Skip to content
worldfires
BR · Brazil · →

Apiacás fire, 9 August 2024 Apiacás

Out · last detection 18 Sept 2024, 04:33 UTC

The fire started on 9 August 2024 in Apiacás, Brazil, and satellites saw it burning for 41 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 26,278 hectares from heat detections, spread across a single municipality.

It is the 130th largest in Mato Grosso since 2016 (of 1996 with a page). Number 110 in Brazil in 2024, of 1301.

Compare with…
Burnt area
26,278ha
GWIS perimeter (Copernicus)
Duration
41days
9 Aug 2024 – 18 Sept 2024
Municipalities hit
1
municipalities
Started on
9 Aug
2024
Heat detections
3,089
in a single hotspot: 261 MW
Danger at start
45
Very high · FWI index
Average daily power
862MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 9 Aug18 Sept
18 Sept 2024

How it evolved, day by day

9 Aug 2024 · 231 MW · 8 10 Aug 2024 · 339 MW · 19 11 Aug 2024 · 974 MW · 46 12 Aug 2024 · 2,452 MW · 85 13 Aug 2024 · 4,151 MW · 214 14 Aug 2024 · 2,504 MW · 250 15 Aug 2024 · 356 MW · 110 16 Aug 2024 · 172 MW · 57 17 Aug 2024 · 120 MW · 5 18 Aug 2024 · 35 MW · 4 19 Aug 2024 · 14 MW · 5 20 Aug 2024 · 543 MW · 32 21 Aug 2024 · 558 MW · 62 22 Aug 2024 · 2,015 MW · 59 23 Aug 2024 · 626 MW · 74 24 Aug 2024 · 366 MW · 42 25 Aug 2024 · 263 MW · 55 26 Aug 2024 · 826 MW · 128 27 Aug 2024 · 1,056 MW · 109 28 Aug 2024 · 4,064 MW · 105 29 Aug 2024 · 676 MW · 153 30 Aug 2024 · 1,998 MW · 169 31 Aug 2024 · 2,425 MW · 296 1 Sept 2024 · 3,455 MW · 265 2 Sept 2024 · 1,554 MW · 171 3 Sept 2024 · 287 MW · 57 4 Sept 2024 · 89 MW · 26 5 Sept 2024 · 820 MW · 83 6 Sept 2024 · 940 MW · 149 7 Sept 2024 · 56 MW · 22 8 Sept 2024 · 10 MW · 1 9 Sept 2024 · 385 MW · 7 10 Sept 2024 · 104 MW · 33 11 Sept 2024 · 223 MW · 71 12 Sept 2024 · 84 MW · 27 13 Sept 2024 · 17 MW · 8 14 Sept 2024 · 52 MW · 7 15 Sept 2024 · 23 MW · 2 16 Sept 2024 · 38 MW · 12 17 Sept 2024 · 390 MW · 40 18 Sept 2024 · 59 MW · 21
9 Aug 13 Aug 15 Aug 21 Aug 27 Aug 2 Sept 8 Sept 14 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
58km/h · peak gust
16%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 25.8 mm on 19 Sept.

This area had burned before

64% of the perimeter overlaps earlier fires recorded since 2016: 1,504 ha in 2017, 810 ha in 2018, 897 ha in 2019, 5,167 ha in 2020, 5,858 ha in 2021, 20,698 ha in 2022, 10,238 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 16,729 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 17% of the area of London (263 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Apiacás 8,590 inhabitants where it started
    26,503 ha reached on 9 Aug
    1.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.15 ha
Residents< 20

