Burned area
satellite only6,047ha
Perimeter published by GWIS (Copernicus).
- Source
- GWIS (Copernicus)
- Date
- 5 Oct 2017 – 22 Oct 2017
+− cross-check
No official record is matched to this page to compare it with.
BR · Brazil · –
Pilão Arcado fire, 5 October 2017 Morro Cabeça no Tempo, Pilão Arcado
Out · last detection 22 Oct 2017, 17:15 UTC
The fire started on 5 October 2017 in Pilão Arcado, Brazil, and satellites saw it burning for 18 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,047 hectares from heat detections, spread across 2 municipalities.
It is the 158th largest in Bahia since 2016 (of 386 with a page). Number 352 in Brazil in 2017, of 994.
Use this data
Compare with…
Use this data
Fire page data · version 2026-10-25matches the official recordwith caveatssatellite onlymodel
When copying, the sentence is
Tick the figures you want: they make up the lede and the CSV.
Duration by satellite
satellite only18days
5 Oct 2017 to 22 Oct 2017: first and last day with fire on the page.
- Source
- GWIS (Copernicus) · NASA FIRMS · VIIRS
- Date
- last detection: 22 Oct 2017, 17:15 UTC
+− cross-check
Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.
Start
satellite only5 Oct 2017
First day with fire seen by the satellites or the perimeter.
- Source
- GWIS (Copernicus) · NASA FIRMS · VIIRS
- Date
- 5 Oct 2017
+− cross-check
No official record is matched to this page, so the alert time and the cause are not known here.
Hotspots
satellite only309
VIIRS detections at 375 m. Most intense hotspot: 491 MW.
- Source
- NASA FIRMS · VIIRS (Suomi NPP)
- Date
- 5 Oct 2017 – 22 Oct 2017
+− cross-check
There is no official record to compare with. Each hotspot is a pixel detected in one satellite pass, not a separate fire.
The worst day
satellite only2,221MW
Total radiative power on 5 October 2017; hotspots that day: 22.
- Source
- NASA FIRMS · VIIRS (FRP)
- Date
- 5 Oct 2017
+− cross-check
Fire radiative power (FRP) measures the energy the fire gives off when the satellite passes. Added up by day, it compares intensity, not area.
Danger at the start
model69.9FWI · extreme
Fire Weather Index (Canadian system) computed by WorldFires for the day the fire started. Consecutive days without rain before: 60.
- Source
- WorldFires calculation (Canadian FWI system)
- Date
- 5 Oct 2017, local noon
- Model
- ERA5 0,25° (ECMWF · Copernicus C3S) · Open-Meteo.com
+− cross-check
This is an index computed from weather model data, not a measurement of the fire nor an official warning. Danger warnings are issued by each country’s authority. Emergency number and official warnings
Weather during the fire
model38.1°C · 26% RH
High of 38.1 °C and minimum humidity of 26% on 15 October 2017; gusts of 52 km/h on 5 October 2017.
- Source
- weather model at the fire’s grid cell
- Date
- 5 Oct 2017 – 22 Oct 2017
- Model
- ERA5 0,25° (ECMWF · Copernicus C3S) · Open-Meteo.com
+− cross-check
These are model values for a cell of about 25 km, not from a weather station: they may differ from what was measured on the ground.
This page’s change log has been kept since 24 October 2026: every night what it publishes is compared and the difference is logged. Anything earlier is reconstructed from each source’s date and marked as reconstructed.
Show
-
· reconstructed weatherWeather and FWI computed from the ERA5 reanalysis
-
logLast day with fire: 18 October 2017 → 22 October 2017.
-
· reconstructed GHSLPopulation and built-up area computed
What was saved on 25 October 2026
Every night a snapshot of what the page shows is saved. If anything changes, it appears in the list as a log entry.
- Area
- 6,047 ha
- Dates
- 5 Oct 2017 – 22 Oct 2017
- Name
- Pilão Arcado
- Official record
- —
Versioned permanent link
https://worldfires.org/en/fire/pilao-arcado-2017-10-3?v=2026-10-25A version keeps the area, dates, name and official record; the area as it was logged (changes under 2% are not logged). The map, hotspots and weather always show today’s data.
