Skip to content
worldfires
AU · Australia · –

Roper Gulf fire, 21 September 2021 Roper Gulf

Out · last detection 6 Oct 2021, 03:49 UTC

The fire started on 21 September 2021 in Roper Gulf, Australia, and satellites saw it burning for 16 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 40,564 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
40,564ha
GWIS perimeter (Copernicus)
Duration
16days
21 Sept 2021 – 6 Oct 2021
Municipalities hit
1
local government areas
Started on
21 Sept
2021
Heat detections
1,537
in a single hotspot: 171 MW
Danger at start
130
Very extreme · FWI index
Average daily power
1.1GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 21 Sept6 Oct
6 Oct 2021

How it evolved, day by day

21 Sept 2021 · 409 MW · 76 22 Sept 2021 · 53 MW · 35 23 Sept 2021 · 2,097 MW · 76 24 Sept 2021 · 3,422 MW · 218 25 Sept 2021 · 3,691 MW · 361 26 Sept 2021 · 1,298 MW · 220 27 Sept 2021 · 1,591 MW · 214 28 Sept 2021 · 3,213 MW · 150 29 Sept 2021 · 711 MW · 63 30 Sept 2021 · 39 MW · 7 1 Oct 2021 · 216 MW · 28 2 Oct 2021 · 85 MW · 22 3 Oct 2021 · 52 MW · 15 4 Oct 2021 · 169 MW · 16 5 Oct 2021 · 34 MW · 15 6 Oct 2021 · 237 MW · 21
21 Sept 25 Sept 29 Sept 3 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

40°high
69km/h · peak gust
6%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

26% of the perimeter overlaps earlier fires recorded since 2016: 140 ha in 2016, 4,880 ha in 2017, 5,435 ha in 2018, 470 ha in 2019.

How big is it?

10 km
It burned the equivalent of 26% of the area of London (406 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Roper Gulf where it started
    41,099 ha
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia Strong wind: 39 % of the area in Australia Very dry air: 28 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
21 Sept 34.1 °C 6 % 69 km/h 0.0 mm Very extreme 130
22 Sept 28.4 °C 6 % 59 km/h 0.0 mm Very extreme 90
23 Sept 32.1 °C 8 % 44 km/h 0.0 mm Extreme 70
24 Sept 34.6 °C 11 % 42 km/h 0.0 mm Very extreme 76
25 Sept 35.1 °C 17 % 43 km/h 0.0 mm Extreme 67
26 Sept 36.8 °C 15 % 42 km/h 0.0 mm Extreme 67
27 Sept 38.3 °C 13 % 48 km/h 0.0 mm Extreme 53
28 Sept 36.5 °C 24 % 50 km/h 0.0 mm Very extreme 78
29 Sept 35.7 °C 28 % 44 km/h 0.0 mm Extreme 67
30 Sept 35.7 °C 27 % 37 km/h 0.0 mm Extreme 57
1 Oct 36.6 °C 24 % 36 km/h 0.0 mm Very high 42
2 Oct 39.1 °C 21 % 44 km/h 0.0 mm Extreme 55
3 Oct 38.0 °C 24 % 39 km/h 0.0 mm Extreme 54
4 Oct 38.7 °C 21 % 36 km/h 0.0 mm Very high 39
5 Oct 34.9 °C 30 % 27 km/h 0.1 mm Very high 45
6 Oct 40.3 °C 9 % 46 km/h 0.0 mm Very extreme 97
7 Oct after 39.3 °C 18 % 50 km/h 0.0 mm Very extreme 76
8 Oct after 37.3 °C 24 % 40 km/h 0.0 mm Extreme 63
9 Oct after 37.4 °C 26 % 39 km/h 0.0 mm Very extreme 72
10 Oct after 36.6 °C 31 % 46 km/h 0.2 mm Very extreme 73
11 Oct after 35.3 °C 24 % 42 km/h 0.0 mm Very high 48
12 Oct after 36.5 °C 25 % 42 km/h 0.0 mm Very high 39
13 Oct after 38.5 °C 25 % 38 km/h 0.0 mm Very high 44
14 Oct after 36.3 °C 30 % 35 km/h 0.5 mm Extreme 56
15 Oct after 35.4 °C 37 % 33 km/h 0.7 mm High 29
16 Oct after 38.4 °C 14 % 38 km/h 0.0 mm Extreme 63

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 14 Sept 2021
After · 13 Oct 2021

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 1,537Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Roper Gulf fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 21 September 2021 to 6 October 2021 (16 days). The perimeter dates it from 23 September 2021 to 4 October 2021.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 40,564 hectares (405.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Roper Gulf (41,099 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 40.3 °C, humidity dropped to 6 % and gusts hit 69 km/h. The fire danger index (FWI) reached 130, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 4 October 2021 → 6 October 2021.
  2. Start date: 23 September 2021 → 21 September 2021.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 23 September 2021 to 4 October 2021. 1,537 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.