µg/m³
Optical depth0.93
26 Sept1 Oct6 Oct11 Oct16 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1,635Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Roper Gulf fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 27 September 2024 to 14 October 2024 (18 days). The perimeter dates it from 28 September 2024 to 14 October 2024.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 42,222 hectares (422.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Roper Gulf (42,718 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 40.8 °C, humidity dropped to 7 % and gusts hit 48 km/h. The fire danger index (FWI) reached 98, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 28 September 2024 → 27 September 2024.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 28 September 2024 to 14 October 2024. 1,635 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.