Citation
A lede of about 60 words figures only, no adjectives
CSV for this fire pilao-arcado-2017-10-3.csv · daily, no individual hotspots
| fecha | focos_viirs | frp_mw | tmax_c | tmin_c | hr_min_pct | viento_max_kmh | racha_max_kmh | precip_mm | fwi | clase_fwi | dentro_del_incendio |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2017-10-05 | 22 | 2,221 | 35 | 22.7 | 24 | 22.7 | 51.8 | 0 | 69.9 | extremo | 1 |
| 2017-10-06 | 33 | 643 | 35.2 | 22.1 | 26 | 18.5 | 43.2 | 0 | 56.8 | extremo | 1 |
| 2017-10-07 | 8 | 119 | 35.2 | 22.4 | 29 | 20.3 | 44.6 | 0 | 55.3 | extremo | 1 |
| 2017-10-08 | 27 | 269 | 35.3 | 22.5 | 24 | 19.4 | 43.9 | 0 | 56.2 | extremo | 1 |
| 2017-10-09 | 14 | 155 | 35.3 | 22.6 | 28 | 19.9 | 42.5 | 0 | 50.9 | extremo | 1 |
| 2017-10-10 | 4 | 52 | 35.1 | 22.4 | 27 | 19.4 | 43.2 | 0 | 50.1 | extremo | 1 |
| 2017-10-11 | 9 | 39 | 35.9 | 22.6 | 27 | 18.1 | 41.8 | 0 | 51.1 | extremo | 1 |
| 2017-10-12 | 12 | 104 | 36.4 | 23.4 | 25 | 18.7 | 42.1 | 0 | 51.3 | extremo | 1 |
| 2017-10-13 | 38 | 812 | 36.3 | 23.2 | 24 | 18.2 | 41 | 0 | 50.7 | extremo | 1 |
| 2017-10-14 | 47 | 975 | 37.5 | 23.7 | 26 | 18 | 41.4 | 0 | 50.1 | extremo | 1 |
| 2017-10-15 | 8 | 128 | 38.1 | 24.5 | 26 | 16 | 40 | 0 | 49.6 | muy_alto | 1 |
| 2017-10-16 | 37 | 355 | 36.8 | 25.1 | 27 | 20.2 | 45 | 0 | 59.1 | extremo | 1 |
| 2017-10-17 | 35 | 277 | 34.4 | 22.5 | 27 | 20.7 | 46.8 | 0 | 60.4 | extremo | 1 |
| 2017-10-18 | 12 | 235 | 35.6 | 21.9 | 27 | 18.9 | 43.6 | 0 | 58.3 | extremo | 1 |
| 2017-10-19 | 2 | 9 | 35.1 | 21.6 | 33 | 23.5 | 50 | 0.1 | 59.1 | extremo | 1 |
| 2017-10-20 | 0 | 0 | 36.8 | 23.7 | 26 | 18.8 | 43.6 | 0 | 58.2 | extremo | 1 |
| 2017-10-21 | 0 | 0 | 37.5 | 24.1 | 24 | 22 | 49 | 0 | 66.6 | extremo | 1 |
| 2017-10-22 | 1 | 6 | 36.9 | 24.2 | 23 | 19.7 | 47.2 | 0 | 68 | extremo | 1 |
| 2017-10-23 | 0 | 0 | 37.1 | 23.8 | 22 | 17.7 | 43.9 | 0 | 57.1 | extremo | 0 |
| 2017-10-24 | 0 | 0 | 36.7 | 23.8 | 24 | 19.5 | 45 | 0 | 63.2 | extremo | 0 |
| 2017-10-25 | 0 | 0 | 37.2 | 23.8 | 25 | 21.6 | 45.7 | 0 | 63.3 | extremo | 0 |
| 2017-10-26 | 0 | 0 | 36.9 | 23.5 | 28 | 20.6 | 46.4 | 0 | 61.9 | extremo | 0 |
| 2017-10-27 | 0 | 0 | 37.3 | 23.9 | 26 | 17.5 | 39.6 | 0 | 55.2 | extremo | 0 |
| 2017-10-28 | 0 | 0 | 35.8 | 25.2 | 30 | 19.7 | 45.7 | 0 | 48.1 | muy_alto | 0 |
| 2017-10-29 | 0 | 0 | 38.7 | 25.3 | 23 | 17.2 | 41 | 0 | 56.2 | extremo | 0 |
| 2017-10-30 | 0 | 0 | 36.7 | 27.5 | 32 | 13 | 31 | 0 | 48.2 | muy_alto | 0 |
| 2017-10-31 | 0 | 0 | 32.2 | 24.4 | 45 | 15.5 | 39.2 | 6 | 18.1 | moderado | 0 |
It is generated in your browser from this page’s data: one file per fire, aggregated by day and without individual hotspots.
