Skip to content
worldfires
MM · Myanmar · –

Loikaw fire, 28 February 2026 Loikaw, Shadaw, Mawkmai

Out · last detection 18 Mar 2026, 06:37 UTC

The fire started on 28 February 2026 in Loikaw, Myanmar, and satellites saw it burning for 19 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 10,615 hectares from heat detections, spread across 3 municipalities.

Number 43 in Myanmar in 2026, of 480.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

The power measured by the satellite is low (24.3 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Compare with…
Burnt area
10,615ha
GWIS perimeter (Copernicus)
Duration
19days
28 Feb 2026 – 18 Mar 2026
Municipalities hit
3
municipalities
Started on
28 Feb
2026
Heat detections
266
in a single hotspot: 24 MW
Danger at start
19
Moderate · FWI index
Average daily power
76MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 28 Feb18 Mar
18 Mar 2026

How it evolved, day by day

28 Feb 2026 · 24 MW · 9 1 Mar 2026 · 277 MW · 52 2 Mar 2026 · 90 MW · 35 3 Mar 2026 · 34 MW · 13 4 Mar 2026 · 23 MW · 9 5 Mar 2026 · 201 MW · 29 6 Mar 2026 · 110 MW · 21 7 Mar 2026 · 134 MW · 43 8 Mar 2026 · 62 MW · 17 9 Mar 2026 · 65 MW · 16 10 Mar 2026 · 7 MW · 2 13 Mar 2026 · 63 MW · 10 16 Mar 2026 · 5 MW · 3 17 Mar 2026 · 24 MW · 6 18 Mar 2026 · 18 MW · 1
1 Mar 6 Mar 9 Mar 16 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
34km/h · peak gust
28%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started. Rain came after the fire: 1.5 mm on 21 Mar.

This area had burned before

52% of the perimeter overlaps earlier fires recorded since 2016: 2,428 ha in 2016, 836 ha in 2017, 1,710 ha in 2018, 2,528 ha in 2020, 1,138 ha in 2021, 969 ha in 2022, 721 ha in 2023, 1,448 ha in 2024, 3,799 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 5,511 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 6.7% of the area of London (106 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Loikaw where it started
    5,452 ha reached on 28 Feb
    3.5 %
  2. 3,586 ha reached on 28 Feb
    1.6 %
  3. 1,698 ha reached on 28 Feb
    0.7 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.52 ha
Residents≈ 150

Inside the perimeter there were about 0.52 hectares of built-up land and about 150 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
28 Feb 32.3 °C 36 % 34 km/h 0.0 mm Moderate 19
1 Mar 32.2 °C 35 % 25 km/h 0.0 mm Moderate 20
2 Mar 32.7 °C 31 % 20 km/h 0.0 mm Moderate 21
3 Mar 33.1 °C 31 % 23 km/h 0.0 mm High 22
4 Mar 31.9 °C 36 % 27 km/h 0.0 mm High 22
5 Mar 32.4 °C 40 % 24 km/h 0.0 mm High 22
6 Mar 32.4 °C 43 % 32 km/h 0.0 mm High 23
7 Mar 34.4 °C 33 % 28 km/h 0.0 mm High 23
8 Mar 35.4 °C 28 % 25 km/h 0.0 mm High 25
9 Mar 35.5 °C 30 % 22 km/h 0.0 mm High 26
10 Mar 33.0 °C 45 % 32 km/h 0.0 mm High 23
11 Mar 29.7 °C 47 % 27 km/h 3.2 mm Very low 4
12 Mar 32.2 °C 37 % 25 km/h 1.8 mm Low 8
13 Mar 28.9 °C 53 % 28 km/h 4.6 mm Very low 3
14 Mar 30.2 °C 50 % 29 km/h 2.6 mm Very low 3
15 Mar 31.9 °C 47 % 28 km/h 2.1 mm Very low 4
16 Mar 31.6 °C 41 % 26 km/h 0.1 mm Moderate 12
17 Mar 32.3 °C 38 % 28 km/h 0.0 mm Moderate 16
18 Mar 33.9 °C 35 % 23 km/h 0.0 mm Moderate 18
19 Mar after 34.8 °C 30 % 26 km/h 0.0 mm Moderate 21
20 Mar after 33.3 °C 35 % 20 km/h 0.0 mm High 21
21 Mar after 33.6 °C 42 % 31 km/h 1.5 mm Moderate 12

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 21 Feb 2026
After · 25 Mar 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 4 March 2026 the air beside the fire reached 127 µg/m³ of PM2.5. That day averaged 69: 4.6 times the WHO daily guideline (15).

PM2.5 peak127 µg/m³
Days over the guideline19 days
PM10131 µg/m³
Optical depth1.20
26 Feb2 Mar6 Mar10 Mar14 Mar
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 266Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Myanmar

Frequently asked questions

How long did the Loikaw fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 28 February 2026 to 18 March 2026 (19 days). The perimeter dates it from 28 February 2026 to 13 March 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 10,615 hectares (106.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Loikaw (5,452 ha, 3.5 %); Shadaw (3,586 ha, 1.6 %); Mawkmai (1,698 ha, 0.7 %).
What was the weather like?
During the fire the temperature reached 35.5 °C, humidity dropped to 28 % and gusts hit 34 km/h. The fire danger index (FWI) reached 26, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Myanmar (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 13 March 2026 → 18 March 2026.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 28 February 2026 to 13 March 2026. 266 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.