Burned area
satellite only5,037ha
Perimeter published by GWIS (Copernicus).
- Source
- GWIS (Copernicus)
- Date
- 5 Jun 2025 – 16 Jun 2025
+− cross-check
No official record is matched to this page to compare it with.
RU · Russia · –
Khiloksky District fire, 5 June 2025 Khiloksky District
Out · last detection 16 Jun 2025, 05:56 UTC
The fire started on 5 June 2025 in Khiloksky District, Russia, and satellites saw it burning for 12 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,037 hectares from heat detections, spread across a single municipality.
It is the 262th largest in Zabaykalsky Krai since 2016 (of 465 with a page). Number 138 in Russia in 2025, of 238.
Use this data
Compare with…
Use this data
Fire page data · version 2026-10-27matches the official recordwith caveatssatellite onlymodel
When copying, the sentence is
Tick the figures you want: they make up the lede and the CSV.
Duration by satellite
satellite only12days
5 Jun 2025 to 16 Jun 2025: first and last day with fire on the page.
- Source
- GWIS (Copernicus) · NASA FIRMS · VIIRS
- Date
- last detection: 16 Jun 2025, 05:56 UTC
+− cross-check
Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.
Start
satellite only5 Jun 2025
First day with fire seen by the satellites or the perimeter.
- Source
- GWIS (Copernicus) · NASA FIRMS · VIIRS
- Date
- 5 Jun 2025
+− cross-check
No official record is matched to this page, so the alert time and the cause are not known here.
The worst day
satellite only1,828MW
Total radiative power on 9 June 2025; hotspots that day: 113.
- Source
- NASA FIRMS · VIIRS (FRP)
- Date
- 9 Jun 2025
+− cross-check
Fire radiative power (FRP) measures the energy the fire gives off when the satellite passes. Added up by day, it compares intensity, not area.
Danger at the start
model25.2FWI · high
Fire Weather Index (Canadian system) computed by WorldFires for the day the fire started. Consecutive days without rain before: 1.
- Source
- WorldFires calculation (Canadian FWI system)
- Date
- 5 Jun 2025, local noon
- Model
- ERA5 0,25° (ECMWF · Copernicus C3S) · Open-Meteo.com
+− cross-check
This is an index computed from weather model data, not a measurement of the fire nor an official warning. Danger warnings are issued by each country’s authority. Emergency number and official warnings
Weather during the fire
model25.6°C · 29% RH
High of 25.6 °C and minimum humidity of 29% on 16 June 2025; gusts of 63 km/h on 5 June 2025.
- Source
- weather model at the fire’s grid cell
- Date
- 5 Jun 2025 – 16 Jun 2025
- Model
- ERA5 0,25° (ECMWF · Copernicus C3S) · Open-Meteo.com
+− cross-check
These are model values for a cell of about 25 km, not from a weather station: they may differ from what was measured on the ground.
This page’s change log has been kept since 24 October 2026: every night what it publishes is compared and the difference is logged. Anything earlier is reconstructed from each source’s date and marked as reconstructed.
Show
-
· reconstructed weatherWeather and FWI computed from the ERA5 reanalysis
-
logStart date: 29 May 2025 → 5 June 2025.
-
logStart date: 5 June 2025 → 29 May 2025.
-
· reconstructed GHSLPopulation and built-up area computed
Area logged each night
Move the slider to see which area the page published each day.
Versioned permanent link
https://worldfires.org/en/fire/khiloksky-district-2025-06-2?v=2026-10-27A version keeps the area, dates, name and official record; the area as it was logged (changes under 2% are not logged). The map, hotspots and weather always show today’s data.
