Skip to content
worldfires
AO · Angola · →

Quimbele fire, 7 August 2026 Quimbele, Milunga

Out · last detection 16 Sept 2026, 13:08 UTC

The fire started on 7 August 2026 in Quimbele, Angola, and satellites saw it burning for 41 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 75,369 hectares from heat detections, spread across 2 municipalities.

It is the 2th largest in Uíge since 2016 (of 59 with a page). Number 10 in Angola in 2026, of 487.

Compare with…
Burnt area
75,369ha
GWIS perimeter (Copernicus)
Duration
41days
7 Aug 2026 – 16 Sept 2026
Municipalities hit
2
municipalities
Started on
7 Aug
2026
Heat detections
2,526
in a single hotspot: 169 MW
Danger at start
25
High · FWI index
Average daily power
849MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 7 Aug16 Sept
16 Sept 2026

How it evolved, day by day

7 Aug 2026 · 61 MW · 3 9 Aug 2026 · 11 MW · 2 10 Aug 2026 · 220 MW · 11 11 Aug 2026 · 134 MW · 9 12 Aug 2026 · 236 MW · 17 13 Aug 2026 · 71 MW · 9 14 Aug 2026 · 117 MW · 11 15 Aug 2026 · 427 MW · 32 16 Aug 2026 · 33 MW · 7 17 Aug 2026 · 1,414 MW · 134 19 Aug 2026 · 645 MW · 57 20 Aug 2026 · 2,434 MW · 156 21 Aug 2026 · 1,158 MW · 85 22 Aug 2026 · 4,529 MW · 387 23 Aug 2026 · 131 MW · 14 24 Aug 2026 · 1,624 MW · 185 25 Aug 2026 · 442 MW · 30 26 Aug 2026 · 664 MW · 54 27 Aug 2026 · 2,400 MW · 212 30 Aug 2026 · 30 MW · 5 31 Aug 2026 · 911 MW · 69 1 Sept 2026 · 1,358 MW · 106 2 Sept 2026 · 3,756 MW · 278 3 Sept 2026 · 2,692 MW · 151 4 Sept 2026 · 650 MW · 65 5 Sept 2026 · 379 MW · 40 6 Sept 2026 · 1 MW · 2 7 Sept 2026 · 1,342 MW · 130 8 Sept 2026 · 954 MW · 48 9 Sept 2026 · 120 MW · 9 10 Sept 2026 · 62 MW · 7 11 Sept 2026 · 233 MW · 20 12 Sept 2026 · 931 MW · 95 13 Sept 2026 · 46 MW · 5 14 Sept 2026 · 1,048 MW · 62 15 Sept 2026 · 123 MW · 16 16 Sept 2026 · 41 MW · 3
7 Aug 14 Aug 21 Aug 22 Aug 27 Aug 4 Sept 10 Sept 16 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
34km/h · peak gust
30%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 1.1 mm on 20 Sept.

This area had burned before

90% of the perimeter overlaps earlier fires recorded since 2016: 23,457 ha in 2016, 29,607 ha in 2017, 13,365 ha in 2018, 21,135 ha in 2019, 26,447 ha in 2020, 16,907 ha in 2021, 8,301 ha in 2022, 18,483 ha in 2023, 35,857 ha in 2024, 50,767 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 67,965 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 48% of the area of London (754 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Quimbele where it started
    64,012 ha reached on 7 Aug
    9.3 %
  2. 11,861 ha reached on 9 Aug
    1.9 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area130 ha
Residents≈ 11,000

