Skip to content
worldfires
ET · Ethiopia · →

Quara fire, October 2026 Quara

Burning · last detection 30 Oct 2026, 11:08 UTC

The fire started on 20 October 2026 in Quara, Ethiopia, and satellites saw it burning for 11 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,092 hectares from heat detections, spread across a single municipality.

It is the 163th largest in Amhara since 2016 (of 172 with a page). Number 167 in Ethiopia in 2026, of 191.

The power measured by the satellite is low (20.4 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Compare with…

Is it still active?

Satellites detected fire on 30 Oct 2026, 11:08 UTC. Everything suggests it is still burning. Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.

Burnt area
2,092ha
GWIS perimeter (Copernicus)
Duration
11days
20 Oct 2026 – 30 Oct 2026
Municipalities hit
1
districts
Started on
20 Oct
2026
Heat detections
25
in a single hotspot: 20 MW
Danger at start
38
Very high · FWI index
Average daily power
19MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 20 Oct30 Oct
30 Oct 2026

How it evolved, day by day

20 Oct 2026 · 10 MW · 2 21 Oct 2026 · 0 MW · 0 22 Oct 2026 · 0 MW · 0 23 Oct 2026 · 80 MW · 6 24 Oct 2026 · 14 MW · 4 25 Oct 2026 · 4 MW · 1 26 Oct 2026 · 6 MW · 1 27 Oct 2026 · 13 MW · 1 28 Oct 2026 · 6 MW · 2 29 Oct 2026 · 18 MW · 3 30 Oct 2026 · 17 MW · 5
20 Oct 22 Oct 23 Oct 24 Oct 26 Oct 28 Oct 30 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

41°high
37km/h · peak gust
14%lowest humidity

It had gone 8 days without rain (1 mm or more) when it started.

This area had burned before

95% of the perimeter overlaps earlier fires recorded since 2016: 148 ha in 2016, 952 ha in 2017, 1,580 ha in 2019, 1,116 ha in 2020, 1,229 ha in 2021, 17 ha in 2022, 84 ha in 2023, 267 ha in 2024, 340 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 1,997 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 1.3% of the area of London (21 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Quara where it started
    2,102 ha reached on 20 Oct
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives

Day High Min. humidity Peak gust Rain Danger (FWI)
20 Oct 39.9 °C 18 % 25 km/h 0.0 mm Very high 38
21 Oct 40.3 °C 15 % 28 km/h 0.0 mm Very high 39
22 Oct 40.9 °C 14 % 37 km/h 0.0 mm Very high 47
23 Oct 40.7 °C 14 % 27 km/h 0.0 mm Very high 43
24 Oct 40.1 °C 15 % 23 km/h 0.0 mm Very high 42
25 Oct 40.3 °C 16 % 20 km/h 0.0 mm Very high 41
26 Oct 39.5 °C 16 % 32 km/h 0.1 mm Extreme 52
27 Oct 39.3 °C 21 % 37 km/h 0.3 mm Extreme 53
28 Oct 37.7 °C 22 % 26 km/h 0.0 mm Very high 45
29 Oct 40.5 °C 19 % 24 km/h 0.0 mm Very high 43
30 Oct 39.3 °C 17 % 39 km/h 0.0 mm Extreme 54

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 13 Oct 2026
After · 29 Oct 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 26 October 2026 the air beside the fire reached 26 µg/m³ of PM2.5. That day averaged 20: 1.4 times the WHO daily guideline (15).

PM2.5 peak26 µg/m³
Days over the guideline4 days
PM1055 µg/m³
Optical depth0.44
181920212223242526
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 25Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Ethiopia ›

Frequently asked questions

How long did the Quara fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 20 October 2026 to 30 October 2026 (11 days). The perimeter dates it from 21 October 2026 to 28 October 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,092 hectares (20.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Quara (2,102 ha, 0.2 %).
Is the Quara fire still active?
Yes: satellites detected fire on 30 Oct 2026, 11:08 UTC. Check the emergency service for the official status.
What was the weather like?
During the fire the temperature reached 40.9 °C, humidity dropped to 14 % and gusts hit 37 km/h. The fire danger index (FWI) reached 53, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Ethiopia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 27 October 2026.
  1. Area: 2,040 → 2,092 ha.
  2. Page published (2,040 ha).

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 21 October 2026 to 28 October 2026. 25 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.