Citation
A lede of about 60 words figures only, no adjectives
CSV for this fire khiloksky-district-2025-06-2.csv · daily, no individual hotspots
| fecha | focos_viirs | frp_mw | tmax_c | tmin_c | hr_min_pct | viento_max_kmh | racha_max_kmh | precip_mm | fwi | clase_fwi | dentro_del_incendio |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2025-06-05 | 15 | 88 | 15.5 | 5.3 | 28 | 28.6 | 62.6 | 0 | 25.2 | alto | 1 |
| 2025-06-06 | 35 | 565 | 21.2 | 4.1 | 27 | 14.9 | 35.6 | 0 | 22 | alto | 1 |
| 2025-06-07 | 72 | 1,251 | 22.6 | 6.3 | 16 | 24.9 | 55.4 | 0 | 37 | alto | 1 |
| 2025-06-08 | 40 | 831 | 16.3 | 3.1 | 30 | 14.9 | 37.1 | 0.3 | 26 | alto | 1 |
| 2025-06-09 | 113 | 1,828 | 23.8 | 2.5 | 18 | 11.8 | 30.6 | 0 | 27.5 | alto | 1 |
| 2025-06-10 | 6 | 18 | 21.6 | 5.9 | 27 | 19.5 | 42.8 | 2.1 | 12.6 | moderado | 1 |
| 2025-06-11 | 2 | 9 | 23.3 | 9.3 | 29 | 13 | 32.8 | 2.1 | 8.2 | bajo | 1 |
| 2025-06-12 | 2 | 10 | 23.3 | 5.3 | 34 | 11 | 27.4 | 0 | 15.5 | moderado | 1 |
| 2025-06-13 | 2 | 2 | 20 | 11.1 | 39 | 18.6 | 43.2 | 0 | 20.5 | moderado | 1 |
| 2025-06-14 | 45 | 384 | 22.7 | 5.8 | 30 | 14.9 | 35.6 | 0 | 22.6 | alto | 1 |
| 2025-06-15 | 17 | 60 | 23.4 | 8.3 | 41 | 25.4 | 55.1 | 1.2 | 19.3 | moderado | 1 |
| 2025-06-16 | 19 | 124 | 25.6 | 7.9 | 29 | 12.1 | 26.3 | 0 | 21.8 | alto | 1 |
| 2025-06-17 | 0 | 0 | 21.8 | 13.2 | 54 | 15.9 | 34.6 | 5.1 | 3.8 | muy_bajo | 0 |
It is generated in your browser from this page’s data: one file per fire, aggregated by day and without individual hotspots.
Live widget for your story
It updates itself while the fire is still active and links to this page. Free, with the attribution shown at the bottom.
Sources for this page: GWIS (Copernicus), NASA FIRMS (VIIRS), ERA5 (ECMWF/Copernicus C3S) · Open-Meteo.com (CC BY 4.0), GHSL (JRC). Open-Meteo.com · How we build fire pages: methodology
- Burnt area
- 5,037ha
- GWIS perimeter (Copernicus)
- Duration
- 12days
- 5 Jun 2025 – 16 Jun 2025
- Municipalities hit
- 1
- districts
- Started on
- 5 Jun
- 2025
- Heat detections
- 368
- in a single hotspot: 0 MW
- Danger at start
- 25
- High · FWI index
- Average daily power
- 431MW
- detected power per day, on average
Where it burned
HOTSPOTS BY DAY
5 Jun16 Jun
16 Jun 2025
How it evolved, day by day
5 Jun
9 Jun
14 Jun
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
26°high
63km/h · peak gust
16%lowest humidity
It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 5.1 mm on 17 Jun.
This area had burned before
10% of the perimeter overlaps earlier fires recorded since 2016: 500 ha in 2017.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Moscow boundary: geoBoundaries · OpenStreetMap, Wambacher · © OpenStreetMap contributors (ODbL 1.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Khiloksky District where it started5,015 ha0.3 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2025Built-up area< 0.1 ha
Residents< 20
Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
Started with Strong wind: 10.0 % of the area in Russia
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 5 Jun | 15.5 °C | 28 % | 63 km/h | 0.0 mm | High 25 |
| 6 Jun | 21.2 °C | 27 % | 36 km/h | 0.0 mm | High 22 |
| 7 Jun | 22.6 °C | 16 % | 55 km/h | 0.0 mm | High 37 |
| 8 Jun | 16.3 °C | 30 % | 37 km/h | 0.3 mm | High 26 |
| 9 Jun | 23.8 °C | 18 % | 31 km/h | 0.0 mm | High 28 |
| 10 Jun | 21.6 °C | 27 % | 43 km/h | 2.1 mm | Moderate 13 |
| 11 Jun | 23.3 °C | 29 % | 33 km/h | 2.1 mm | Low 8 |
| 12 Jun | 23.3 °C | 34 % | 27 km/h | 0.0 mm | Moderate 16 |
| 13 Jun | 20.0 °C | 39 % | 43 km/h | 0.0 mm | Moderate 20 |
| 14 Jun | 22.7 °C | 30 % | 36 km/h | 0.0 mm | High 23 |
| 15 Jun | 23.4 °C | 41 % | 55 km/h | 1.2 mm | Moderate 19 |
| 16 Jun | 25.6 °C | 29 % | 26 km/h | 0.0 mm | High 22 |
| 17 Jun after | 21.8 °C | 54 % | 35 km/h | 5.1 mm | Very low 4 |
Its twins: fires that started in the same weather
It started with an FWI of 25.2, a minimum humidity of 28% and 1 day without rain. Fires in the area that started in weather like this since 2016: 19.
