Skip to content
worldfires
RU · Russia · →

Khiloksky District fire, 4 June 2025 Khiloksky District

Out · last detection 16 Jun 2025, 05:56 UTC

The fire started on 4 June 2025 in Khiloksky District, Russia, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 16,290 hectares from heat detections, spread across a single municipality.

It is the 62th largest in Zabaykalsky Krai since 2016 (of 465 with a page). Number 41 in Russia in 2025, of 246.

Compare with…
Burnt area
16,290ha
GWIS perimeter (Copernicus)
Duration
13days
4 Jun 2025 – 16 Jun 2025
Municipalities hit
1
districts
Started on
4 Jun
2025
Heat detections
999
in a single hotspot: 301 MW
Danger at start
7
Low · FWI index
Average daily power
1.6GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 4 Jun16 Jun
16 Jun 2025

How it evolved, day by day

4 Jun 2025 · 115 MW · 29 5 Jun 2025 · 111 MW · 34 6 Jun 2025 · 2,422 MW · 142 7 Jun 2025 · 4,335 MW · 307 8 Jun 2025 · 621 MW · 92 9 Jun 2025 · 10,915 MW · 282 10 Jun 2025 · 680 MW · 31 11 Jun 2025 · 13 MW · 7 12 Jun 2025 · 143 MW · 12 14 Jun 2025 · 33 MW · 16 15 Jun 2025 · 120 MW · 25 16 Jun 2025 · 238 MW · 22
4 Jun 6 Jun 8 Jun 9 Jun 10 Jun 12 Jun 15 Jun

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

26°high
70km/h · peak gust
19%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 10.2 mm on 17 Jun.

This area had burned before

56% of the perimeter overlaps earlier fires recorded since 2016: 443 ha in 2016, 8,959 ha in 2017, 4 ha in 2022.

How big is it?

10 km
It burned the equivalent of 10% of the area of London (163 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Khiloksky District where it started
    16,203 ha reached on 4 Jun
    1.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
4 Jun 15.9 °C 33 % 70 km/h 2.0 mm Low 7
5 Jun 15.0 °C 30 % 63 km/h 0.0 mm Moderate 15
6 Jun 20.9 °C 28 % 35 km/h 0.0 mm Moderate 17
7 Jun 22.3 °C 24 % 54 km/h 0.0 mm High 26
8 Jun 15.9 °C 35 % 37 km/h 0.1 mm Moderate 19
9 Jun 22.9 °C 19 % 31 km/h 0.0 mm High 22
10 Jun 20.5 °C 30 % 44 km/h 0.7 mm Moderate 21
11 Jun 22.1 °C 31 % 32 km/h 3.0 mm Very low 5
12 Jun 22.9 °C 35 % 27 km/h 0.0 mm Moderate 12
13 Jun 19.2 °C 41 % 44 km/h 0.4 mm Moderate 16
14 Jun 21.3 °C 33 % 36 km/h 0.0 mm Moderate 18
15 Jun 23.0 °C 46 % 55 km/h 2.0 mm Low 10
16 Jun 25.5 °C 31 % 28 km/h 0.0 mm Moderate 16
17 Jun after 20.6 °C 63 % 34 km/h 10.2 mm Very low 0

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 28 May 2025
After · 23 Jun 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 10 June 2025 the air beside the fire reached 169 µg/m³ of PM2.5. That day averaged 92: 6.1 times the WHO daily guideline (15).

PM2.5 peak169 µg/m³
Days over the guideline9 days
PM10170 µg/m³
Optical depth2.09
345678910111213141516171819
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 999Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia ›

Frequently asked questions

How long did the Khiloksky District fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 4 June 2025 to 16 June 2025 (13 days). The perimeter dates it from 5 June 2025 to 16 June 2025.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 16,290 hectares (162.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Khiloksky District (16,203 ha, 1.1 %).
What was the weather like?
During the fire the temperature reached 25.5 °C, humidity dropped to 19 % and gusts hit 70 km/h. The fire danger index (FWI) reached 26, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings ›

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 5 June 2025 → 4 June 2025.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 5 June 2025 to 16 June 2025. 999 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.