Skip to content
worldfires
BR · Brazil · –

Lagoa da Confusão fire, 20 August 2016 Lagoa da Confusão

Out · last detection 25 Aug 2016, 17:46 UTC

The fire started on 20 August 2016 in Lagoa da Confusão, Brazil, and satellites saw it burning for 5 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 14,504 hectares from heat detections, spread across a single municipality.

It is the 97th largest in Tocantins since 2016 (of 1036 with a page). Number 43 in Brazil in 2016, of 648.

Burnt area
14,504ha
GWIS perimeter (Copernicus)
Duration
5days
20 Aug 2016 – 24 Aug 2016
Municipalities hit
1
municipalities
Started on
20 Aug
2016
Heat detections
472
in a single hotspot: 88 MW
Danger at start
64
Extreme · FWI index
Average daily power
653MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 20 Aug24 Aug
25 Aug 2016

How it evolved, day by day

20 Aug 2016 · 270 MW · 15 21 Aug 2016 · 37 MW · 7 22 Aug 2016 · 2,000 MW · 240 23 Aug 2016 · 902 MW · 111 24 Aug 2016 · 701 MW · 98 25 Aug 2016 · 9 MW · 1
20 Aug 22 Aug 24 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

39°high
49km/h · peak gust
19%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 9.2% of the area of London (145 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Lagoa da Confusão 15,288 inhabitants where it started
    14,617 ha reached on 20 Aug
    1.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 46 % of the area in Brazil 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
20 Aug 37.9 °C 27 % 42 km/h 0.0 mm Extreme 64
21 Aug 38.6 °C 23 % 40 km/h 0.0 mm Very high 41
22 Aug 34.9 °C 29 % 36 km/h 0.0 mm Very high 50
23 Aug 37.2 °C 23 % 29 km/h 0.0 mm Very high 48
24 Aug 39.2 °C 19 % 49 km/h 0.0 mm Very extreme 76
25 Aug after 37.5 °C 23 % 46 km/h 0.0 mm Very extreme 71
26 Aug after 37.9 °C 19 % 42 km/h 0.0 mm Extreme 68
27 Aug after 37.9 °C 22 % 40 km/h 0.0 mm Extreme 65
28 Aug after 36.7 °C 29 % 44 km/h 0.1 mm Extreme 68
29 Aug after 37.9 °C 21 % 42 km/h 0.0 mm Extreme 64
30 Aug after 39.6 °C 18 % 31 km/h 0.0 mm Extreme 61
31 Aug after 39.1 °C 20 % 27 km/h 0.0 mm Very high 44
1 Sept after 38.6 °C 22 % 26 km/h 0.0 mm Extreme 58
2 Sept after 39.2 °C 21 % 36 km/h 0.0 mm Extreme 68
3 Sept after 37.8 °C 22 % 42 km/h 0.0 mm Very extreme 71

Its twins: fires that started in the same weather

It started with an FWI of 64.0, a minimum humidity of 27% and more than two months without rain. Fires in the area that started in weather like this since 2016: 23.

FWI at the start 64.0
Minimum humidity 27 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Pium fire, August 2019
41,373 ha 48 days FWI 62.8 Min. humidity 27 % 130 km away, in 2019

First rain (1 mm or more) after it ended: 14.9 mm on 29 Sept.

What happened to them

11 days
median duration
4,829 ha
median area
17 %
went past 10,000 ha
4.4 mm
rain at the end (median; 4 of 23 had it)

It was 3.0 times larger than the median of its twins and lasted 5 days, against 11 days.

Only 2 of its 23 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 19 of 23, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.4 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
49km/h · max. gust

It was considered over on 24 Aug, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 4 of 23, with a median of 4.4 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 13 Aug 2016
After · 31 Aug 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 472Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Lagoa da Confusão fire last?
GWIS (Copernicus) dates it between 20 August 2016 and 24 August 2016: 5 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 14,504 hectares (145.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Lagoa da Confusão (14,617 ha, 1.4 %).
What was the weather like?
During the fire the temperature reached 39.2 °C, humidity dropped to 19 % and gusts hit 49 km/h. The fire danger index (FWI) reached 76, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 23. Their median duration was 11 days and their median area 4,829 ha; 17 % went past 10,000 ha. Only 2 of its 23 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 19 of 23, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.4 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 472 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.