Inside the perimeter there were about 0.15 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
9 Aug 36.4 °C 18 % 30 km/h 0.0 mm Very high 45
10 Aug 30.0 °C 34 % 35 km/h 0.0 mm Very high 40
11 Aug 34.2 °C 29 % 26 km/h 0.0 mm High 35
12 Aug 35.3 °C 22 % 33 km/h 0.0 mm Very high 39
13 Aug 35.6 °C 20 % 31 km/h 0.0 mm Very high 43
14 Aug 36.9 °C 23 % 34 km/h 0.0 mm Very high 44
15 Aug 35.5 °C 30 % 40 km/h 0.1 mm Very high 44
16 Aug 32.7 °C 42 % 26 km/h 1.7 mm Moderate 17
17 Aug 33.6 °C 39 % 21 km/h 0.1 mm High 26
18 Aug 35.3 °C 33 % 28 km/h 0.2 mm High 31
19 Aug 34.1 °C 33 % 26 km/h 0.0 mm High 31
20 Aug 35.0 °C 28 % 30 km/h 0.0 mm High 35
21 Aug 35.2 °C 28 % 30 km/h 0.0 mm High 34
22 Aug 36.1 °C 27 % 29 km/h 0.0 mm High 35
23 Aug 35.7 °C 29 % 30 km/h 0.0 mm High 36
24 Aug 33.6 °C 40 % 29 km/h 0.0 mm High 31
25 Aug 33.9 °C 32 % 33 km/h 0.0 mm High 36
26 Aug 30.7 °C 37 % 34 km/h 0.0 mm High 36
27 Aug 34.7 °C 28 % 24 km/h 0.0 mm High 32
28 Aug 36.6 °C 23 % 33 km/h 0.0 mm Very high 40
29 Aug 34.2 °C 34 % 43 km/h 0.1 mm Very high 42
30 Aug 34.9 °C 25 % 40 km/h 0.0 mm Very high 41
31 Aug 35.7 °C 28 % 34 km/h 0.0 mm Very high 39
1 Sept 37.0 °C 20 % 41 km/h 0.0 mm Very high 47
2 Sept 36.7 °C 22 % 36 km/h 0.0 mm Very high 44
3 Sept 33.9 °C 38 % 32 km/h 0.2 mm High 35
4 Sept 37.2 °C 18 % 38 km/h 0.0 mm Very high 47
5 Sept 37.9 °C 16 % 36 km/h 0.0 mm Very high 48
6 Sept 37.0 °C 16 % 33 km/h 0.0 mm Very high 48
7 Sept 36.3 °C 21 % 37 km/h 0.0 mm Very high 48
8 Sept 36.9 °C 22 % 41 km/h 0.0 mm Extreme 52
9 Sept 37.9 °C 19 % 44 km/h 0.0 mm Extreme 55
10 Sept 34.5 °C 34 % 36 km/h 0.2 mm Very high 40
11 Sept 34.8 °C 34 % 35 km/h 0.6 mm High 32
12 Sept 37.0 °C 25 % 28 km/h 0.0 mm Very high 38
13 Sept 36.6 °C 29 % 31 km/h 0.0 mm High 38
14 Sept 35.0 °C 41 % 32 km/h 0.9 mm High 27
15 Sept 34.2 °C 40 % 27 km/h 0.0 mm High 28
16 Sept 35.0 °C 39 % 35 km/h 0.1 mm High 32
17 Sept 37.4 °C 27 % 27 km/h 0.0 mm High 35
18 Sept 35.3 °C 37 % 58 km/h 0.5 mm Very high 40
19 Sept after 29.5 °C 60 % 32 km/h 25.8 mm Very low 3

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 2 Aug 2024
After · 25 Sept 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 14 August 2024 the air beside the fire reached 472 µg/m³ of PM2.5. That day averaged 273: 18 times the WHO daily guideline (15).

PM2.5 peak472 µg/m³
Days over the guideline46 days
PM10674 µg/m³
Optical depth4.14
78910111213141516171819202122232425262728293031123456789101112131415161718192021
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 3,089Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil ›

Frequently asked questions

How long did the Apiacás fire last?
GWIS (Copernicus) dates it between 9 August 2024 and 18 September 2024: 41 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 26,278 hectares (262.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Apiacás (26,503 ha, 1.3 %).
What was the weather like?
During the fire the temperature reached 37.9 °C, humidity dropped to 16 % and gusts hit 58 km/h. The fire danger index (FWI) reached 55, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings ›

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

No changes since 24 October 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 3,089 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.