Pampilhosa da Serra fire, October 2017
Fajão-Vidual, União das Freguesias de Cepos e Teixeira, Piódão
Out · last detection 10 Oct 2017, 14:32 UTC
The fire started on 7 October 2017 in Fajão-Vidual, Portugal, and satellites saw it burning for 4 days. Copernicus mapped a burnt perimeter of 8,372 hectares from satellite imagery, spread across 8 freguesias. According to ICNF, it was detected on 6 October 2017 at 23:21 and declared extinguished on 11 October 2017.
This is an index computed from weather model data, not a measurement of the fire nor an official warning. Danger warnings are issued by each country’s authority. Emergency number and official warnings ›
Weather during the fire
model
27.8°C · 11% RH
High of 27.8 °C and minimum humidity of 11% on 7 October 2017; gusts of 35 km/h on 7 October 2017.
These are model values for a cell of about 25 km, not from a weather station: they may differ from what was measured on the ground.
Living inside
model
≈ 250people
Estimated residents inside the perimeter and 10 ha of built-up area (100 m grid, epoch 2015).
Source
GHSL R2023A · JRC
Date
calculated on 24 October 2026
+− cross-check
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
ⓘThis page’s change log has been kept since 24 October 2026: every night what it publishes is compared and the difference is logged. Anything earlier is reconstructed from each source’s date and marked as reconstructed.
Show
· reconstructedofficial
Matched with the official ICNF record
Matches: 7,456 ha in the official record (records: 1).
A version keeps the area, dates, name and official record; the area as it was logged (changes under 2% are not logged). The map, hotspots and weather always show today’s data.
Citation
A lede of about 60 words figures only, no adjectives
Burnt area inside each freguesia, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
Natura 2000 sites (European Environment Agency, 2024 release) crossed by the perimeter.
Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.
People and buildings inside the perimeter
GHSL 2015
Built-up area10ha
Residents≈ 250
Inside the perimeter there were about 10 hectares of built-up land and about 250 residents (GHSL 2015, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
It started with an FWI of 48.4, a minimum humidity of 11% and 38 days without rain. Fires in the area that started in weather like this since 2016: 37.
FWI at the start48.4
Minimum humidity11 %
Days without rain38
this firechosen twinsrest of the area
Almost identicalSimilar
Outlines of the closest twins
This fire · Pampilhosa da Serra fire, October 2017
8,372 ha4 daysFWI 48.4Min. humidity 11 %
Gouveia fire, August 2016
103 ha2 daysFWI 48.1Min. humidity 9 %49 km away, in 2016
First rain (1 mm or more) after it ended: none in the following ten days.
It was 17.2 times larger than the median of its twins and lasted 4 days, against 2 days.
Only 3 of its 37 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 30 of 37, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.
This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it
How it ended
3.0 mmfirst rain
16 Oct6 days after it ended
35km/h · max. gust
It was considered over on 10 Oct, and on 16 Oct 3.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 7 of 37, with a median of 3.0 mm.
Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
How a twin is chosen
Same area: fires that have already ended, less than 250 km from this one, since 2016.
Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
They are sorted by similarity, and the outlines of the first five are drawn.
Drag the line to compare the same ground before the fire and after it.
↔
Before · 30 Sept 2017
After · 17 Oct 2017
Sentinel-2 did not pass over on that day. Try another date, or use false colour, which is daily.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · Copernicus
On 9 October 2017 the air beside the fire reached 285 µg/m³ of PM2.5. That day averaged 172: 12 times the WHO daily guideline (15).
PM2.5 peak285µg/m³
Days over the guideline9days
PM10281µg/m³
WHO 15
5 Oct8 Oct11 Oct14 Oct17 Oct
GoodFairModeratePoorVery poorExtremely poor
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table· 514Every satellite heat detection, one by one, with time, satellite, power and coordinates.›
⬇ Download CSVTimes in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
According to the heat detections seen by satellite inside the perimeter, it burned from 7 October 2017 to 10 October 2017 (4 days). The perimeter dates it from 8 October 2017 to 10 October 2017. According to ICNF, it was detected on 6 October 2017 at 23:21 and declared extinguished on 11 October 2017.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 8,372 hectares (83.7 km²). Official national figures may differ.
Which freguesias burned?
The fire entered 8 freguesias: Fajão-Vidual (4,442 ha, 55 %); União das Freguesias de Cepos e Teixeira (2,301 ha, 70 %); Piódão (471 ha, 13 %); Folques (271 ha, 15 %); Unhais-o-Velho (259 ha, 6.6 %); Benfeita (258 ha, 12 %); União das freguesias de Cerdeira e Moura da Serra (227 ha, 12 %); Cabril (154 ha, 4.4 %).
Did the fire reach a town?
The fire started in Fajão-Vidual and reached its centre: the point marking it was inside the burnt area or less than 500 metres from it. That does not mean houses burned.
What was the weather like?
During the fire the temperature reached 27.8 °C, humidity dropped to 11 % and gusts hit 35 km/h. The fire danger index (FWI) reached 48, class Very high.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Portugal (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 37. Their median duration was 2 days and their median area 488 ha; 32 % went past 1,000 ha. Only 3 of its 37 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 30 of 37, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
⚑Report an errorHow we know this›
Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
Dates adjusted with the VIIRS detections inside the perimeter, which said 8 October 2017 to 10 October 2017. 514 Suomi-NPP VIIRS detections on those dates.
Compared with ICNF: 7,456 official ha against 8,372 ha of perimeter; they agree within 25%.
Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Freguesia boundaries come from geoBoundaries ADM3 (CC0 1.0 Universal (CC0 1.0) Public Domain Dedication). The area per freguesia is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.