Skip to content
worldfires
PT · Portugal · –

Mesao Frio fire, August 2022 Sedielos, Vila Marim, Mesão Frio (Santo André)

Out · last detection

The fire started on in Vila Marim, Portugal, and satellites saw it burning for 4 days. Copernicus mapped a burnt perimeter of 470 hectares from satellite imagery, spread across 4 freguesias. According to ICNF, it was detected on 21 August 2022 at 15:02 and declared extinguished on 24 August 2022.

Also known as: Vila Marim fire, August 2022.

Number 28 in Portugal in 2022, of 107.

Burnt area
470ha
Copernicus perimeter
Duration
4days
21 Aug 2022 – 24 Aug 2022
Freguesias hit
4
freguesias
Started on
21 Aug
2022
Heat detections
33
in a single hotspot: 124 MW
Danger at start
36
High · FWI index
Average daily power
235MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 21 Aug24 Aug
24 Aug 2022

How it evolved, day by day

21 Aug 2022 · 610 MW · 5 22 Aug 2022 · 219 MW · 12 23 Aug 2022 · 107 MW · 15 24 Aug 2022 · 6 MW · 1
21 Aug 22 Aug 23 Aug 24 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

31°high
41km/h · peak gust
35%lowest humidity

It had gone 4 days without rain (1 mm or more) when it started.

This area had burned before

23% of the perimeter overlaps earlier fires recorded since 2016: 7 ha in 2016, 98 ha in 2017, 3 ha in 2021.

What happened to each freguesia

  1. Sedielos 750 inhabitants · 1.2 km from the centre
    244 ha reached on 22 Aug
    19 %
  2. Vila Marim 915 inhabitants · fire reached the centre where it started
    136 ha reached on 21 Aug
    16 %
  3. Mesão Frio (Santo André) 1,615 inhabitants · 0.8 km from the centre
    88 ha reached on 21 Aug
    12 %
  4. Teixeira e Teixeiró 723 inhabitants · 2.6 km from the centre
    3 ha
    0.1 %

Burnt area inside each freguesia, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Other natural land52 %
  • Scrub and transitional woodland28 %
  • Mixed forest11 %
  • Agricultural areas8.4 %

Natura 2000 protected area affected: 30 %

Natura 2000 sites (European Environment Agency, 2024 release) crossed by the perimeter.

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.82 ha
Residents≈ 30

Inside the perimeter there were about 0.82 hectares of built-up land and about 30 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

Official record

According to ICNF, this fire started on 21 August 2022 and burned 433 ha (the satellite measured 470 ha).

ICNF (Instituto da Conservação da Natureza e das Florestas). This is the agency’s operational record: its figures may be revised when the year’s statistics are closed.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
21 Aug 26.0 °C 38 % 41 km/h 0.0 mm High 36
22 Aug 29.7 °C 37 % 30 km/h 0.0 mm High 34
23 Aug 30.7 °C 35 % 35 km/h 0.2 mm High 29
24 Aug 26.3 °C 49 % 37 km/h 0.0 mm High 28
25 Aug after 28.5 °C 39 % 22 km/h 0.0 mm High 22
26 Aug after 28.0 °C 39 % 43 km/h 0.0 mm High 26
27 Aug after 26.7 °C 40 % 29 km/h 0.0 mm High 26
28 Aug after 27.4 °C 38 % 33 km/h 0.0 mm High 29
29 Aug after 24.7 °C 45 % 36 km/h 0.0 mm High 27
30 Aug after 22.3 °C 47 % 35 km/h 0.0 mm High 24
31 Aug after 21.5 °C 51 % 37 km/h 0.0 mm High 24
1 Sept after 21.8 °C 52 % 38 km/h 0.0 mm High 26
2 Sept after 19.6 °C 55 % 37 km/h 0.0 mm High 23
3 Sept after 20.2 °C 42 % 37 km/h 0.0 mm High 26

Its twins: fires that started in the same weather

It started with an FWI of 36.1, a minimum humidity of 38% and 4 days without rain. Fires in the area that started in weather like this since 2016: 43.

FWI at the start 36.1
Minimum humidity 38 %
Days without rain 4
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Vilar de Perdizes e Meixide fire, August 2025
829 ha 2 days FWI 35.2 Min. humidity 39 % 78 km away, in 2025

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

2 days
median duration
395 ha
median area
28 %
went past 1,000 ha
3.0 mm
rain at the end (median; 22 of 43 had it)

It burned an area similar to its twins (470 ha against a median of 395 ha) and lasted 4 days, against 2 days.

In 21 of 43, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
41km/h · max. gust

It was considered over on 24 Aug, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 22 of 43, with a median of 3.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 14 Aug 2022
After · 31 Aug 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 23 August 2022 the air beside the fire reached 22 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak22 µg/m³
Days over the guideline0 days
PM1031 µg/m³
Optical depth0.95
19 Aug21 Aug23 Aug25 Aug27 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 33Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Portugal

Frequently asked questions

How long did the Mesao Frio fire last?
Copernicus dates it between 21 August 2022 and 24 August 2022: 4 days between the first and last image with fire. According to ICNF, it was detected on 21 August 2022 at 15:02 and declared extinguished on 24 August 2022.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 470 hectares (4.7 km²). Official national figures may differ.
Which freguesias burned?
The fire entered 4 freguesias: Sedielos (244 ha, 19 %); Vila Marim (136 ha, 16 %); Mesão Frio (Santo André) (88 ha, 12 %); Teixeira e Teixeiró (3 ha, 0.1 %).
Did the fire reach a town?
The fire started in Vila Marim and reached its centre: the point marking it was inside the burnt area or less than 500 metres from it. That does not mean houses burned.
What was the weather like?
During the fire the temperature reached 30.7 °C, humidity dropped to 35 % and gusts hit 41 km/h. The fire danger index (FWI) reached 36, class High.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Portugal (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 43. Their median duration was 2 days and their median area 395 ha; 28 % went past 1,000 ha. In 21 of 43, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 33 Suomi-NPP VIIRS detections on those dates.
  • Compared with ICNF: 433 official ha against 470 ha of perimeter; they agree within 25%.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Freguesia boundaries come from geoBoundaries ADM3 (CC0 1.0 Universal (CC0 1.0) Public Domain Dedication). The area per freguesia is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.