Inside the perimeter there were about 130 hectares of built-up land and about 11,000 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
7 Aug 28.1 °C 45 % 22 km/h 0.0 mm High 25
8 Aug 29.5 °C 46 % 23 km/h 0.0 mm High 25
9 Aug 28.3 °C 53 % 23 km/h 0.1 mm High 22
10 Aug 28.1 °C 51 % 26 km/h 0.0 mm High 24
11 Aug 27.8 °C 49 % 27 km/h 0.0 mm High 23
12 Aug 30.4 °C 39 % 22 km/h 0.0 mm High 24
13 Aug 31.2 °C 43 % 25 km/h 0.9 mm Moderate 19
14 Aug 30.3 °C 46 % 24 km/h 0.1 mm Moderate 21
15 Aug 28.8 °C 49 % 27 km/h 0.0 mm High 22
16 Aug 29.4 °C 47 % 26 km/h 0.1 mm High 22
17 Aug 30.7 °C 40 % 22 km/h 0.1 mm High 25
18 Aug 30.9 °C 37 % 30 km/h 0.0 mm High 29
19 Aug 30.3 °C 35 % 24 km/h 0.0 mm High 28
20 Aug 31.7 °C 30 % 23 km/h 0.0 mm High 30
21 Aug 29.0 °C 45 % 25 km/h 0.0 mm High 28
22 Aug 31.0 °C 42 % 23 km/h 0.0 mm High 28
23 Aug 31.2 °C 47 % 26 km/h 0.0 mm High 25
24 Aug 28.2 °C 56 % 28 km/h 0.4 mm High 24
25 Aug 30.0 °C 49 % 21 km/h 0.0 mm High 22
26 Aug 32.4 °C 42 % 23 km/h 0.9 mm Moderate 19
27 Aug 34.5 °C 36 % 28 km/h 0.0 mm High 28
28 Aug 28.8 °C 52 % 34 km/h 1.1 mm Moderate 16
29 Aug 26.2 °C 63 % 25 km/h 1.4 mm Low 9
30 Aug 29.8 °C 50 % 22 km/h 0.3 mm Moderate 17
31 Aug 28.6 °C 52 % 26 km/h 0.5 mm Moderate 19
1 Sept 33.9 °C 36 % 23 km/h 0.9 mm High 23
2 Sept 34.1 °C 40 % 21 km/h 4.8 mm Low 7
3 Sept 28.4 °C 57 % 31 km/h 4.9 mm Very low 4
4 Sept 32.4 °C 41 % 28 km/h 0.2 mm Moderate 13
5 Sept 31.9 °C 44 % 22 km/h 0.3 mm Moderate 18
6 Sept 31.6 °C 43 % 22 km/h 2.2 mm Low 9
7 Sept 32.6 °C 44 % 26 km/h 3.1 mm Low 5
8 Sept 33.9 °C 39 % 28 km/h 3.1 mm Very low 5
9 Sept 29.9 °C 52 % 31 km/h 1.8 mm Low 6
10 Sept 30.0 °C 46 % 22 km/h 0.4 mm Moderate 12
11 Sept 30.4 °C 47 % 30 km/h 3.2 mm Very low 4
12 Sept 31.0 °C 47 % 19 km/h 0.2 mm Low 11
13 Sept 29.9 °C 50 % 27 km/h 0.2 mm Moderate 13
14 Sept 33.8 °C 40 % 20 km/h 0.2 mm Moderate 16
15 Sept 31.5 °C 44 % 22 km/h 6.6 mm Very low 3
16 Sept 31.0 °C 47 % 22 km/h 1.7 mm Very low 5
17 Sept after 30.6 °C 47 % 26 km/h 0.1 mm Low 10
18 Sept after 30.3 °C 49 % 24 km/h 0.0 mm Moderate 12
19 Sept after 30.7 °C 48 % 20 km/h 0.7 mm Moderate 11
20 Sept after 31.5 °C 45 % 22 km/h 1.1 mm Low 10

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 31 Jul 2026
After · 23 Sept 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 24 August 2026 the air beside the fire reached 332 µg/m³ of PM2.5. That day averaged 192: 13 times the WHO daily guideline (15).

PM2.5 peak332 µg/m³
Days over the guideline43 days
PM10344 µg/m³
Optical depth2.98
891011121314151617181920212223242526272829303112345678910111213141516171819
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 2,526Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Angola ›

Frequently asked questions

How long did the Quimbele fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 7 August 2026 to 16 September 2026 (41 days). The perimeter dates it from 14 August 2026 to 9 September 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 75,369 hectares (753.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Quimbele (64,012 ha, 9.3 %); Milunga (11,861 ha, 1.9 %).
What was the weather like?
During the fire the temperature reached 34.5 °C, humidity dropped to 30 % and gusts hit 34 km/h. The fire danger index (FWI) reached 30, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Angola (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 10 August 2026 → 7 August 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 5 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 14 August 2026 to 9 September 2026. 2,526 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.