Skip to content
worldfires
CA · Canada · –

Mountain (South) fire, 17 May 2020 Mountain (South)

Out · last detection 19 May 2020, 20:29 UTC

The fire started on 17 May 2020 in Mountain (South), Canada, and satellites saw it burning for 3 days. Canada’s CWFIS (Natural Resources Canada) mapped an official burnt perimeter of 1,215 hectares from satellite imagery, spread across a single census subdivision.

It is the 196th largest in Manitoba since 2016 (of 223 with a page). Number 29 in Canada in 2020, of 31.

The power measured by the satellite is low (24.0 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
1,215ha
official perimeter (CWFIS)
Duration
3days
17 May 2020 – 19 May 2020
Census subdivisions hit
1
municipalities
Started on
17 May
2020
Heat detections
33
in a single hotspot: 24 MW
Danger at start
38
Very high · FWI index
Average daily power
139MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 17 May19 May
19 May 2020

How it evolved, day by day

17 May 2020 · 48 MW · 2 19 May 2020 · 230 MW · 31
17 May 19 May

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

29°high
60km/h · peak gust
12%lowest humidity

It had gone 15 days without rain (1 mm or more) when it started. Rain came after the fire: 1.7 mm on 28 May.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 0.8% of the area of London (12 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each census subdivision

  1. Mountain (South) where it started
    1,209 ha reached on 17 May
    0.8 %

Burnt area inside each census subdivision, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Strong wind: 15 % of the area in Canada Very dry air: 9.3 % of the area in Canada

Day High Min. humidity Peak gust Rain Danger (FWI)
17 May 26.5 °C 12 % 55 km/h 0.0 mm Very high 38
18 May 26.0 °C 19 % 60 km/h 0.2 mm Very high 43
19 May 29.4 °C 24 % 50 km/h 0.0 mm High 36
20 May after 19.5 °C 49 % 38 km/h 0.0 mm Moderate 18
21 May after 24.6 °C 47 % 44 km/h 0.0 mm Moderate 20
22 May after 27.8 °C 16 % 40 km/h 0.0 mm High 26
23 May after 24.4 °C 23 % 45 km/h 0.9 mm Moderate 16
24 May after 19.7 °C 38 % 29 km/h 0.0 mm Moderate 15
25 May after 23.8 °C 17 % 35 km/h 0.0 mm High 24
26 May after 26.5 °C 19 % 34 km/h 0.6 mm High 30
27 May after 21.3 °C 20 % 74 km/h 0.0 mm Very high 47
28 May after 11.4 °C 65 % 52 km/h 1.7 mm Low 8

Its twins: fires that started in the same weather

It started with an FWI of 38.4, a minimum humidity of 12% and 15 days without rain. Fires in the area that started in weather like this since 2018: 5.

FWI at the start 38.4
Minimum humidity 12 %
Days without rain 15
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Ethelbert fire, May 2021
7,270 ha 4 days FWI 33.6 Min. humidity 14 % 28 km away, in 2021

First rain (1 mm or more) after it ended: 7.0 mm on 21 May.

What happened to them

Fires in the area that started in similar weather: 5. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.7 mmfirst rain
28 May9 days after it ended
60km/h · max. gust

It was considered over on 19 May, and on 28 May 1.7 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2018.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 10 May 2020
After · 26 May 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 33Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Canada

Frequently asked questions

How long did the Mountain (South) fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 17 May 2020 to 19 May 2020 (3 days). The perimeter dates it from 22 May 2020 to 19 May 2020.
How much area did it burn?
The official perimeter mapped by Canada’s CWFIS (Natural Resources Canada) is 1,215 hectares (12.2 km²). Other tallies, such as those of provincial agencies, may give slightly different figures.
Which census subdivisions burned?
The fire only entered Mountain (South) (1,209 ha, 0.8 %).
What was the weather like?
During the fire the temperature reached 29.4 °C, humidity dropped to 12 % and gusts hit 60 km/h. The fire danger index (FWI) reached 43, class Very high.
Where does this data come from?
From the official burnt perimeter of Canada’s CWFIS (NBAC, Natural Resources Canada) or, for the current season and until NBAC publishes it, the one rebuilt by GWIS (Copernicus); from NASA FIRMS VIIRS hotspots; and from the administrative boundaries of Canada. It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: NBAC (Natural Resources Canada), official.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 22 May 2020 to 19 May 2020. 33 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter is official: it comes from the National Burned Area Composite (NBAC) of the Canadian Wildland Fire Information System (CWFIS), Natural Resources Canada, which maps it on satellite imagery and publishes it under the Open Government Licence – Canada. Until NBAC publishes the current season, this year’s fires carry the perimeter rebuilt from heat detections by GWIS (Copernicus, CC BY 4.0), which is approximate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Census subdivision boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per census subdivision is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.