Live widget for your story
It updates itself while the fire is still active and links to this page. Free, with the attribution shown at the bottom.
Sources for this page: GWIS (Copernicus), NASA FIRMS (VIIRS), ERA5 (ECMWF/Copernicus C3S) · Open-Meteo.com (CC BY 4.0), GHSL (JRC). Open-Meteo.com · How we build fire pages: methodology
- Burnt area
- 6,047ha
- GWIS perimeter (Copernicus)
- Duration
- 18days
- 5 Oct 2017 – 22 Oct 2017
- Municipalities hit
- 2
- municipalities
- Started on
- 5 Oct
- 2017
- Heat detections
- 309
- in a single hotspot: 491 MW
- Danger at start
- 70
- Extreme · FWI index
- Average daily power
- 400MW
- detected power per day, on average
Where it burned
HOTSPOTS BY DAY
5 Oct22 Oct
22 Oct 2017
How it evolved, day by day
5 Oct
9 Oct
13 Oct
17 Oct
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
38°high
52km/h · peak gust
23%lowest humidity
It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 6.0 mm on 31 Oct.
This area had burned before
No earlier perimeters overlap this fire since 2016, when the satellite record begins.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Morro Cabeça no Tempo 4,377 inhabitants4,906 ha reached on 5 Oct2.2 %
-
1,179 ha reached on 5 Oct0.1 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2015Built-up area< 0.1 ha
Residents< 20
Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
Started with Strong wind: 3.2 % of the area in Brazil 60 days without rain: 55 % of the area in Brazil
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 5 Oct | 35.0 °C | 24 % | 52 km/h | 0.0 mm | Extreme 70 |
| 6 Oct | 35.2 °C | 26 % | 43 km/h | 0.0 mm | Extreme 57 |
| 7 Oct | 35.2 °C | 29 % | 45 km/h | 0.0 mm | Extreme 55 |
| 8 Oct | 35.3 °C | 24 % | 44 km/h | 0.0 mm | Extreme 56 |
| 9 Oct | 35.3 °C | 28 % | 42 km/h | 0.0 mm | Extreme 51 |
| 10 Oct | 35.1 °C | 27 % | 43 km/h | 0.0 mm | Extreme 50 |
| 11 Oct | 35.9 °C | 27 % | 42 km/h | 0.0 mm | Extreme 51 |
| 12 Oct | 36.4 °C | 25 % | 42 km/h | 0.0 mm | Extreme 51 |
| 13 Oct | 36.3 °C | 24 % | 41 km/h | 0.0 mm | Extreme 51 |
| 14 Oct | 37.5 °C | 26 % | 41 km/h | 0.0 mm | Extreme 50 |
| 15 Oct | 38.1 °C | 26 % | 40 km/h | 0.0 mm | Very high 50 |
| 16 Oct | 36.8 °C | 27 % | 45 km/h | 0.0 mm | Extreme 59 |
| 17 Oct | 34.4 °C | 27 % | 47 km/h | 0.0 mm | Extreme 60 |
| 18 Oct | 35.6 °C | 27 % | 44 km/h | 0.0 mm | Extreme 58 |
| 19 Oct | 35.1 °C | 33 % | 50 km/h | 0.1 mm | Extreme 59 |
| 20 Oct | 36.8 °C | 26 % | 44 km/h | 0.0 mm | Extreme 58 |
| 21 Oct | 37.5 °C | 24 % | 49 km/h | 0.0 mm | Extreme 67 |
| 22 Oct | 36.9 °C | 23 % | 47 km/h | 0.0 mm | Extreme 68 |
| 23 Oct after | 37.1 °C | 22 % | 44 km/h | 0.0 mm | Extreme 57 |
| 24 Oct after | 36.7 °C | 24 % | 45 km/h | 0.0 mm | Extreme 63 |
| 25 Oct after | 37.2 °C | 25 % | 46 km/h | 0.0 mm | Extreme 63 |
| 26 Oct after | 36.9 °C | 28 % | 46 km/h | 0.0 mm | Extreme 62 |
| 27 Oct after | 37.3 °C | 26 % | 40 km/h | 0.0 mm | Extreme 55 |
| 28 Oct after | 35.8 °C | 30 % | 46 km/h | 0.0 mm | Very high 48 |
| 29 Oct after | 38.7 °C | 23 % | 41 km/h | 0.0 mm | Extreme 56 |
| 30 Oct after | 36.7 °C | 32 % | 31 km/h | 0.0 mm | Very high 48 |
| 31 Oct after | 32.2 °C | 45 % | 39 km/h | 6.0 mm | Moderate 18 |
Its twins: fires that started in the same weather
It started with an FWI of 69.9, a minimum humidity of 24% and more than two months without rain. Fires in the area that started in weather like this since 2016: 32.