FWI at the start
25.2
Minimum humidity
28 %
Days without rain
1
this fire
chosen twins
rest of the area
Almost identicalSimilar
Outlines of the closest twins
This fire · Khiloksky District fire, 5 June 2025
5,037 ha
12 days
FWI 25.2
Min. humidity 28 %
Kyrinsky District fire, June 2017
33,556 ha
33 days
FWI 25.1
Min. humidity 28 %
195 km away, in 2017
First rain (1 mm or more) after it ended: 21.6 mm on 7 Jul.
Khiloksky District fire, June 2017
3,735 ha
9 days
FWI 26.9
Min. humidity 25 %
14 km away, in 2017
First rain (1 mm or more) after it ended: 1.3 mm on 3 Jul.
Khorinsky Rayon fire, July 2016
9,433 ha
7 days
FWI 24.8
Min. humidity 29 %
193 km away, in 2016
First rain (1 mm or more) after it ended: 3.2 mm on 10 Jul.
Khiloksky District fire, June 2017
15,305 ha
12 days
FWI 30.7
Min. humidity 26 %
24 km away, in 2017
First rain (1 mm or more) after it ended: 2.6 mm on 3 Jul.
Akshinsky District fire, May 2022
7,710 ha
5 days
FWI 26.0
Min. humidity 24 %
191 km away, in 2022
First rain (1 mm or more) after it ended: 3.1 mm on 23 May.
What happened to them
- 7 days
- median duration
- 4,360 ha
- median area
- 16 %
- went past 10,000 ha
- 3.2 mm
- rain at the end (median; 18 of 19 had it)
It burned an area similar to its twins (5,037 ha against a median of 4,360 ha) and lasted 12 days, against 7 days.
In 1 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.2 mm.
This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it
How it ended
5.1 mmfirst rain
17 Junthe day after it ended
63km/h · max. gust
It was considered over on 16 Jun, and on 17 Jun 5.1 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 18 of 19, with a median of 3.2 mm.
Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
How a twin is chosen
- Same area: fires that have already ended, less than 250 km from this one, since 2016.
- Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
- Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
- Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
- They are sorted by similarity, and the outlines of the first five are drawn.
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
↔
Before · 29 May 2025
After · 23 Jun 2025
Sentinel-2 did not pass over on that day. Try another date, or use false colour, which is daily.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 8 June 2025 the air beside the fire reached 194 µg/m³ of PM2.5. That day averaged 98: 6.5 times the WHO daily guideline (15).
PM2.5 peak194 µg/m³
Days over the guideline11 days
PM10195 µg/m³
Optical depth2.54
WHO 15
3 Jun7 Jun11 Jun15 Jun19 Jun
Good
Fair
Moderate
Poor
Very poor
Extremely poor
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 0Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV
Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 19,728 haKhiloksky District20 May 2025 · 16 days · 14 km away
- 4,942 haKhiloksky District6 June 2025 · 11 days · 14 km away
- 16,960 haKhiloksky District20 June 2025 · 9 days · 24 km away
- 16,290 haKhiloksky District4 June 2025 · 13 days · 24 km away
- 15,305 haKhiloksky District21 June 2017 · 12 days · 24 km away
- 4,789 haKhiloksky District12 June 2025 · 16 days · 25 km away
Frequently asked questions
- How long did the Khiloksky District fire last?
- GWIS (Copernicus) dates it between 5 June 2025 and 16 June 2025: 12 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,037 hectares (50.4 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Khiloksky District (5,015 ha, 0.3 %).
- What was the weather like?
- During the fire the temperature reached 25.6 °C, humidity dropped to 16 % and gusts hit 63 km/h. The fire danger index (FWI) reached 37, class High.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
- How did the fires that started in similar weather in this area end?
- Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 19. Their median duration was 7 days and their median area 4,360 ha; 16 % went past 10,000 ha. In 1 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.2 mm.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 112 · Emergency number and official warnings
Satellite cross-check
History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
- Start date: 29 May 2025 → 5 June 2025.
- Start date: 5 June 2025 → 29 May 2025.
RSS Changes to this page With cross-checks and a citable version
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.