Skip to content
worldfires
BR · Brazil · –

Paranaíta fire, September 2017 Paranaíta

Out · last detection

The fire started on in Paranaíta, Brazil, and satellites saw it burning for 16 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,810 hectares from heat detections, spread across a single municipality.

It is number 1071 by size of the 1872 fires with a page that started in Mato Grosso since 2016. Number 502 in Brazil in 2017, of 994.

Burnt area
4,810ha
GWIS perimeter (Copernicus)
Duration
16days
3 Sept 2017 – 18 Sept 2017
Municipalities hit
1
municipalities
Started on
3 Sept
2017
Heat detections
289
in a single hotspot: 87 MW
Danger at start
49
Very high · FWI index
Average daily power
185MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 3 Sept18 Sept
18 Sept 2017

How it evolved, day by day

3 Sept 2017 · 375 MW · 12 4 Sept 2017 · 110 MW · 12 5 Sept 2017 · 512 MW · 55 6 Sept 2017 · 95 MW · 25 7 Sept 2017 · 497 MW · 52 8 Sept 2017 · 131 MW · 43 9 Sept 2017 · 286 MW · 26 10 Sept 2017 · 72 MW · 7 11 Sept 2017 · 29 MW · 3 12 Sept 2017 · 341 MW · 9 13 Sept 2017 · 237 MW · 21 14 Sept 2017 · 6 MW · 4 16 Sept 2017 · 58 MW · 6 17 Sept 2017 · 4 MW · 1 18 Sept 2017 · 20 MW · 13
5 Sept 9 Sept 12 Sept 16 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
39km/h · peak gust
16%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 1.0 mm on 24 Sept.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 3% of the area of London (48 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Paranaíta 11,671 inhabitants where it started
    4,840 ha reached on 3 Sept
    1.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area0.90 ha
Residents< 20

Inside the perimeter there were about 0.90 hectares of built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
3 Sept 36.0 °C 24 % 32 km/h 0.0 mm Very high 49
4 Sept 35.3 °C 23 % 33 km/h 0.0 mm Extreme 52
5 Sept 35.6 °C 23 % 37 km/h 0.0 mm Extreme 53
6 Sept 35.7 °C 24 % 32 km/h 0.0 mm Extreme 55
7 Sept 34.9 °C 33 % 24 km/h 0.0 mm Very high 43
8 Sept 36.4 °C 28 % 26 km/h 0.0 mm Very high 43
9 Sept 34.4 °C 31 % 27 km/h 0.0 mm Very high 42
10 Sept 35.8 °C 31 % 31 km/h 0.0 mm Very high 44
11 Sept 36.0 °C 32 % 23 km/h 0.0 mm Very high 40
12 Sept 36.8 °C 26 % 33 km/h 0.0 mm Very high 48
13 Sept 36.0 °C 27 % 30 km/h 0.0 mm Very high 48
14 Sept 34.2 °C 30 % 18 km/h 0.0 mm Very high 39
15 Sept 35.0 °C 31 % 23 km/h 0.0 mm Very high 42
16 Sept 37.9 °C 16 % 39 km/h 0.0 mm Extreme 69
17 Sept 34.1 °C 29 % 39 km/h 0.0 mm Extreme 53
18 Sept 35.3 °C 23 % 28 km/h 0.0 mm Extreme 50
19 Sept after 35.5 °C 25 % 32 km/h 0.0 mm Very high 49
20 Sept after 34.3 °C 37 % 24 km/h 0.0 mm High 36
21 Sept after 33.5 °C 38 % 33 km/h 0.4 mm Very high 43
22 Sept after 34.0 °C 35 % 33 km/h 0.0 mm High 38
23 Sept after 35.0 °C 34 % 23 km/h 0.0 mm High 37
24 Sept after 34.0 °C 42 % 23 km/h 1.0 mm High 34

Its twins: fires that started in the same weather

It started with an FWI of 48.9, a minimum humidity of 24% and more than two months without rain. Fires in the area that started in weather like this since 2016: 26.

FWI at the start 48.9
Minimum humidity 24 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Nova Monte Verde fire, September 2020
3,145 ha 16 days FWI 48.4 Min. humidity 25 % 19 km away, in 2020

First rain (1 mm or more) after it ended: 3.1 mm on 25 Sept.

What happened to them

17 days
median duration
5,964 ha
median area
27 %
went past 10,000 ha
1.6 mm
rain at the end (median; 14 of 26 had it)

It burned an area similar to its twins (4,810 ha against a median of 5,964 ha) and lasted 16 days, against 17 days.

In 12 of 26, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.0 mmfirst rain
24 Sept6 days after it ended
39km/h · max. gust

It was considered over on 18 Sept, and on 24 Sept 1.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 14 of 26, with a median of 1.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 27 Aug 2017
After · 25 Sept 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 289Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Paranaíta fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 3 September 2017 to 18 September 2017 (16 days). The perimeter dates it from 3 September 2017 to 11 September 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,810 hectares (48.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Paranaíta (4,840 ha, 1.0 %).
What was the weather like?
During the fire the temperature reached 37.9 °C, humidity dropped to 16 % and gusts hit 39 km/h. The fire danger index (FWI) reached 69, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 26. Their median duration was 17 days and their median area 5,964 ha; 27 % went past 10,000 ha. In 12 of 26, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 11 September 2017 → 18 September 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 3 September 2017 to 11 September 2017. 289 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.