FWI at the start
69.9
Minimum humidity
24 %
Days without rain
60+
this fire
chosen twins
rest of the area
Almost identicalSimilar
Outlines of the closest twins
This fire · Pilão Arcado fire, 5 October 2017
6,047 ha
18 days
FWI 69.9
Min. humidity 24 %
Pilão Arcado fire, August 2016
20,542 ha
34 days
FWI 68.0
Min. humidity 26 %
28 km away, in 2016
First rain (1 mm or more) after it ended: 1.7 mm on 26 Sept.
Canto do Buriti fire, September 2018
16,013 ha
33 days
FWI 68.8
Min. humidity 23 %
154 km away, in 2018
First rain (1 mm or more) after it ended: 13.7 mm on 16 Oct.
Cristino Castro fire, September 2018
15,474 ha
33 days
FWI 67.6
Min. humidity 22 %
111 km away, in 2018
First rain (1 mm or more) after it ended: 20.1 mm on 16 Oct.
Morro Cabeça no Tempo fire, September 2024
5,360 ha
28 days
FWI 68.1
Min. humidity 20 %
34 km away, in 2024
First rain (1 mm or more) after it ended: 2.3 mm on 17 Oct.
Jurema fire, September 2025
5,901 ha
13 days
FWI 67.1
Min. humidity 21 %
137 km away, in 2025
First rain (1 mm or more) after it ended: none in the following ten days.
What happened to them
- 15 days
- median duration
- 9,552 ha
- median area
- 50 %
- went past 10,000 ha
- 2.3 mm
- rain at the end (median; 15 of 32 had it)
It stayed below its twins: 6,047 ha against a median of 9,552 ha. It lasted 18 days, against 15 days.
In 17 of 32, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.3 mm.
This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it
How it ended
6.0 mmfirst rain
31 Oct9 days after it ended
52km/h · max. gust
It was considered over on 22 Oct, and on 31 Oct 6.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 15 of 32, with a median of 2.3 mm.
Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
How a twin is chosen
- Same area: fires that have already ended, less than 250 km from this one, since 2016.
- Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
- Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
- Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
- They are sorted by similarity, and the outlines of the first five are drawn.
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
↔
Before · 28 Sept 2017
After · 29 Oct 2017
Sentinel-2 did not pass over on that day. Try another date, or use false colour, which is daily.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 309Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV
Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 19,219 haPilão ArcadoOctober 2023 · 18 days · 10 km away
- 18,758 haPilão Arcado26 September 2025 · 15 days · 21 km away
- 62,591 haPilão ArcadoSeptember 2020 · 27 days · 23 km away
- 20,506 haMorro Cabeça no TempoAugust 2018 · 22 days · 23 km away
- 120,828 haMorro Cabeça no TempoSeptember 2021 · 39 days · 26 km away
- 20,542 haPilão ArcadoAugust 2016 · 34 days · 28 km away
Frequently asked questions
- How long did the Pilão Arcado fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 5 October 2017 to 22 October 2017 (18 days). The perimeter dates it from 5 October 2017 to 18 October 2017.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,047 hectares (60.5 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 2 municipalities: Morro Cabeça no Tempo (4,906 ha, 2.2 %); Pilão Arcado (1,179 ha, 0.1 %).
- What was the weather like?
- During the fire the temperature reached 38.1 °C, humidity dropped to 23 % and gusts hit 52 km/h. The fire danger index (FWI) reached 70, class Extreme.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
- How did the fires that started in similar weather in this area end?
- Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 32. Their median duration was 15 days and their median area 9,552 ha; 50 % went past 10,000 ha. In 17 of 32, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.3 mm.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 193 · Emergency number and official warnings
Satellite cross-check
History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
- Last day with fire: 18 October 2017 → 22 October 2017.
RSS Changes to this page With cross-checks and a citable version
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates adjusted with the VIIRS detections inside the perimeter, which said 5 October 2017 to 18 October 2017. 309 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.